Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "transfer ciepła" wg kryterium: Temat


Tytuł:
Intensification of heat transfer between heat exchange surfaces at low RE values
Autorzy:
Cernecky, J.
Brodnianska, Z.
Koniar, J.
Powiązania:
https://bibliotekanauki.pl/articles/184897.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer
heat exchange surface
Colburn j-factor
interferometry
przenikanie ciepła
powierzchnia wymiany ciepła
interferometria
Opis:
This contribution deals with the heat transfer parameters and pressure losses in heat exchange sets with six geometrical arrangements at low Re values (Re from 476 to 2926). Geometrical arrangements were characterised by the h/H ratio ranging from 0.2 to 1.0. The experiments used the holographic interferometry method in real time. This method enables visible and quantitative evaluations of images of temperature fields in the examined heat exchange. These images are used to determine the local and mean heat transfer parameters. The obtained data were used to determine the Colburn j-factor and the friction coefficient f. The measured values show that by using the profiled heat exchange surfaces and inserting regulating tubes, an intensification of heat transfer (increase of Num, and/or j) was achieved. However, pressure losses recorded a significant increase (increase of f).
Źródło:
Chemical and Process Engineering; 2015, 36, 3; 331-344
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations on heat and momentum transfer in CuO-water nanofluid
Autorzy:
Dzido, G.
Drzazga, M.
Lemanowicz, M.
Gierczycki, A. T.
Powiązania:
https://bibliotekanauki.pl/articles/240561.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanofluids
fluid mechanics
heat transfer
nanopłyny
mechanika płynów
przenikanie ciepła
Opis:
This paper presents results of investigations on the application of CuO-water nanofluids for intensification of convective heat transfer. Performance of nanofluids with 2.2 and 4.0 vol.% CuO NPs (nanoparticles) content were examined with regard to heat transfer coefficient and pressure losses in case of turbulent flow in a tube. Negligible impact of examined nanofluid on heat transfer improvement was found. Moreover, measured pressure losses significantly exceeded those determined for primary base liquid. The observations showed that application of nanofluid for heat transfer intensification with a relatively high solid load in the examined flow range is rather controversial.
Źródło:
Archives of Thermodynamics; 2015, 36, 2; 49-59
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of regulating elements on convective heat transfer along shaped heat exchange surfaces
Autorzy:
Cernecky, J.
Koniar, J.
Brodnianska, Z.
Powiązania:
https://bibliotekanauki.pl/articles/185818.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer
convection
holographic interferometry
przenikanie ciepła
konwekcja
interferometria holograficzna
Opis:
The paper deals with a study of the effect of regulating elements on local values of heat transfer coefficients along shaped heat exchange surfaces with forced air convection. The use of combined methods of heat transfer intensification, i.e. a combination of regulating elements with appropriately shaped heat exchange areas seems to be highly effective. The study focused on the analysis of local values of heat transfer coefficients in indicated cuts, in distances expressed as a ratio x/s for 0; 0.33; 0.66 and 1. As can be seen from our findings, in given conditions the regulating elements can increase the values of local heat transfer coefficients along shaped heat exchange surfaces. An optical method of holographic interferometry was used for the experimental research into temperature fields in the vicinity of heat exchange surfaces. The obtained values correspond very well with those of local heat transfer coefficients [alfa]x, recorded in a CFD simulation.
Źródło:
Chemical and Process Engineering; 2013, 34, 1; 5-16
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of the steam flow field in shell and tube heat exchanger
Autorzy:
Bartoszewicz, J.
Bogusławski, L.
Powiązania:
https://bibliotekanauki.pl/articles/240429.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer
heat exchanger
shell and tube heat exchanger
przenikanie ciepła
wymiennik ciepła
wymiennik płaszczowo-rurowy
Opis:
In the paper, the results of numerical simulations of the steam flow in a shell and tube heat exchanger are presented. The efficiency of different models of turbulence was tested. In numerical calculations the following turbulence models were used: k-ε, RNG k-ε, Wilcox k-ω, Chen-Kim k-ε, and Lam-Bremhorst k-ε. Numerical analysis of the steam flow was carried out assuming that the flow at the inlet section of the heat exchanger were divided into three parts. The angle of steam flow at inlet section was determined individually in order to obtain the best configuration of entry vanes and hence improve the heat exchanger construction. Results of numerical studies were verified experimentally for a real heat exchanger. The modification of the inlet flow direction according to theoretical considerations causes the increase of thermal power of a heat exchanger of about 14%.
Źródło:
Archives of Thermodynamics; 2016, 37, 2; 107-120
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental determination of correlations for mean heat transfer coefficients in plate fin and tube heat exchangers
Autorzy:
Taler, D.
Powiązania:
https://bibliotekanauki.pl/articles/239992.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
model matematyczny
przenikanie ciepła
wymiennik ciepła
heat transfer correlations
mathematical model
tube and plate fin heat exchangers
Opis:
This paper presents a numerical method for determining heat transfer coefficients in cross-flow heat exchangers with extended heat exchange surfaces. Coefficients in the correlations defining heat transfer on the liquid- and air-side were determined using a nonlinear regression method. Correlation coefficients were determined from the condition that the sum of squared liquid and air temperature differences at the heat exchanger outlet, obtained by measurements and those calculated, achieved minimum. Minimum of the sum of the squares was found using the Levenberg-Marquardt method. The uncertainty in estimated parameters was determined using the error propagation rule by Gauss. The outlet temperature of the liquid and air leaving the heat exchanger was calculated using the analytical model of the heat exchanger.
Źródło:
Archives of Thermodynamics; 2012, 33, 3; 3-26
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the Portuguese building stock and its impacts on energy consumption – an average U-value approach
Autorzy:
Sousa, J.
Bragança, L.
Almeida, M.
Silva, P.
Powiązania:
https://bibliotekanauki.pl/articles/231236.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
zasoby budynków
zasoby energii
zużycie energii
element konstrukcyjny
przenikanie ciepła
współczynnik przenikania ciepła
building stock
energy resources
energy consumption
structural element
heat transfer
heat transfer coefficient
Opis:
The article aims to evaluate the Portuguese building stock energy policies and strategy for energy saving in buildings among the EU members. It was found out the average heat transfer coefficients of the main structural elements of Portuguese Buildings and analyzed the U-values of this elements considering different time periods. The fundamentals of this study were funded by the Agency for Development and Innovation (ADI) and co-financed by the European Regional Development Fund (FEDER) through the Operational Program for Competitiveness Factors (POFC) assigned to the Building Physics and Construction Technology Laboratory with the reference SB Tool SPT_2011_4.
Źródło:
Archives of Civil Engineering; 2013, 59, 4; 523-546
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magneto-polar fluid flow through a porous medium of variable permeability in slip flow regime
Autorzy:
Gaur, P. K.
Jha, A. K.
Sharma, R.
Powiązania:
https://bibliotekanauki.pl/articles/266273.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
magnetohydrodynamika
przepuszczalność
przenikanie ciepła
polar fluid
MHD
permeability
slip-flow
heat transfer
Opis:
A theoretical study is carried out to obtain an analytical solution of free convective heat transfer for the flow of a polar fluid through a porous medium with variable permeability bounded by a semi-infinite vertical plate in a slip flow regime. A uniform magnetic field acts perpendicular to the porous surface. The free stream velocity follows an exponentially decreasing small perturbation law. Using the approximate method the expressions for the velocity, microrotation, and temperature are obtained. Further, the results of the skin friction coefficient, the couple stress coefficient and the rate of heat transfer at the wall are presented with various values of fluid properties and flow conditions.
Źródło:
International Journal of Applied Mechanics and Engineering; 2016, 21, 2; 323-339
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Burner Locations in the Heating Furnace on the Charge Temperature Field
Wpływ usytuowania palników w piecu grzewczym na pole temperatury nagrzewanego wsadu do przeróbki plastycznej
Autorzy:
Rywotycki, M.
Szajding, A.
Malinowski, Z.
Telejko, T.
Gołdasz, A.
Beneš, M.
Powiązania:
https://bibliotekanauki.pl/articles/351620.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
industrial furnaces
heat transfer
numerical modelling
piece przemysłowe
przenikanie ciepła
modelowanie numeryczne
Opis:
Charge heating in industrial furnaces is a difficult and complex process. There are many physical phenomena which influence heat transfer. At the charge surface heat transfer takes place by radiation and convection. In order to ensure correct operation of the technological system, it is necessary to achieve the required charge temperature in the whole volume and ensure its uniformity. The influence of selected burner locations inside the furnace on the charge temperature has been analysed. The temperature field and its uniformity in the round charge made of steel for hot open die forging have been analysed. The model and numerical calculations were performed with the ANSYS-Fluent 14.5 package.
Nagrzewanie wsadu w piecach przemysłowych jest trudnym i złożonym procesem. Celem zapewnienia prawidłowej pracy ciągu technologicznego konieczne jest osiągnięcie przez wsad wymaganej temperatury w całej objętości, oraz zapewnienie odpowiedniej równomierności nagrzewania. W pracy określono wpływ sposobu nagrzewania wsadu w piecu komorowym dla wybranych wariantów usytuowania palników grzewczych. Analizie poddano pole temperatury i jego jednorodność w nagrzewanym wsadzie stalowym przeznaczonym do przeróbki plastycznej. Model i obliczenia wykonano pakietem numerycznym ANSYS-Fluent 14.5.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 3A; 1981-1985
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of the Temperature Field within Textile Inlayers of Clothing Laminates
Modelowanie pola temperatury we wkładach włókienniczych laminatów odzieżowych
Autorzy:
Korycki, R.
Szafrańska, H.
Powiązania:
https://bibliotekanauki.pl/articles/232203.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
heat transfer
modelling
inlayer
clothing laminates
przenikanie ciepła
modelowanie
wkłady włókiennicze
laminaty odzieżowe
Opis:
Inlayers are introduced to improve the aesthetic qualities and stiffness against the creasing of clothing laminates. The laminate is created by the thermoplastic polymer glue between the inlayer and clothing material, softened by the heat. The connection is secured by the adhesive properties of the polymer and the pressure applied. The state variable is temperature. The heat transfer is described by the heat transport equation as well as by the set of boundary and intial conditions. The temperature distributions within the inlayers are determined by the numerical simulation for different temperatures of the heating plates. The temperature maps are shown by means of the graphical modulus of the program ADINA. The mean temperature of the polymer layer is next calculated.
Wkłady włókiennicze są stosowane w celu poprawy właściwości estetycznych i wzrostu sztywności zgniatania laminatów odzieżowych. Laminat odzieżowy jest tworzony z wykorzystaniem termoplastycznego kleju polimerowego, umieszczonego między wkładem i materiałem odzieżowym, rozrzedzonego za pomocą ciepła. Połączenie jest utrwalane dzięki właściwościom adhezyjnym polimeru oraz przyłożonemu naciskowi. Zmienna stanu to temperatura. Przepływ ciepła jest opisywany za pomocą równania transportu ciepła oraz układu warunków brzegowych i początkowych. Rozkład temperatury we wkładzie można określić za pomocą symulacji numerycznej dla różnych temperatur płyt grzejnych. Mapy temperatury można poddać wizualizacji za pomocą modułu graficznego programu ADINA. Następnie można określić temperaturę warstwy polimeru.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 4 (100); 118-122
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parametric integral equations systems method in solving unsteady heat transfer problems for laser heated materials
Autorzy:
Sawicki, D.
Zieniuk, E.
Powiązania:
https://bibliotekanauki.pl/articles/386960.pdf
Data publikacji:
2015
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
PIES method
transient heat transfer
laser heating
FEM
metoda PIES
ogrzewanie laserem
wymiana ciepła
przenikanie ciepła
parametryczny układ równań całkowych
Opis:
One of the most popular applications of high power lasers is heating of the surface layer of a material, in order to change its properties. Numerical methods allow an easy and fast way to simulate the heating process inside of the material. The most popular numerical methods FEM and BEM, used to simulate this kind of processes have one fundamental defect, which is the necessity of discretization of the boundary or the domain. An alternative to avoid the mentioned problem are parametric integral equations systems (PIES), which do not require classical discretization of the boundary and the domain while being numerically solved. PIES method was previously used with success to solve steady-state problems, as well as transient heat transfer problems. The purpose of this paper is to test the efficacy of the PIES method with time discretization in solving problem of laser heating of a material, with different pulse shape approximation functions.
Źródło:
Acta Mechanica et Automatica; 2015, 9, 3; 167-172
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modelling of humid air flow around a porous body
Autorzy:
Bohojło-Wiśniewska, A.
Powiązania:
https://bibliotekanauki.pl/articles/386546.pdf
Data publikacji:
2015
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
numerical modelling
heat transfer
air flow
mass transfer
chinese cabbage
kapusta pekińska
modelowanie numeryczne
powietrze wilgotne
przepływ powietrza
przenikanie ciepła
warzywa
Opis:
This paper presents an example of humid air flow around a single head of Chinese cabbage under conditions of complex heat transfer. This kind of numerical simulation allows us to create a heat and humidity transfer model between the Chinese cabbage and the flowing humid air. The calculations utilize the heat transfer model in porous medium, which includes the temperature difference between the solid (vegetable tissue) and fluid (air) phases of the porous medium. Modelling and calculations were performed in ANSYS Fluent 14.5 software.
Źródło:
Acta Mechanica et Automatica; 2015, 9, 3; 161-166
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigation on the effects of obstruction and side ratio on non-Newtonian fluid flow behavior around a rectangular barrier
Autorzy:
Noferesti, Sara
Ghassemi, Hassan
Nowruzi, Hashem
Powiązania:
https://bibliotekanauki.pl/articles/122461.pdf
Data publikacji:
2019
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
non-Newtonian fluids
heat transfer
finite volume method
laminar flow
płyn nieniutonowski
przenikanie ciepła
wymiana ciepła
metoda objętości skończonej
przepływ laminarny
Opis:
In this paper, the characteristics of the flow and forced heat transfer of power law non-Newtonian fluids that flow around a quadrilateral and rectangular cylinder that are located in a 2D channel are investigated by use of the finite volume method (FVM) in a steady state flow regime. To this accomplishment, in the constant temperature, the effects of a different obstruction ratio, aspect ratio and Reynolds number are investigated. The Reynolds number in the range 5 ≤ Re ≤ 40, the power index in the range 0.5 ≤ n ≤ 1.4, the aspect ratio in the range 0.5 ≤ a ≤ 2, and the obstruction ratio in the range 0.125 ≤ b ≤ 0.5 were selected. By surveying the drag coefficient profiles, it’s concluded that as the obstruction ratio increases, the drag coefficient is increased, while an increase in the Reynolds number causes the lower drag coefficient. In addition, the drag coefficient is strongly increased by aspect ratio enhancements.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2019, 18, 1; 53-67
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD Analysis of Heat Transfer in a Microtubular Solid Oxide Fuel Cell Stack
Autorzy:
Pianko-Oprych, P.
Kasilova, E.
Jaworski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/185553.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
przenikanie ciepła
strata ciepła
rozkład temperatur
microtubular Solid Oxide Fuel Cell stack
heat transfer
heat losses
temperature distributions
computational fluid dynamics (CFD)
Opis:
The aim of this work was to achieve a deeper understanding of the heat transfer in a microtubular Solid Oxide Fuel Cell (mSOFC) stack based on the results obtained by means of a Computational Fluid Dynamics tool. Stack performance predictions were based on simulations for a 16 anodesupported mSOFCs sub-stack, which was a component of the overall stack containing 64 fuel cells. The emphasis of the paper was put on steadystate modelling, which enabled identification of heat transfer between the fuel cells and air flow cooling the stack and estimation of the influence of stack heat losses. Analysis of processes for different heat losses and the impact of the mSOFC reaction heat flux profile on the temperature distribution in the mSOFC stack were carried out. Both radiative and convective heat transfer were taken into account in the analysis. Two different levels of the inlet air velocity and three different values of the heat losses were considered. Good agreement of the CFD model results with experimental data allowed to predict the operation trends, which will be a reliable tool for optimisation of the working setup and ensure sufficient cooling of the mSOFC stack.
Źródło:
Chemical and Process Engineering; 2014, 35, 3; 293-304
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ ożebrowania rury na warunki wymiany ciepła przy konwekcji swobodnej w powietrzu
The influence of fins on heat transfer performance under free convection in air
Autorzy:
Tychanicz-Kwiecień, Maria
Mazur, Aleksandra
Gil, Paweł
Gałek, Rafał
Powiązania:
https://bibliotekanauki.pl/articles/195178.pdf
Data publikacji:
2019
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
powierzchnie ożebrowane
przenikanie ciepła
konwekcja swobodna
moc cieplna
fins
heat transfer
free convection
thermal power
Opis:
Artykuł przedstawia wstępne wyniki pomiarów cieplnych rurowego wymiennika ciepła typu woda–powietrze, wykonanego z odcinków rur gładkich oraz ożebrowanych z żebrami śrubowymi. Stanowisko pomiarowe znajduje się na wyposażeniu Zakładu Termodynamiki Wydziału Budowy Maszyn i Lotnictwa Politechniki Rzeszowskiej. Dokonano pomiarów mocy cieplnej traconej przez przenikanie na rurze gładkiej oraz ożebrowanej w funkcji różnicy temperatury wody wlotowej i temperatury otoczenia oraz współczynników przenikania ciepła: rury gładkiej – odniesionego do powierzchni zewnętrznej oraz dla rury ożebrowanej – odniesionego do powierzchni całkowitej ożebrowania. Wyniki pomiarów wskazują, że moc cieplna rozpraszana do otoczenia wzrasta niemal trzykrotnie w wyniku zastosowania ożebrowania w stosunku do powierzchni gładkiej. Z kolei współczynnik przenikania ciepła określony dla rury gładkiej osiągnął wartość wielokrotnie większą niż dla rury ożebrowanej.
The article presents preliminary results of thermal parameter measurements of an air-water tubular heat exchanger made of smooth- and finned pipes. The experimental set-up is the equipment of The Department of Thermodynamics at Rzeszow University of Technology. The following parameters have been measured as a function of temperature difference between inlet water temperature and ambient temperature: dissipated thermal power for smooth- and finned pipes and the heat transfer coefficient for a smooth pipe related to the external surface and heat transfer coefficient for a finned pipe related to the overall finned surface. The results indicate that dissipated thermal power increased almost three times for the finned pipe with regard to the smooth pipe. The heat transfer coefficient obtained for a smooth pipe was considerably greater than for a finned pipe.
Źródło:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika; 2019, z. 91 [299], 1-2; 93-107
0209-2689
2300-5211
Pojawia się w:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ ramki dystansowej na rozkład temperatury na powierzchni szyby zespolonej w świetle badań termowizyjnych
Influence of the spacer frame on temperature distribution on surface of glazing in the light of thermovision tests
Autorzy:
Lichołai, L.
Starakiewicz, A.
Murias, P.
Szyszka, J.
Powiązania:
https://bibliotekanauki.pl/articles/362740.pdf
Data publikacji:
2015
Wydawca:
Instytut Fizyki Budowli Katarzyna i Piotr Klemm
Tematy:
przegrody przezroczyste
ramka dystansowa
przenikanie ciepła
badania termowizyjne
transparent barriers
spacer frame
heat transfer
thermovision research
Opis:
Przegrody przezroczyste są integralną częścią budynku. Ich rodzaj i jakość wpływa na wewnętrzny komfort użytkowy, a także na bilans cieplny całego obiektu. Poszczególne elementy zestawów szybowych mają znaczenie dla ogólnej charakterystyki termicznej konkretnego rozwiązania okiennego. W niniejszej pracy zamieszczono wyniki badań termowizyjnych różnorodnych zespoleń szybowych. Analizie poddano wpływ zastosowanych ramek dystansowych na rozkład temperatury powierzchni szyby w okolicach jej obrzeża, a w konsekwencji na wartość współczynnika przenikania ciepła szyby Ug.
Transparent barriers are an integral part of the building. Their kind and quality has impact on usable interior comfort, and also on the heat balance of the whole object. The individual elements of the glass sets are important for the general thermal characteristic of each window. The paper presents the results of thermovision tests of different kinds of windows. The influence of used distance frames on the temperature distribution on the glass surface near its periphery, and consequently the value of heat transfer coefficient Ug of the glazing was analyzed.
Źródło:
Fizyka Budowli w Teorii i Praktyce; 2015, T. 7, nr 1, 1; 45-48
1734-4891
Pojawia się w:
Fizyka Budowli w Teorii i Praktyce
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies