Temat: water mist cooling - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The Effect of Water Mist Cooling of Casting Die on the Solidification, Microstructure and Properties of AlSi20 Alloy
Autorzy:: Władysiak, R.
Kozuń, A.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/353825.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: silicon dendrites
casting die cooling
water mist
hypereutectic Al-Si alloy
Opis:: Unmodified AlSi20 alloy were casted at the research station, allowing for sequential multipoint cooling using a dedicated computer- controlled program. This method allows for the formation of the microstructure of hypereutectic AlSi20 alloy and also increases hardness. Primary silicon dendrites were found in the microstructure of cooled samples. Based on these dendrites, the formation of primary silicon particles is explained. Cooling of casting die with a water mist stream causes changes in solidification, which leads to expansion of the boundary layer with columnar crystals and shrinkage of the core zone with equiaxed crystals. It also causes more regular hardness distribution around pre-eutectic Si crystals, which can lead to tensile strength and machinability improvement.
Źródło:: Archives of Metallurgy and Materials; 2017, 62, 1; 187-194
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Shaping the Structure and Properties of High Quality Silumin Castings in Metal Molds Cooled with Water Mist
Autorzy:: Władysiak, R.
Powiązania:: https://bibliotekanauki.pl/articles/381548.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative material
casting technology
cooling
water mist
permanent mould casting
materiał innowacyjny
technologia odlewnicza
chłodzenie
mgła wodna
forma odlewnicza
Opis:: The paper presents some aspects of the theory and technology of high quality silumin castings in metal molds cooled pointed with water mist stream. The results of the work relate to improvement of the properties of silumin casts by affecting the cooling of the liquid silumin in gravity cast in metal mold and the possibility of controlling the solidification and crystallization of the casting. The high efficiency required from the cooling system is a consequence of an optimal selection of parameters of the generated mist and the maximum use of the phenomenon of water droplets evaporation on the surface of the cooled mold. The study showed that sequential spot cooling with use of water mist, characterized by a wide range of control means and a high maximum heat transfer efficiency, enables to control the flow of heat between the casting and the mold and it allows for a layered solidification leading to the realization of the entire cast solidification in the expected way: directional or simultaneous. Consequently, the results are: improvement of the quality of the castings as a result of the elimination of defects and significant reduction in shrinkage porosity in the casting, an increase of the homogeneity and fineness of the microstructure, about 25% increase in the mechanical properties.
Źródło:: Archives of Foundry Engineering; 2013, 13, 2 spec.; 98-105
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Computer control the cooling process in permanent mold casting of Al-Si alloy
Sterowanie komputerowe procesem chłodzenia formy w odlewaniu kokilowym siluminów
Autorzy:: Władysiak, R.
Powiązania:: https://bibliotekanauki.pl/articles/353901.pdf
Data publikacji:: 2013
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative materials & casting technologies
cooling
water mist
Al-Si alloy
innowacyjne materiały i technologie odlewnicze
chłodzenie
mgła wodna
stop Al-Si
Opis:: The paper presents the test results of a computerized control system the sequential cooling process of permanent mold with use of water mist in the gravity die casting process. It describes the process for preparing high-quality casts made of AlSi7Mg alloy that achieves enhanced mechanical properties. A scheme of developed device and drivers for selected methods of sequence cooling for manufacturing of castings made in permanent steel mold was presented here. Also the microstructure and mechanical properties of received aluminium casts were described. It was shown that the use of a computer system to control the water mist cooling point of the mold not only accelerates the cooling of the cast and the gravity die casting cycle shortens, but also it has a positive effect on the microstructure and mechanical properties of castings made of unmodified AlSi7Mg alloy in a raw state.
W pracy przedstawiono wyniki badań komputerowego systemu sterowania sekwencyjnym chłodzeniem kokili mgła wodna w odlewaniu grawitacyjnym. Opisano proces otrzymywania wysokojakościowych odlewów z siluminu AlSi7Mg o podwyższonych właściwościach mechanicznych. Przedstawiono opracowane urządzenie, programy sterujące dla zadanych metod wytwarzania odlewów kokilowych i sekwencji chłodzenia. Przedstawiono mikrostrukturę i własności mechaniczne otrzymanych odlewów siluminowych. W pracy wykazano, że zastosowanie systemu komputerowego do sterowania chłodzeniem punktowego mgła wodna nie tylko przyspiesza stygnięcie odlewu i skraca cykl odlewania kokilowego, ale również korzystnie wpływa na mikrostrukturę i własności mechaniczne odlewów z niemodyfikowanego siluminu AlSi7Mg w stanie surowym.
Źródło:: Archives of Metallurgy and Materials; 2013, 58, 3; 977-980
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Analysis of Crystallization Process of Intensive Cooled AlSi20CuNiCoMg Alloy
Autorzy:: Władysiak, R.
Kozuń, A.
Dębowska, K.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/379541.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
silumin
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewanie kokilowe
mgła wodna
Opis:: The work is a continuation of research concerning the influence of intensive cooling of permanent mold in order to increase the casting efficiency of aluminium alloys using the multipoint water mist cooling system. The paper presents results of investigation of crystallization process and microstructure of multicomponent synthetic hypereutectic alloy AlSi20CuNiCoMg. The study was conducted for unmodified silumin on the research station allowing the cooling of the special permanent sampler using a program of computer control. Furthermore the study used a thermal imaging camera to analyze the solidification process of multicomponent alloy. The study demonstrated that the use of mold cooled with water mist stream allows in wide range to form the microstructure of hypereutectic multicomponent silumin. It leads to higher homogeneity of microstructure and refinement of crystallizing phases of casting.
Źródło:: Archives of Foundry Engineering; 2017, 17, 2; 137-144
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Effect of Water Mist Cooling on Microstructure of Hypereutectic Al-Si Alloy
Autorzy:: Władysiak, R.
Kozuń, A.
Powiązania:: https://bibliotekanauki.pl/articles/382973.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
hypereutectic silumin
microstructure
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
chłodzenie
silumin nadeutektyczny
mikrostruktura
Opis:: The work is a continuation of research on the use water mist cooling in order to increase efficiency of die-casting aluminum alloys using multipoint water mist cooling system. The paper presents results of investigation of crystallization process and microstructure of synthetic hypereutectic AlSi20 alloy. Casts were made in permanent mold cooled with water mist stream. The study was conducted for unmodified AlSi20 alloy and modified with phosphorus, titanium and boron on the research station allowing sequential multipoint cooling using a dedicated program of computer control. The study demonstrated that the use of mold cooled with water mist stream allows the formation of the microstructure of hypereutectic silumins. A wide range of solidification temperature of hypereutectic silumins increases the potential impact of changes in the cooling rate on a size, a number and a morphology of preeutectic silicon and eutectic α+β (Al+Si).
Źródło:: Archives of Foundry Engineering; 2014, 14, 3; 117-122
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Effect of Casting Die Cooling on Solidification Process and Microstructure of Hypereutectic Al-Si Alloy
Autorzy:: Władysiak, R.
Kozuń, A.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/380676.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technology
innovative foundry material
casting die cooling
water mist
hypereutectic silumin
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
odlewanie kokilowe
mgła wodna
silumin nadeutektyczny
Opis:: The work is a continuation of research concerning the influence of intensive cooling of permanent mold in order to increase the casting efficiency of aluminium alloys using the multipoint water mist cooling system. The paper presents results of investigation of crystallization process and microstructure of synthetic hypereutectic alloys: AlSi15 and AlSi19. Casts were made in permanent mold cooled with water mist stream. The study was conducted for unmodified silumins on the research station allowing the cooling of the special permanent probe using a program of computer control. Furthermore the study used a thermal imaging camera to analyze the solidification process of hypereutectic silumins. The study demonstrated that the use of mold cooled with water mist stream allows in wide range the formation of the microstructure of hypereutectic silumins. It leads to higher homogeneity of microstructure and refinement of crystallizing phases and also it increases subsequently the mechanical properties of casting.
Źródło:: Archives of Foundry Engineering; 2016, 16, 4; 175-180
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Structure of water mist stream and its impact on cooling efficiency of casting die
Autorzy:: Władysiak, R.
Budzyński, P.
Powiązania:: https://bibliotekanauki.pl/articles/382910.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewanie kokilowe
mgła wodna
mikrostruktura
strumień ciepła
innovative foundry technologies
innovative foundry material
casting die cooling
water mist
microstructure
heat flux
Opis:: The work is a continuation of research on the use water mist cooling in order to increase efficiency of die-casting aluminum alloys. The paper presents results of research and analysis process, spraying water and generated a stream of water mist, the effect of the type of nozzle, the nozzle size and shape of the emitting of the water mist on the wall surface of casting die on the microstructure and geometry of water mist stream and cooling efficiency. Tests were used to perform high-speed camera to record video in the visible and infrared camera. Results were used to develop a computerized image analysis and statistical analysis. The study showed that there are statistical relationships between water and air flow and geometry of the nozzle and nozzle emitting a stream of microstructure parameters of water mist and heat the incoming stream. These relationships are described mathematical models that allow you to control the generating of adequate stream of water mist and a further consequence, the cooling efficiency of casting die.
Źródło:: Archives of Foundry Engineering; 2012, 12, 2; 251-260
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Effect of multipoint sequential water mist cooling of casting die on microstructure and mechanical properties of AlSi11 alloy
Autorzy:: Władysiak, R.
Powiązania:: https://bibliotekanauki.pl/articles/380430.pdf
Data publikacji:: 2012
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewanie kokilowe
mgła wodna
AlSi11
mikrostruktura
właściwości mechaniczne
innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
microstructure
mechanical properties
Opis:: The work is a continuation of research on the use of water mist cooling in order to increase efficiency of the die-casting process for aluminum alloys. The paper describes the multipoint sequential cooling system of the casting die and its computer control and monitoring. It also includes results of the tests and analysis of cooling methods during making of the casting. These methods differ from each other in the sequence of casting die cooling and cause effective changes in microstructure and mechanical properties of castings made of AlSi11 alloy. The study demonstrated that the use of multipoint sequential cooling with water mist affects the microstructure refinement and reduces the segregation in the cast as well as more than by 20% increases the mechanical properties of castings in the rough state. The study also demonstrates that the sequential cooling of casting die accelerates the cooling of the casting and shortens die-casting cycle.
Źródło:: Archives of Foundry Engineering; 2012, 12, 4; 145-150
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "water mist cooling" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język