Temat: valvetrain - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Researches on friction force between valve made of tial and its guide made of phosphorous bronze
Autorzy:: Siczek, K.
Powiązania:: https://bibliotekanauki.pl/articles/243568.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: valvetrain
lightweight valve
friction force
TiAl alloy
phosphorous bronze
Opis:: A lightweight valve can be one made of steel but with a drilled stem. Another one can be made of TiAl alloys and its stem can be full or drilled. Lightweight valve can be also ceramic one made of Si3N4. Such valves can mate with guides made of cast iron or of phosphorous bronze in varying conditions in their common contact zone. The aim of researches has been to measure friction force in contact zone between valve stem made of TiAl alloy and its guide made of phosphorous bronze, in the absence of oil. The conditions of room temperature and of the atmosphere pressure have been used during experiment. Mentioned researches have been provided in tester, which design has been presented in the article. The loading of contact zone has varied periodically during serie. The displacement and acceleration of valve and the force during its impact into seat insert have been measured during tests. Additionally the sound level has been measured, either. Tests have been provided for different frequency of driving force. Obtained results of researches has been shown in the article. In all cases the measured sound level have been equal 94 dBA, when sound level of laboratory environment has been equal 40 dBA. Values for coefficient of friction between valve stem and its guide can change from 0.12 to 0.16 and decrease almost linearly with increasing of loading frequency. Values of dry friction coefficient between valve stem made of TiAl alloy and coated by chrome and its guide made of phosphorous bronze can be smaller up to 17% than values obtained in case of valve stem coated by nc-WC/a-C:H mating with a guide made of cast iron.
Źródło:: Journal of KONES; 2013, 20, 1; 295-301
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The researches on the friction properties of nc-WC/a-C : H coating on the lightweight valve stem
Autorzy:: Siczek, K.
Powiązania:: https://bibliotekanauki.pl/articles/246658.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: nc-WC/a-C coating
TiAl alloy
lightweight valve
valvetrain
friction coefficient
Opis:: The lightweight valves, especially made of TiAl alloys, are more and more often used in modern combustion engines with cam and camless valvetrain. To increase the wear resistance and to decrease the coefficient of friction between valve steam and valve guide, different kinds of the coating are used. The researched valve has been outlet one made of TiAl6Zr4Sn2Mo2 alloy with the original chrome coating on the valve stem. The nc-WC/a-C:H nanocoating has been deposited on the chromed stem of researched valve, which has mated with the guide made of cast iron. The aim of the present paper is to investigate friction properties of such nc-WC/a-C:H deposited onto the chromed and polished surface of the valve stem. The scheme of research stand has been presented in the paper. On the stand it has been possible to measure values of valve lift and of valve acceleration, the impact force between valve and its seat insert, the friction force between valve stem and its guide, the temperature values for valve guide and for seat insert and a sound level during impacting. Researches have been performed in conditions of room temperature and without oil lubrication in the valve stem - guide contact zone. Basing on the measured values of friction force between valve stem and its guide vs. time and loading frequency, the coefficient of friction has been estimated. Obtained curves of friction force and of friction coefficient vs. time, for different frequency values of valve loading have been presented in the article.
Źródło:: Journal of KONES; 2012, 19, 2; 493-500
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The effect of machined valve springs application on dynamic properties of electro-hydraulically driven valve train
Autorzy:: Szydłowski, Tomasz
Siczek, Krzysztof
Głogowski, Michał
Powiązania:: https://bibliotekanauki.pl/articles/2202518.pdf
Data publikacji:: 2022
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: electro-hydraulic drive
valvetrain
machined valve spring
dynamics
napęd elektrohydrauliczny
rozrząd silnika
sprężyna zaworu
dynamika
Opis:: Nowadays, the constant striving to reduce the emission and increase the overall efficiency over a wide range of speeds and loads of the internal combustion engine (CE) is observed. The different methods for improving the charge exchange in the engine, particularly ones based on the variable valve timing are sought. This variability can be achieved, among others by using the electrohydraulic valve drive. The goal of the present study is to compare the dynamic parameters of the engine valvetrain utilizing the unilateral electrohydraulic valve drive and various types of valve springs. The model of such a drive being developed by authors and experimentally verified was used for the analysis. Using the Finite Element Method, the models of springs made through the machining from single sleeves were developed. The effect of various geometrical parameters of the modernized springs on their stiffness and on the resulted valvetrain dynamics was examined.
Źródło:: Combustion Engines; 2022, 61, 4; 92--120
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The effect of the design and material parameters on the temperature gradient in lightweight valves in the valvetrains of combustion engines
Wpływ parametrów konstrukcyjnych i materiałowych na rozkład temperatury w lekkich zaworach rozrządu silników spalinowych
Autorzy:: Siczek, K.
Powiązania:: https://bibliotekanauki.pl/articles/133947.pdf
Data publikacji:: 2013
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: combustion engine
valvetrain
lightweight valve
temperature gradient
silnik spalinowy
rozrząd silnika
lekki zawór
rozkład temperatury
Opis:: According to the current trend to reduce the valvetrain movable masses in combustion engines lightweight valves are used increasingly. They can be made of light alloys from the TiAl alloy group or of ceramic materials such as silicon nitride. They are often coated with additional protective layers to reduce the resistance of friction or the wear intensity. They may also be a hollow structure made of steel with internal reinforcing ribs. Compared to traditional full steel valves they are characterized by different temperature gradients when working in a valvetrain. As a result, their working change, particularly the intensity of the heat transfer and wear. The paper presents valve models developed with the FEM technique for several design and material configurations for lightweight intake and exhaust valves operating under conditions similar to those made of steel. Also the temperature gradients of the discussed valves have been included and compared to those of full steel valves.
Zgodnie z obecną tendencją do zmniejszania mas ruchomych rozrządu w silnikach spalinowych stosowane są lekkie zawory. Mogą być one wykonane z lekkich stopów z grupy TiAl lub z materiałów ceramicznych jak azotek krzemu. Często są powlekane dodatkowymi warstwami ochronnymi dla zmniejszenia oporów tarcia lub intensywności zużycia. Mogą to być też zawory stalowe drążone, z ewentualnym zastosowaniem wewnętrznych żeber wzmacniających. W stosunku do klasycznych pełnych zaworów stalowych odznaczają sie one innym rozkładem temperatury podczas pracy w rozrządach. W efekcie zmieniają się ich warunki pracy, a zwłaszcza intensywność odbioru ciepła i zużywania. W artykule przedstawiono opracowane modele zaworu, wykonane przy użyciu MES, dla kilku konfiguracji konstrukcyjnych i materiałowych lekkich zaworów dolotowych i wylotowych, pracujących w zbliżonych warunkach jak pełne zawory stalowe. Zamieszczono też obliczone rozkłady temperatury i porównano je z przypadkiem pełnych zaworów stalowych.
Źródło:: Combustion Engines; 2013, 52, 2; 94-100
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The effect of SiO2 nanoparticles content in engine oil on tribological properties of valvetrain chain transmission components
Autorzy:: Spinache, Edward
Trandafir, Adrian
Diaconu, Mihai
Ozuna, Gustavo
Wozniak, Marek
Kubiak, Przemyslaw
Siczek, Krzysztof
Powiązania:: https://bibliotekanauki.pl/articles/134029.pdf
Data publikacji:: 2019
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: valvetrain
chain transmission
wear
friction
SiO2 nanoparticles
rozrząd silnika
przekładnia łańcuchowa
zużycie
tarcie
nanocząstki SiO2
Opis:: The drive from the crankshaft to the camshaft in an internal combustion engine is usually carried out by means of a cogged belt transmission or a chain transmission when high millage is required without service operations. The valvetrains in CI engines sometimes use the gear transmissions, and the historical rather bevel gear can be found in old cars of collectors or in some motorcycle engines. The chain gear used in SI engines has a two- or three-row chain with high strength, due the unevenness of loads that additionally induce chain pulling and valve timing deregulation. The chain transmission requires the use of pre-tensioners, usually self-acting and driven by springs or oil pressure. The vibrations and chain runout are limited using plastic guides placed on the outside of the long straight sections of the chain. The model of the chain transmission developed with the use of the Finite Elements Method, which operates under oil lubrication conditions, was analyzed. Such the model allowed obtaining weight and mass inertial moments of components. The aim of the study was to evaluate the effect of SiO2 nanoparticles content in engine oil on the friction between chain transmission components. The resulted values of the friction torque in the chain transmission operating in different conditions of lubrication have been presented in the paper.
Źródło:: Combustion Engines; 2019, 58, 4; 4-12
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "valvetrain" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język