- Tytuł:
- Bending Strength of Composite Materials with EN AC-44200 Matrix Reinforced with Al2O3 Particles
- Autorzy:
-
Kurzawa, J.
Kaczmar, J. W. - Powiązania:
- https://bibliotekanauki.pl/articles/381132.pdf
- Data publikacji:
- 2015
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
composite materials
aluminium oxide particles
bending strength
materiały kompozytowe
tlenek glinu
wytrzymałość na zginanie - Opis:
- There are presented results of a research on bending strength of aluminum alloy EN AC-44200 based composite materials reinforced with aluminum oxide particles. The composite materials were manufactured by squeeze casting with the liquid EN AC-44200 Al alloy of porous ceramic preforms under pressure of 100 MPa. For reinforcing of the EN AC-44200 matrix alloy, preforms made of Al2O3 particles with porosity 60, 70, 80 and 90% were applied. In relation to unreinforced EN AC-44200 base Al alloy, bending strength of composite materials increased about 10% per each 10 vol.% increase of Al2O3 particles in the matrix. The highest bending strength of over 400 MPa was reached by the materials reinforced with 30 and 40 vol.% of Al2O3 particles. Microscopic observations of fracture surfaces confirm that the particles intensively restrict plastic deformation of the alloy, which contributes to creation of a typically brittle fracture. The particles present on the crack propagation path inhibit development of microcracks initiated during bend tests. Most often, the fracture runs through interfacial matrix-particle boundaries, which is caused by brittle bridges of silica binder, present on these boundaries.
- Źródło:
-
Archives of Foundry Engineering; 2015, 15, 1 spec.; 61-64
1897-3310
2299-2944 - Pojawia się w:
- Archives of Foundry Engineering
- Dostawca treści:
- Biblioteka Nauki
Artykuł