Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "system stability" wg kryterium: Temat


Tytuł:
Wykorzystanie urządzeń DA-BOX 2000 do monitorowania stabilności sieci elektroenergetycznej
Use of DA-BOX 2000 devices for monitoring power system stability
Autorzy:
Małyszko, O.
Wiśniewski, R.
Zeńczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/268884.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
system elektroenergetyczny
stabilność systemu
oscylacje niskoczęstotliwościowe
DA-Box 2000
power system
system stability
low frequency oscillation
Opis:
W artykule omówiono zagadnienia związane ze stabilnością sieci elektroenergetycznej, przeznaczenie i zasadę działania urządzenia DA-Box 2000 oraz wykorzystanie go do monitorowania stabilności sieci elektroenergetycznych. Doświadczenia niemieckie wskazują, że badanie stabilności sieci ma coraz większe znaczenie w praktyce z powodu gwałtownego wzrostu udziału nieliniowych źródeł i odbiorów energii w systemie elektroenergetycznym. Przyrząd DA-Box 2000, poprzez zaawanasowaną analizę napięć i częstotliwości, jest w stanie wykryć groźbę utraty stabilności przez system elektroenergetyczny spowodowany na przykład lawiną napięcia lub częstotliwości. Według danych producenta urządzenia te pracują z powodzeniem w kilkunastu krajach na całym świecie.
The power system is a complex system in which, except the usual linear elements, there are more and more nonlinear and restless power generating and loading devices. This causes that even in the normal working conditions, besides the basic harmonic (50 Hz) of current and voltage there are more and more higher harmonics and subharmonic. Higher harmonic content generally refers to the quality of energy, while subharmonic, especially low frequency oscillations of several Hz or even less than 1 Hz, can be used for power system stability testing. Unfortunately, so far they are basically not used either in the power system protection or in the power system control. This paper presents issues related to the stability of the power grid, the purpose and principle of operation of the DABox 2000 and its use to monitor the stability of the power grid. German experience indicates that the study of network stability is becoming increasingly important in practice due to the rapid increase in the share of nonlinear sources and energy load in the power system. The DA-Box 2000 device, using its advanced voltage and frequency analysis, is able to detect the threat of power system failure due to, for example, a collapse of voltage or frequency. According to the manufacturer's data, these devices work successfully in over a dozen countries around the world.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2017, 56; 57-62
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Investments in Generating Units and Transmission and Distribution Power Grids by 2025 on Voltage Stability and Branches Load in ENERGA SA Operational Territory – Main Findings of Research Project
Wpływ inwestycji do 2025 roku w moce wytwórcze oraz sieć przesyłową i dystrybucyjną na obciążalność węzłów i przeciążalność prądową linii znajdujących się na obszarze działania spółki ENERGA SA – najważniejsze wnioski z projektu badawczego
Autorzy:
Falkowski, D.
Zarzycki, M.
Powiązania:
https://bibliotekanauki.pl/articles/397074.pdf
Data publikacji:
2013
Wydawca:
ENERGA
Tematy:
power system
voltage stability
system elektroenergetyczny
stabilność napięciowa
Opis:
The article summarizes a research project which was conducted in order to ensure what will be the influence of future investments and changes in the Polish Power System on the stability and functionality of the ENERGA SA distribution grid system. Development of the ENERGA SA distribution grid system was also included. Only stable states were tested for various cases of system load and generation in power plants (the Nuclear Power Plant in Żarnowiec was taken into account) and also in wind farms. The system was also tested in N-1 and N-2 states. The result of this study is an overall evaluation of the ENERGA SA distribution grid condition, as well as the identification of potential weak points inside this structure.
Autorzy podsumowują projekt badawczy, zrealizowany jeszcze w trakcie studiów magisterskich, który miał na celu sprawdzenie, jak zmiany w systemie elektroenergetycznym do 2025 roku wpłyną na pracę sieci dystrybucyjnej 110 kV ENERGA SA. W projekcie skupiono się na stanach ustalonych pracy KSE dla różnych wariantów obciążenia systemu i generacji w jednostkach wytwórczych. System poddano analizie prace w stanach normalnych oraz awaryjnych przy przy wyłączeniu elementów KSE, tzw. analiza N-1 i N-2. Wynikiem opracowania była ogólna ocena przystosowania sieci dystrybucyjnej spółki ENERGA SA do pracy przy zmieniającej się strukturze KSE, jak również wskazanie potencjalnych najsłabszych punktów w strukturze zasilania sieci dystrybucyjnej.
Źródło:
Acta Energetica; 2013, 1; 4-17
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Static stability analysis of power systems
Autorzy:
Konoval, V.
Prytula, R.
Skrypnyk, O.
Powiązania:
https://bibliotekanauki.pl/articles/376128.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
static stability
power system
modal analysis
Opis:
The developed modal method for analyzing oscillating static stability of power systems is based on eigenvalues and eigenvectors. As a mathematical model to the study we use a system of linearized differential equations that describe the behaviour of synchronous machines and their excitation systems during minor disturbances. This approach allows us to analyse the static stability of large power systems, evaluate stability margins, degree of damping modes, and set adjustment mechanism for mode parameters to improve mode stability. We investigated the impact of generator excitation system replacement on stability of Ukraine’s power system. The suggested modal analysis is implemented in the DAKAR software suite [1].
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2015, 82; 11-19
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena stabilności kątowej systemu elektroenergetycznego na podstawie analizy wybranych stanów zakłóceniowych
Assesment of the power system angular stability based on analysis of selected disturbance states
Autorzy:
Paszek, S.
Pruski, P.
Powiązania:
https://bibliotekanauki.pl/articles/397310.pdf
Data publikacji:
2011
Wydawca:
ENERGA
Tematy:
system elektroenergetyczny
stabilność kątowa
zakłócenia
power system
angular stability
noise
Opis:
W artykule przedstawiono metodę oceny stabilności kątowej wielomaszynowego systemu elektroenergetycznego, na podstawie analizy wybranych stanów zakłóceniowych. Do oceny stabilności kątowej wykorzystano elektromechaniczne wartości własne, obliczone na podstawie przebiegów zakłóceniowych mocy chwilowej w poszczególnych zespołach wytwórczych, po wystąpieniu zakłócenia w postaci prostokątnego impulsu o określonej długości, wprowadzonego do układu regulacji napięcia jednego z zespołów wytwórczych. Przeanalizowano wpływ czasu trwania impulsu na dokładność obliczeń wartości własnych oraz na amplitudę kołysań mocy chwilowej. Analizę przeprowadzono dla różnych wartości współczynników wzmocnienia stabilizatorów systemowych w poszczególnych zespołach wytwórczych, czemu odpowiada różne tłumienie kołysań mocy chwilowej w systemie elektroenergetycznym. Wartości własne zostały obliczone przy użyciu algorytmu hybrydowego, stanowiącego połączenie algorytmów genetycznego i gradientowego. Dla wybranych przypadków przeprowadzono analizę statystyczną dokładności obliczeń elektromechanicznych wartości własnych.
This paper presents the method for assessing the angular stability of a multi-machine electrical power system based on the analysis of selected disturbance states. For the assessment of the angular stability there were used the electromechanical eigenvalues calculated from the instantaneous power disturbance waveforms in particular generating units after the occurrence of a disturbance in the form of a square pulse with a determined length, introduced into the voltage regulation system of one of the generating units. The influence of the pulse duration time on the accuracy of eigenvalue calculations and the amplitude of instantaneous power swings is analysed in the paper. The analysis was performed for various values of the system stabilizer gain coefficients in particular generating units, which corresponded to different damping of instantaneous power swings in the power system. The eigenvalues were calculated with a hybrid algorithm, which combined a genetic algorithm with a gradient algorithm. A statistical analysis of the accuracy of electromechanical eigenvalue calculations was performed for selected cases.
Źródło:
Acta Energetica; 2011, 2; 45-52
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości oceny bieżącego stanu stabilności SEE. Pochodne zamiast charakterystyk
The possibilities of assessing the current ESP stability derivatives instead of characteristics
Autorzy:
Oziembiewski, K.
Opala, K.
Powiązania:
https://bibliotekanauki.pl/articles/397318.pdf
Data publikacji:
2011
Wydawca:
ENERGA
Tematy:
system elektroenergetyczny
stabilność
przesył mocy
power system
stability
power transmission
Opis:
Rozwiązywanie zadań optymalizacji rozpływów Mocy opiera się na badaniu przebiegu krzywych strat Sieciowych w funkcji parametrów pracy systemu. Rozwiązywanie Określonej grupy zadań z zakresu stabilności Systemu opiera się na badaniu krzywych (charakterystyk) Przesyłu mocy czynnej i biernej w funkcji tych samych parametrów Pracy systemu. Moce węzłów i straty sieciowe To te same kategorie fizyczne; łącznie tworzą bilans mocy Systemu. W artykule staramy się wykazać, że metody I narzędzia do badania przebiegu krzywych strat i charakterystyk Przesyłu mocy mogą być zbliżone.
A solution of problems concerning optimisation of power distributions consists in investigating the curves of grid losses as the function of system operating parameters. The solution of a specific group of problems in system stability consists in investigating the curves (characteristics) of active and reactive power transmissions as the function of the same system operating parameters. The node powers and the power losses are equal physical categories; in total, they form the power balance of a system. The authors of this paper attempt to demonstrate that the methods and tools for testing the courses of loss curves and power transmission characteristics can be approximated.
Źródło:
Acta Energetica; 2011, 2; 33-42
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Power system participation factors for real and complex eigenvalues cases
Autorzy:
Konoval, V.
Prytula, R.
Powiązania:
https://bibliotekanauki.pl/articles/376120.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
modal analysis
participation factor
static stability
power system
Opis:
This paper provides a brief overview on existing approaches for defining participation factor in modal analysis. We calculated participation factors using different approximations and specific examples, and then compared the obtained results with equations derived from the mode evolution. As a result, the existing methods for determining a state variable participation factor in mode are proved incorrect result for complex eigenvalue case. Modem software applications designed to analyze power system stability deploy old approaches that provide incorrect results of modal analysis and pose risks to the operation of real power systems. To solve this problem we presented a new broadened definition of participation factor that assures correct results for real and complex eigenvalues cases. We used a two-mass mechanics system to validate proposed approach and our findings confirm the proposed participation factor theory.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2017, 90; 369-381
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Participation factor in modal analysis of power systems stability
Autorzy:
Konoval, V.
Prytula, R.
Powiązania:
https://bibliotekanauki.pl/articles/376278.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
modal analysis
participation factor
static stability
power system
Opis:
This paper provides a brief overview on existing approaches for defining participation factor in modal analysis which characterizes the interaction between modes and state variables of power system. We calculated participation factors using different methods and compared the results obtained with the expressions derived from mode evolution. For cases of complex eigenvalues of linear differential equations characteristic matrix it was discovered incorrect existing approaches for defining participation factor of state variable in mode. Modern software applications designed to analyze power system stability widely deploy the approaches discussed that provide incorrect results of modal analysis and pose risks to the operation of real power systems. Therefore the problem of calculating the participation factor remains as important as ever.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2016, 86; 97-104
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-criteria optimization of the parameters of PSS3B system stabilizers operating in an extended power system with the use of a genetic algorithm
Autorzy:
Nocoń, Adrian
Paszek, Stefan
Pruski, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2134887.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
power system
power system stabilizers
polyoptimization
transient states
electromechanical swings
angular stability
Opis:
In the paper, the application of multi-criteria optimization of the parameters of PSS3B system stabilizers to damping electromechanical swings in an extended power system (PS) is presented. The calculations of the power system stabilizer (PSS) parameters were divided into two stages. In the first stage, single-machine systems, generating unit - infinite bus, of generating units critical for the angular stability of the PS were analyzed. Time constants and preliminary values of the PSS gains were calculated. In the second stage, the main one, the main gains on which the effectiveness of operation of PSSs depends the most were calculated by multi-criteria optimization of the extended PS. The calculations were carried out in several variants: for two-dimensional objective functions and the six-dimensional objective function. In multi-criteria optimization, the solution is not one set of PSS parameters, but a set of sets of these parameters, i.e. a set of compromises that were determined for each analyzed case. Additionally, for the six-dimensional compromise set, projections of this set on the planes connected with the quantities of individual generating units and the boundary of these projections on these planes were determined. A genetic algorithm adapted to multi-criteria issues was used to minimize the multivariate objective function. Sample calculations were made for the model of the National (Polish) Power System taking into account 57 selected generating units operating in high and extra high voltage networks (220 and 400 kV). The presented calculations show that the applied multi-criteria optimization of the PSS3B stabilizer parameters allows effectively damping electromechanical swings without worsening the voltage waveforms of generating units in the extended PS.
Źródło:
Archives of Control Sciences; 2022, 32, 2; 233--255
1230-2384
Pojawia się w:
Archives of Control Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Location of generating units most affecting the angular stability of the power system based on the analysis of instantaneous power waveforms
Autorzy:
Pruski, Piotr
Paszek, Stefan
Powiązania:
https://bibliotekanauki.pl/articles/229521.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
power system
modal analysis
electromechanical eigenvalues
transient states
angular stability
Opis:
In the paper, the results of investigations on the location of generating units most affecting the angular stability of a large power system (PS) are presented. For their location, the eigenvalues of the PS model state matrix associated with electromechanical phenomena (electromechanical eigenvalues) were used. The eigenvalues were calculated on the basis of the analysis of the disturbance waveforms of instantaneous power of the generating units operating in the PS. The used method of calculating eigenvalues consists in approximation of the disturbance waveforms of generating units by the waveforms being the superposition of modal components. The parameters of these components depend on the sought eigenvalues and their participation factors. The objective function was defined as the mean square error between the approximated and approximating waveforms. To minimize it, a hybrid algorithm, being a combination of genetic and gradient algorithms, was used. In the instantaneous power waveforms of generating units most affecting the PS angular stability, the least damped or undamped modal components dominate. They are related to eigenvalues with the largest values of real parts. The impact of individual modal components on the disturbance waveforms of subsequent generating units was determined with the use of participation factors and correlation coefficients of electromechanical eigenvalues.
Źródło:
Archives of Control Sciences; 2020, 30, 2; 273-293
1230-2384
Pojawia się w:
Archives of Control Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Way of Modelling New Generation Sources and its Effect on Power System Stability Evaluation Parameters
Analiza wpływu sposobu modelowania nowych źródeł wytwórczych na wskaźniki oceny stabilności systemu elektroenergetycznego
Autorzy:
Miller, P.
Wancerz, M.
Powiązania:
https://bibliotekanauki.pl/articles/397302.pdf
Data publikacji:
2013
Wydawca:
ENERGA
Tematy:
power system
stability
network planning
short circuit power
system elektroenergetyczny
stabilność
planowanie rozwoju sieci
Opis:
The effect of the method and accuracy of modelling automatic control systems of generating units on parameters of the power system stability evaluation has been investigated. The evaluation parameters are the following: values of the critical short-circuit time tkr, and corresponding to them values of the stability margin kt,, and the regulation times t50% and t15%. The obtained results make an attempt at establishing the effect of the way generating units are modelled on the conclusions following from the power system stability analyses.
Autorzy przedstawili badanie wpływu sposobu i dokładności modelowania układów automatycznej regulacji nowych bloków wytwórczych na wskaźniki oceny stabilności systemu elektroenergetycznego. Wskaźnikami oceny są czasy krytyczne trwania zwarcia tkr, odpowiadające im współczynniki zapasu stabilności kt, czasy połowienia t50% oraz czasy regulacji t15%. Zaprezentowane wyniki badań są próbą rozstrzygnięcia, jaki wpływ na wnioski wynikające z analiz stabilności ma sposób modelowania bloków wytwórczych.
Źródło:
Acta Energetica; 2013, 4; 101-117
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wpływu sposobu modelowania nowych źródeł wytwórczych na wskaźniki oceny stabilności systemu elektroenergetycznego
The way of modeling new generation sources and its effect on the power system stability evaluation parameters
Autorzy:
Miller, P.
Wancerz, M.
Powiązania:
https://bibliotekanauki.pl/articles/267663.pdf
Data publikacji:
2013
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
system elektroenergetyczny
stabilność
planowanie rozwoju sieci
power system
stability
network planning
short-circuit power
Opis:
W artykule zbadano wpływ sposobu i dokładności modelowania układów automatycznej regulacji nowych bloków wytwórczych na wskaźniki oceny stabilności systemu elektroenergetycznego. Wskaźnikami oceny są czasy krytyczne trwania zwarcia tkr oraz odpowiadające im współczynniki zapasu stabilności kt, czasy połowienia t50% oraz czasy regulacji t15%.
An effect of the way and accuracy of modeling automatic control systems of generating units on parameters of the power system stability evaluation has been investigated. The evaluation parameters are the following: values of the critical shortcircuit time tkr, and corresponding to them values of the stability margin kt,, and the regulation times t50% and t15%. The obtained results make an attempt to establishing the effect of the way generating units are modeled on the conclusions following from the power system stability analyses.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2013, 32; 59-62
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of transient stability by means of a series braking resistor
Poprawa stabilności kątowej przejściowej poprzez załączanie szeregowego rezystora hamującego
Autorzy:
Robak, S.
Gryszpanowicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/396926.pdf
Data publikacji:
2017
Wydawca:
ENERGA
Tematy:
power system
transient stability
series braking resistor
system elektroenergetyczny
stabilność kątowa przejściowa
szeregowy rezystor hamujący
Opis:
The article discusses the use of a series braking resistor to improve the transient stability of a power system. In the case under consideration, a series braking resistor is used to keep the synchronism of synchronous generators after a three-phase short-circuit in a transmission line nearby of power plant. Braking resistors have recently been increasingly used in power engineering. This focus of this paper is on how the resistor is incorporated into the generator unit and on the generator braking intensity during a fault. Theoretical considerations were confirmed by simulation tests in a test system.
Artykuł dotyczy zastosowania szeregowego rezystora hamującego do poprawy stabilności kątowej przejściowej systemu elektroenergetycznego. W rozpatrywanym przypadku szeregowy rezystor hamujący wykorzystywany jest do ratowania synchronizmu generatorów synchronicznych po wystąpieniu bliskiego elektrowni 3-fazowego zwarcia w linii przesyłowej. W ostatnim okresie można zauważyć wzrost zastosowań rezystorów hamujących w elektroenergetyce. W tym artykule uwaga została skupiona na sposobie włączenia rezystora w układ blokowy generatora oraz na intensywności hamowania generatora w trakcie trwania zwarcia. Rozważania teoretyczne potwierdzono za pomocą badań symulacyjnych dla systemu testowego.
Źródło:
Acta Energetica; 2017, 4; 111-115
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of electromechanical eigenvalues based on analysis of different disturbance waveforms of a power system
Autorzy:
Pruski, P.
Paszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/97708.pdf
Data publikacji:
2014
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
power system
eigenvalues associated with electromechanical phenomena
transient states
angular stability
Opis:
The paper presents the calculation results of the power system state matrix eigenvalues associated with electromechanical phenomena (i.e. electromechanical eigenvalues). There is compared the accuracy of eigenvalue calculations performed on the basis of the analysis of disturbance waveforms of instantaneous power, angular speed and power angle of generators of particular generating units of the power system. The method used for eigenvalue calculations consists in approximation of the disturbance waveforms of generating units with waveforms being a superposition of modal components whose parameters depend on the searched eigenvalues and their participation factors. A hybrid optimisation algorithm, being a serial combination of genetic and gradient algorithms, is used for minimisation of the objective function defined as a mean square error between the approximated and approximating waveforms. In order to increase the calculation accuracy, computations were repeated many times. The computation results were averaged.
Źródło:
Computer Applications in Electrical Engineering; 2014, 12; 130-143
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation of system state matrix eigenvalues based on analysis of instantaneous power waveforms at short-circuit disturbances
Obliczenia wartości własnych macierzy stanu systemu na podstawie analizy przebiegów mocy chwilowej przy zakłóceniach zwarciowych
Autorzy:
Pruski, P.
Paszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/397175.pdf
Data publikacji:
2017
Wydawca:
ENERGA
Tematy:
power system
angular stability
electromechanical eigenvalues
transient states
system elektroenergetyczny
stabilność kątowa
elektromechaniczne wartości własne
stany nieustalone
Opis:
W artykule przedstawiono wyniki obliczeń wartości własnych (związanych ze zjawiskami elektromechanicznymi) macierzy stanu modelu systemu elektroenergetycznego (SEE) na podstawie analizy przebiegów zakłóceniowych mocy chwilowej zespołów wytwórczych SEE. Analizowano zakłócenia w postaci zwarcia małoprądowego w różnych liniach przesyłowych SEE. Wykorzystana metoda obliczeń wartości własnych polega na aproksymacji analizowanych przebiegów zakłóceniowych za pomocą przebiegów będących superpozycją składowych modalnych związanych z poszukiwanymi wartościami własnymi. Aproksymacja ta polega na minimalizacji funkcji celu określonej jako błąd średniokwadratowy, występujący między przebiegiem aproksymowanym i aproksymującym. Do minimalizacji funkcji celu wykorzystano hybrydowy algorytm optymalizacyjny, stanowiący szeregowe połączenie algorytmu genetycznego i gradientowego. Połączenie to eliminuje podstawowe wady obu algorytmów. Aby uniknąć błędów obliczeń spowodowanych utknięciem algorytmu w minimum lokalnym funkcji celu, obliczenia wartości własnych dla każdego przebiegu przeprowadzano wielokrotnie.
The paper presents the results of calculations of the eigenvalues (associated with electromechanical phenomena) of the state matrix of a power system (PS) model, based on analysis of the disturbance waveforms of instantaneous power of PS generating units. There were taken into account disturbances in the form of a low-current short circuit in various PS transmission lines. The eigenvalue calculation method used in the investigations consists in the approximation of the analysed disturbance waveforms with waveforms being a superposition of modal components associated with the searched eigenvalues. This approximation consist in the minimisation of the objective function defined as the mean square error that occurs between the approximated and approximating waveform. For the objective function minimisation, a hybrid optimisation algorithm being a serial connection of the genetic and gradient algorithms was used. This connection eliminates the basic disadvantages of these both algorithms. To avoid calculation errors caused by the algorithm getting stuck in the objective function local minimum, the eigenvalues were calculated repeatedly for each waveform.
Źródło:
Acta Energetica; 2017, 2; 177-183
2300-3022
Pojawia się w:
Acta Energetica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Określenie stabilności kątowej systemu elektroenergetycznego na podstawie przebiegów mocy chwilowej przy zakłóceniach zwarciowych
Assesment of power system angular stability based on instantaneous power waveforms at short-circuit disturbances
Autorzy:
Pruski, P.
Paszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/268970.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
power system
angular stability
electromechanical eigenvalues
transient states
system elektroenergetyczny
stabilność kątowa
elektromechaniczne wartości własne
stany nieustalone
Opis:
W artykule przedstawiono wyniki obliczeń elektromechanicznych wartości własnych (związanych ze zjawiskami elektromechanicznymi) macierzy stanu systemu elektroenergetycznego (SEE) uzyskiwanych na podstawie analizy przebiegów nieustalonych mocy chwilowej zespołów wytwórczych. Analizowano zakłócenia w postaci krótkotrwałego zwarcia małoprądowego w różnych liniach przesyłowych SEE. Wykorzystana metoda obliczeń wartości własnych polega na aproksymacji analizowanych przebiegów mocy chwilowej za pomocą przebiegów będących superpozycją składowych modalnych związanych z poszukiwanymi wartościami własnymi. Aproksymację tę sprowadzono do minimalizacji funkcji celu określonej jako błąd średniokwadratowy, występujący między przebiegiem aproksymowanym i aproksymującym. Uzyskano zadowalającą dokładność obliczeń wszystkich elektromechanicznych wartości własnych.
The paper presents the results of calculations of the electromechanical eigenvalues (associated with electromechanical phenomena) of the power system (PS) state matrix based on analysis of the instantaneous power transient waveforms of the PS generating units. There were analysed the disturbances in the form of a symmetrical low-current short-circuit in different PS transmission lines. In the PS model used there was taken into account influence of a central frequency regulator. The method for eigenvalue calculations used in the paper consists in approximation of the analysed instantaneous power waveforms with the waveforms being a superposition of modal components associated with the searched eigenvalues. The approximation consists in minimisation of the objective function defined as the mean square error that occurs between the approximated and approximating waveforms. For the minimisation of the so-defined objective function a hybrid optimisation algorithm being a serial connection of the genetic and gradient algorithms was used. This connection eliminates the basic drawbacks of those both algorithms. To avoid calculation errors occurring when the optimisation algorithm gets stuck in the objective function local minimum, calculations of the eigenvalues for each disturbance waveform were performed repeatedly. The calculation results with the objective function values larger than a certain assumed limit were rejected. The arithmetic means of the not rejected results were assumed to be the final calculation results of the real and imaginary parts of particular eigenvalues.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2017, 53; 95-98
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies