Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "toxic exhaust gas emission" wg kryterium: Temat


Wyświetlanie 1-2 z 2
Tytuł:
Laboratory study on influence of air duct throttling on exhaust gas composition in marine four - stroke diesel engine
Autorzy:
Kowalski, J.
Powiązania:
https://bibliotekanauki.pl/articles/248050.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engine
exhaust gas composition
toxic emission
laboratory investigation
air duct throttling
Opis:
Presented paper shows results of laboratory tests on the relationship between the throttling of a cross area of an air intake duct and the composition of exhaust gas from the marine engine. The object of research is a laboratory four-stroke diesel engine, worked with a load from 50kW to 250kW at a constant speed. During the laboratory, tests over 50 parameters were measured of the engine with technical condition recognized as a “working properly” and with a simulated the air intake duct throttling. The simulation consisted of inserting the throttling flanges to the air intake duct before compressor, limiting duct cross-sectional area by 20% and 60% respectively. The results of laboratory research confirm that the effect of the air intake duct throttling on the engine thermodynamic parameters is clearly visible only at considerable throttling. In the case of measuring the composition of exhaust gas, both mole fractions and emissions of gaseous components markedly affected even at low throttling. For example, 20% throttling of the cross section of the air intake duct increase the mole fraction of carbon monoxide in exhaust gas almost 44% during working the engine with load equal to 250kW, and only 10% of the temperature after air cooler. Keep in mind that the temperature after air cooler was an engine parameter, which undergoes the greatest change during the simulation of that malfunction. The conclusion is that the results of measurements of the composition of exhaust gas may contain valuable diagnostic information about the technical condition of the air delivery to the engine system.
Źródło:
Journal of KONES; 2012, 19, 1; 191-198
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An experimental study of emission and combustion characteristics of marine diesel engine with fuel injector malfunctions
Autorzy:
Kowalski, J.
Powiązania:
https://bibliotekanauki.pl/articles/260092.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
marine diesel engine
exhaust gas composition
toxic emission
laboratory investigation
fuel injector malfunctions
Opis:
The presented paper shows the results of the laboratory study on the relation between chosen malfunctions of a fuel injector and composition of exhaust gas from the marine engine. The object of research is a marine 3-cylinder, four-stroke, direct injection diesel engine with an intercooler system. The engine was loaded with a generator and supercharged. The generator was electrically connected to the water resistance. The engine operated with a load between 50 kW and 250 kW at a constant speed. The engine load and speed, parameters of the turbocharger, systems of cooling, fuelling, lubricating and air exchange, were measured. Fuel injection and combustion pressures in all cylinders of the engine were also recorded. Exhaust gas composition was recorded by using a electrochemical gas analyzer. Air pressure, temperature and humidity were also recorded. Emission characteristics of the engine were calculated according to ISO 8178 standard regulations. During the study the engine operated at the technical condition recognized as „working properly” and with simulated fuel injector malfunctions. Simulation of malfunctions consisted in the increasing and decreasing of fuel injector static opening pressure, decalibration of fuel injector holes and clogging 2 neighboring of 9 fuel injector holes on one of 3 engine cylinders.
Źródło:
Polish Maritime Research; 2016, 1; 77-84
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies