Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Heat Recovery" wg kryterium: Temat


Wyświetlanie 1-12 z 12
Tytuł:
Modular heat storage in waste heat recovery installations
Autorzy:
Górszczak, Piotr
Rywotycki, Marcin
Hojny, Marcin
Filo, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/27312237.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
heat storage
heat recovery
waste heat
CFD
Opis:
The paper presents the methodology of designing a system for accumulating waste heat from industrial processes. The research aimed to analyse the fluid’s movement in the heat accumulator to unify the temperature field in the volume of water constituting the heat buffer. Using the computer program Ansys Fluent, a series of computational fluid dynamics simulations of the process of charging the heat storage with water at 60◦C, 70◦C, and 80◦C was carried out. The selected temperatures correspond to the temperature range of unmanaged waste heat. In the presented solution, heat storage is loaded with water from the cooling systems of industrial equipment to store excess heat and use it at a later time. The results of numerical calculations were used to analyse the velocity and temperature fields in the selected structure of the modular heat storage. A novelty in the presented solution is the use of smaller modular heat storage units that allow any configuration of the heat storage system. This solution makes it possible to create heat storage with the required heat capacity.
Źródło:
Archives of Thermodynamics; 2023, 44, 3; 301--323
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Waste Heat Recovery from Servers Using an Air to Water Heat Pump
Autorzy:
Lipiński, Seweryn
Duda, Michał
Górski, D.
Powiązania:
https://bibliotekanauki.pl/articles/2069738.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
air-water heat pump
server cooling
waste heat
heat recovery
domestic hot water
Opis:
The analysis of advisability and profitability of using an air to water heat pump for the purpose of waste heat recovery from servers being used as cryptocurrency mining rigs, was performed. To carry out such an analysis, the cooling unit of the computing server was connected to the heat pump, and the entire system was adequately equipped with devices measuring parameters of the process. Performed experiments proves that the heat pump coefficient of performance (COP) reaches satisfactory values (i.e., an average of 4.21), what is the result of stable and high-temperature source of heat at the pump inlet (i.e., in the range of 29.9-34.1). Economic analysis shows a significant reduction in the cost of heating domestic hot water (by nearly 59-61%). The main conclusion which can be drawn from the paper, is that in a case of having a waste heat source in a form of a server or similar, it is advisable to consider the purchase of air-to-water heat pump for the purpose of domestic hot water heating.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2021, 24(1); 105--113
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza możliwości odzyskiwania i magazynowania ciepła z instalacji chłodniczej tunelu
Analysis of possibilities of recovering and storing heat from cooling installation of the tunnel freezer
Autorzy:
Rudy, S.
Kozak, P.
Krzykowski, A.
Dziki, D.
Polak, R.
Wójcik, J.
Powiązania:
https://bibliotekanauki.pl/articles/93455.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
odzysk ciepła
instalacja chłodnicza
tunel zamrażalniczy
ciepło odpadowe
heat recovery
cooling installation
tunnel freezer
waste heat
Opis:
W pracy przeprowadzono analizę możliwości odzyskiwania i magazynowania energii cieplnej z instalacji chłodniczej fluidyzacyjnego tunelu zamrażalniczego a następnie jej magazynowania. Do odzysku ciepła wykorzystano płytowy wymiennik ciepła umieszczony za sekcją sprężarek a podgrzana woda opuszczająca wymiennik przekazywała ciepło poprzez wężownicę do zasobnika ciepła. Wyznaczono ilość ciepła możliwego do odzyskania z instalacji chłodniczej w zależności od obciążenia tunelu chłodniczego i zmiany temperatury wody w zasobniku w trakcie trwania procesu.
The paper presents the analysis of possibilities of recovering and storing thermal energy from a cooling installation of the fluidization tunnel freezer and then its storing. A plate heat exchanger placed behind a section of compressors was used for heat recovery and the heated water that leaves the exchanger transferred heat through a pipe coil to the heat dispenser. The amount of heat possible to be recovered from cooling installation in relation to burdening of the cooling tunnel and the change of water temperature in a dispenser during the process was determined.
Źródło:
Agricultural Engineering; 2014, 18, 1; 197-208
2083-1587
Pojawia się w:
Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of adsorption chillers for waste heat recovery
Wykorzystanie chłodziarek adsorpcyjnych do zagospodarowania ciepła odpadowego
Autorzy:
Kuchmacz, Jan
Bieniek, Artur
Mika, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/283345.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
waste heat
heat recovery
energy efficiency
adsorption refrigerators
ciepło odpadowe
odzysk ciepła
efektywność energetyczna
chłodziarka adsorpcyjna
Opis:
The purpose of this article was to discuss the use of adsorption chillers for waste heat recovery. The introduction discusses the need to undertake broader measures for the effective management of waste heat in the industry and discusses the benefits and technical problems related to heat recovery in industrial plants. In addition, heat sources for adsorption chillers and their application examples were described. The principle of operation of adsorption chillers is explained in the next chapter. Heat sources for adsorption chillers are indicated and their application examples are described. The above considerations have allowed the benefits and technical obstacles related to the use of adsorption chillers to be highlighted. The currently used adsorbents and adsorbates are discussed later in the article. The main part of the paper discusses the use of adsorption chillers for waste heat management in the glassworks. The calculations assumed the natural gas demand of 20.1 million m3 per year and the electricity demand of 20,000 MWh/year. As a result of conducted calculations, a 231 kW adsorption chiller, ensuring the annual cold production of 2,021 MWh, was selected. The economic analysis of the proposed solution has shown that the investment in the adsorption chiller supplied with waste heat from the heat recovery system will bring significant economic benefits after 10 years from its implementation, even with total investment costs of PLN 1,900,000. However, it was noted that in order to obtain satisfactory economic results the production must meet the demand while the cost of building a heat recovery system shall not exceed PLN 1 million.
Celem artykułu było rozważenie problemu zagospodarowywania ciepła odpadowego przy wykorzystaniu chłodziarek adsorpcyjnych. Na początku wskazano genezę potrzeby podjęcia szerszych działań na rzecz efektywnego zagospodarowywania ciepła odpadowego w przemyśle oraz omówiono korzyści i problemy techniczne związane z odzyskiem ciepła w zakładach przemysłowych. W następnym rozdziale objaśniono zasadę działania chłodziarek adsorpcyjnych. Z kolei wskazano źródła ciepła dla chłodziarek adsorpcyjnych oraz opisano ich przykładowe zastosowania. Powyższe rozważania pozwoliły na uwypuklenie korzyści i barier technicznych związanych z wykorzystywaniem adsorpcyjnych urządzeń chłodniczych. W następnej części pracy scharakteryzowano stosowane obecnie adsorbenty i adsorbaty. W zasadniczej części pracy przeprowadzono analizę wykorzystania chłodziarek adsorpcyjnych do zagospodarowania ciepła odpadowego w hucie szkła. W obliczeniach rozważono przykładową hutę szkła, której zapotrzebowanie na gaz ziemny wynosi 20,1 mln m3/rok, a zapotrzebowanie na energię elektryczną wynosi 20 000 MWh/rok. W efekcie przeprowadzonych kalkulacji dobrano chłodziarkę adsorpcyjną o mocy 231 kW, która zapewni roczną produkcję chłodu wynoszącą 2021 MWh. Analiza ekonomiczna zaproponowanego rozwiązania wykazała, że inwestycja w chłodziarkę adsorpcyjną zasilaną ciepłem odpadowym z instalacji odzysku ciepła przyniesie znaczące korzyści ekonomiczne po 10 latach od jej zrealizowania nawet przy sumarycznych nakładach inwestycyjnych wynoszących 1 900 000 zł. Zaznaczono jednak, że uzyskanie tak zadawalających wyników ekonomicznych będzie możliwe tylko wtedy, gdy w hucie szkła będzie zapewniony ciągły odbiór chłodu, a koszt budowy instalacji odzysku ciepła nie przekroczy 1 mln zł.
Źródło:
Polityka Energetyczna; 2019, 22, 2; 89-106
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Issledovanie ehffektivnosti dizel-gazoturbinnojj ustanovki s termokhimicheskojj regeneraciejj tepla
Analysis of efficiency of diesel-gas turbine power plant with thermochemical heat recovery
Autorzy:
Cherednichenko, A.
Powiązania:
https://bibliotekanauki.pl/articles/76437.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
diesel fuel
gas turbine
power plant
heat recovery system
waste heat
internal combustion engine
caloric value
thermodynamic property
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 2
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alignment of the heat recovery potential with the local area heat demand for selected industrial entities in the city of Gliwice
Autorzy:
Banasik, Aleksandra
Kostowski, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/41185413.pdf
Data publikacji:
2023
Wydawca:
Politechnika Warszawska, Instytut Techniki Cieplnej
Tematy:
waste heat
heat recovery
district heating system
residential sector
energy management
strata ciepła
odzysk ciepła
system ciepłowniczy
sektor mieszkaniowy
zarządzanie energią
Opis:
Waste heat plays a significant role in obtaining the 4th and 5th generation of District Heating (DH) System in cities. This article presents the possibilities of integrating selected waste heat emitters into DH, with the objective of meeting the demand for heat for the selected residential area (approx. 4000 inhabitants) in the city of Gliwice (180 000 inhabitants). The total heating demand of the studied area was estimated at 19 800 GJ including both space heating and domestic hot water. The maximum thermal power was estimated at approx. 2.45 MW. The demand was calculated on the basis of registered metering values for individual buildings which were processed and summarized due to the lack of collective meters for the district. A detailed data classification, correction and completion procedure was elaborated to deal with non-uniform and low-quality data registration. Two industrial objects with waste heat generation were examined to be integrated with the local DH network. The waste heat generation potential equals 9.0 MW for plant #1 and 0.9 MW for plant #2. Apart from the constant generation declared by the industrial entities, realistic profiles including possible shaft-work and maintenance periods were created. It has been shown that the total heat demand for selected residential areas can be covered by integrating waste heat into the current DH network. Depending on the waste heat generation profile, the local area heat demand can be covered entirely or to a large degree (coverage factor ranges from 72 to 100%). The waste heat utilization factor ranges from 6.3 to 8.3%. To manage the remaining waste heat potential, it is required to build additional district heating pipelines and nodes connecting to the existing network to receive an additional 7.45 MW thermal power. The potential of waste heat recovery is significant at the scale of a medium sized city: integrating two large industrial emitters allows up to 13% decarbonization of heats production in the local district heating plan.
Źródło:
Journal of Power Technologies; 2023, 103, 2; 104-117
1425-1353
Pojawia się w:
Journal of Power Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods of Thermal Calculations for a Condensing Waste-Heat Exchanger
Autorzy:
Rączka, P.
Wójs, K.
Powiązania:
https://bibliotekanauki.pl/articles/185363.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odzysk ciepła kondensacji
obliczanie transferu ciepła i masy
wymiennik ciepła
ciepło odpadowe
condensation heat recovery
calculation of heat and mass transfer
heat exchanger
waste heat
Opis:
The paper presents the algorithms for a flue gas/water waste-heat exchanger with and without condensation of water vapour contained in flue gas with experimental validation of theoretical results. The algorithms were used for calculations of the area of a heat exchanger using waste heat from a pulverised brown coal fired steam boiler operating in a power unit with a capacity of 900 MWe. In calculation of the condensing part, the calculation results obtained with two algorithms were compared (Colburn-Hobler and VDI algorithms). The VDI algorithm allowed to take into account the condensation of water vapour for flue gas temperatures above the temperature of the water dew point. Thanks to this, it was possible to calculate more accurately the required heat transfer area, which resulted in its reduction by 19 %. In addition, the influence of the mass transfer on the heat transfer area was taken into account, which contributed to a further reduction in the calculated size of the heat exchanger - in total by 28% as compared with the Colburn-Hobler algorithm. The presented VDI algorithm was used to design a 312 kW pilot-scale condensing heat exchanger installed in PGE Belchatow power plant. Obtained experimental results are in a good agreement with calculated values.
Źródło:
Chemical and Process Engineering; 2014, 35, 4; 447-461
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of possibilities for reusing waste heat to cover needs for heating in Bulten Poland S.A.
Ocena możliwości wykorzystania ciepła odpadowego w celu zaspokojenia zapotrzebowania na moc grzewczą w zakładzie Bulten Polska S.A.
Autorzy:
Broniszewski, M.
Werle, S.
Powiązania:
https://bibliotekanauki.pl/articles/389025.pdf
Data publikacji:
2017
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
energy efficiency
heat recovery
waste heat
SyNiS
industrial energy audit
sustainable development
efektywność energetyczna
odzysk ciepła
ciepło odpadowe
przemysłowy audyt energetyczny
rozwój zrównoważony
Opis:
Contemporary industrial and economic development, due to the dynamic progress of civilization and technology, requires significantly increased amount of energy. For this reason, we are looking for ways to use energy in a smart way, thus improving energy efficiency. One of many possibilities is to recover waste heat from energy-intensive technological processes. The process that creates a great potential for the waste heat collection and management is the process of fasteners’ heat treatment. The aim of the work is to evaluate the possibility of becoming independent from a district heating network in the production of fasteners for automotive industry plant Bulten Poland S.A. The idea is to use heat recovery systems installed on two hardening lines (air/water exchange) and on air compressors (oil/water exchange), which produce the necessary compressed air for bolts production processes. In addition, heat recovery is provided also in the oil bath of one furnace (oil/water exchange). The analyzed solution also assumes installation of two gas boilers, which will take a supporting role in case of extremely low outdoor temperatures and the necessity for increased needs for heat. An essential element of the carried out work is implementation of a superior energy management system (SyNiS), which enables efficient control of the sources’ power and the direction of heat transfer.
Współczesny intensywny rozwój przemysłu i gospodarki, wynikający z dynamicznego postępu cywilizacyjnego i technicznego, wymaga coraz większych nakładów energii. Z tego powodu poszukiwane są możliwości wykorzystywania zużywanej energii w sposób racjonalny, dbając tym samym o poprawę efektywności energetycznej. Jedną z możliwości jest odzyskiwanie ciepła odpadowego z energochłonnych procesów technologicznych. Procesem, który stwarza duży potencjał odbioru i zagospodarowania ciepła odpadowego, jest proces obróbki cieplnej elementów złącznych. Celem pracy jest ocena możliwości uniezależnienia się od dostaw ciepła z miejskiej sieci ciepłowniczej w Zakładzie produkcyjnym elementy złączne dla przemysłu motoryzacyjnego Bulten Polska S.A. Zaproponowano wykorzystanie systemów odzysku ciepła zainstalowanych na dwóch liniach do hartowania wyrobów (wymiana powietrze–woda), oraz na sprężarkach olejowych (wymiana olej–woda), które produkują sprężone powietrze niezbędne w procesach produkcji śrub. Dodatkowo przewidziano odzysk ciepła w wannie olejowej jednego z pieców (wymiana olej–woda). Analizowane rozwiązanie zakłada również instalację dwóch kotłów gazowych, które będą pełnić rolę wspomagającą, w przypadku niższych temperatur zewnętrznych i konieczności dogrzania zakładu. Istotnym elementem przeprowadzonych prac jest wdrożenie nadrzędnego systemu zarządzania energią (SyNiS), umożliwiającego efektywne sterowanie mocą źródeł oraz kierunkiem przesyłu ciepła.
Źródło:
Ecological Chemistry and Engineering. A; 2017, 24, 2; 157-167
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dlaczego ORC jest najlepszym rozwiązaniem do wykorzystania energii odpadowej w cementowni
Why ORC is the best option to recover the waste energy in cement plant
Autorzy:
Duda, J.
Powiązania:
https://bibliotekanauki.pl/articles/392400.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Ceramiki i Materiałów Budowlanych
Tematy:
produkcja klinkieru
piec obrotowy
ciepło odpadowe
odzysk ciepła
wytwarzanie energii
energia elektryczna
kogeneracja
metoda OCR
clinker production
rotary kiln
waste heat
heat recovery
energy manufacturing
electrical energy
cogeneration
ORC method
Opis:
Tradycyjne metody wykorzystania ciepła odpadowego z pieca obrotowego w procesie suszenia surowców i węgla są już niewystarczające. W związku z tym poszukuje się innych sposobów wykorzystania tej energii odpadowej. Metodą, która na świecie jest najczęściej stosowana, jest – na wzór typowej kogeneracji w energetyce – skojarzenie pieca obrotowego z układem do wytwarzania energii elektrycznej. Na przykładzie stosowanych rozwiązań w światowym przemyśle cementowym w artykule uzasadniono wybór metody opartej na układzie ORC.
Traditional methods of utilization of waste heat from the rotary kilns for drying of raw materials and coal are no longer sufficient. Therefore, other ways of waste energy recovering have been explored. The most common method applying in the world wide is electricity generation associated with rotary kiln system, similar to a typical cogeneration in power industry. In the paper, on the example of solutions in the used world cement industry, the choice of method based on the ORC system been justified.
Źródło:
Prace Instytutu Ceramiki i Materiałów Budowlanych; 2012, R. 5, nr 9, 9; 32-43
1899-3230
Pojawia się w:
Prace Instytutu Ceramiki i Materiałów Budowlanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recovery and repurposing of thermal resources in the mining and mineral processing industry
Autorzy:
McLean, Shannon H.
Chenier, Jeffrey
Muinonen, Sari
Laamanen, Corey A.
Scott, John A.
Powiązania:
https://bibliotekanauki.pl/articles/1839039.pdf
Data publikacji:
2020
Wydawca:
Główny Instytut Górnictwa
Tematy:
energy recovery
mining
environmental sustainability
heat pumps
waste heat
odzysk energii
górnictwo
zrównoważenie środowiskowe
pompy ciepła
ciepło odpadowe
Opis:
The consumption of energy contributes significantly to the overall cost of operations and the environmental impact of the mining and mineral processing industry. However, despite a few notable exceptions, most of the resulting waste heat produced is dissipated, without recovery, into the environment. There is also a lot of stored heat in mine water which can be tapped into long after a mine has closed. There is, therefore, significant opportunity to improve the industry's sustainability through increasing the amount of waste heat recovered and repurposed.
Źródło:
Journal of Sustainable Mining; 2020, 19, 2; 115-125
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Organic Rankine cycle for residual heat to power conversion in natural gas compressor station. Part II: Plant simulation and optimisation study
Organiczny obieg rankina do produkcji energii elektrycznej z ciepła odpadowego w tłoczni gazu. Część II: Symulacja i optymalizacja instalacji
Autorzy:
Chaczykowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/219348.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gazociąg
tłocznia gazu
ciepło odpadowe
odzysk energii
optymalizacja
gas pipeline
compressor station
waste heat
energy recovery
optimization algorithms
Opis:
After having described the models for the organic Rankine cycle (ORC) equipment in the first part of this paper, this second part provides an example that demonstrates the performance of different ORC systems in the energy recovery application in a gas compressor station. The application shows certain specific characteristics, i.e. relatively large scale of the system, high exhaust gas temperature, low ambient temperature operation, and incorporation of an air-cooled condenser, as an effect of the localization in a compressor station plant. Screening of 17 organic fluids, mostly alkanes, was carried out and resulted in a selection of best performing fluids for each cycle configuration, among which benzene, acetone and heptane showed highest energy recovery potential in supercritical cycles, while benzene, toluene and cyclohexane in subcritical cycles. Calculation results indicate that a maximum of 10.4 MW of shaft power can be obtained from the exhaust gases of a 25 MW compressor driver by the use of benzene as a working fluid in the supercritical cycle with heat recuperation. In relation to the particular transmission system analysed in the study, it appears that the regenerative subcritical cycle with toluene as a working fluid presents the best thermodynamic characteristics, however, require some attention insofar as operational conditions are concerned.
W pierwszej części artykułu przedstawiono modele matematyczne elementów siłowni ORC, natomiast niniejsza, druga część artykułu, zawiera przykład ilustrujący efektywność różnych systemów ORC w instalacji odzysku ciepła w stacji przetłocznej. W wyniku lokalizacji w stacji przetłocznej, instalacja wyróżnia się pewnymi charakterystycznymi cechami, takimi jak stosunkowo duża wielkość systemu, praca przy niskich temperaturach otoczenia, zastosowanie skraplacza chłodzonego powietrzem. Obliczenia optymalizacyjne przeprowadzone dla 17 płynów pozwoliły na wybór odpowiednich czynników roboczych dla każdej konfiguracji obiegu, wśród których benzen, aceton i heptan wykazały najwyższą możliwość odzysku energii w obiegach nadkrytycznych, podczas gdy benzen, toluen i cykloheksan w obiegach podkrytycznych. Wyniki obliczeń pokazują, że dysponując strumieniem spalin z turbiny gazowej o mocy 25 MW, za pomocą benzenu jako czynnika roboczego, można uzyskać w obiegu nadkrytycznym z regeneracją ciepła maksymalną moc mechaniczną na wale turbiny wynoszącą 10,4 MW.W odniesieniu do systemu przesyłowego analizowanego w tej pracy najlepszym wariantem siłowni ORC z punktu widzenia charakterystyki termodynamicznej jest obieg nadkrytyczny z regeneracją ciepła przy zastosowaniu toluenu jako czynnika roboczego, jednak jego stosowanie mogłoby powodować problemy eksploatacyjne podczas użytkowania instalacji.
Źródło:
Archives of Mining Sciences; 2016, 61, 2; 259-274
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Organic Rankine cycle for residual heat to power conversion in natural gas compressor station. Part I: Modelling and optimisation framework
Organiczny obieg Rankina do produkcji energii elektrycznej z ciepła odpadowego w tłoczni gazu. Część I: Model matematyczny systemu i sformułowanie zadania optymalizacji
Autorzy:
Chaczykowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/219914.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gazociąg
tłocznia gazu
ciepło odpadowe
odzysk energii
optymalizacja
gas pipeline
compressor station
waste heat
energy recovery
optimization algorithms
Opis:
Basic organic Rankine cycle (ORC), and two variants of regenerative ORC have been considered for the recovery of exhaust heat from natural gas compressor station. The modelling framework for ORC systems has been presented and the optimisation of the systems was carried out with turbine power output as the variable to be maximized. The determination of ORC system design parameters was accomplished by means of the genetic algorithm. The study was aimed at estimating the thermodynamic potential of different ORC configurations with several working fluids employed. The first part of this paper describes the ORC equipment models which are employed to build a NLP formulation to tackle design problems representative for waste energy recovery on gas turbines driving natural gas pipeline compressors.
W artykule analizowano organiczny obieg Rankine’a (ORC) w wariancie podstawowym i z regeneracją ciepła, w celu odzyskiwania ciepła odpadowego w tłoczni gazu. Przedstawiono model matematyczny elementów systemu oraz sformułowano problem optymalizacji systemu, przyjmując maksymalizację mocy elektrycznej produkowanej w instalacji odzysku ciepła jako funkcję celu. Zadanie optymalizacji rozwiązano z wykorzystaniem algorytmu genetycznego. Celem badań było oszacowanie potencjalnych możliwości produkcji energii elektrycznej przy różnych konfiguracjach układu ORC oraz przy różnych czynnikach roboczych. W pierwszej części pracy przedstawiono uproszczony model matematyczny obiegu ORC, który posłużył do sformułowania zadania programowania nieliniowego, pozwalającego na rozwiązywanie typowych problemów projektowych instalacji odzysku ciepła z turbin gazowych w stacjach przetłocznych gazu.
Źródło:
Archives of Mining Sciences; 2016, 61, 2; 245-258
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies