- Tytuł:
-
Effect Of SiC Particles On Sinterability Of Al-Zn-Mg-Cu P/M Alloy
Wpływ cząstek SiC na spiekalność proszku stopowego Al-Zn-Mg-Cu - Autorzy:
-
Rudianto, H.
Jang, G. J.
Yang, S. S.
Kim, Y. J.
Dlouhy, I. - Powiązania:
- https://bibliotekanauki.pl/articles/351304.pdf
- Data publikacji:
- 2015
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
metal matrix composites
powder metallurgy
sintering
heat treatment
kompozyty metalowe
metalurgia proszków
spiekanie
obróbka cieplna - Opis:
- Premix Al-5.5Zn-2.5Mg-0.5Cu alloy powder was analyzed as matrix in this research. Gas atomized powder Al-9Si with 20% volume fraction of SiC particles was used as reinforcement and added into the alloy with varied concentration. Mix powders were compacted by dual action press with compaction pressure of 700 MPa. High volume fraction of SiC particles gave lower green density due to resistance of SiC particles to plastic deformation during compaction process and resulted voids between particles and this might reduce sinterability of this mix powder. Sintering was carried out under ultra high purity nitrogen gas from 565°-580°C for 1 hour. High content of premix Al-5.5Zn-2.5Mg-0.5Cu alloy powder gave better sintering density and reached up to 98% relative. Void between particles, oxide layer on aluminum powder and lower wettability between matrix and reinforcement particles lead to uncompleted liquid phase sintering, and resulted on lower sintering density and mechanical properties on powder with high content of SiC particles. Mix powder with wt90% of Alumix 431D and wt10% of Al-9Si-vf20SiC powder gave higher tensile strength compare to another mix powder for 270 MPa. From chemical compositions, sintering precipitates might form after sintering such as MgZn2, CuAl2 and Mg2Si. X-ray diffraction, DSC-TGA, and SEM were used to characterize these materials.
- Źródło:
-
Archives of Metallurgy and Materials; 2015, 60, 2B; 1383-1385
1733-3490 - Pojawia się w:
- Archives of Metallurgy and Materials
- Dostawca treści:
- Biblioteka Nauki
Artykuł