Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "fatigue resistance" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Characteristics of Non-Ferrous Metal Alloys as Determined by Low-Cycle Fatigue Test under Variable Loads
Autorzy:
Maj, M.
Pietrzak, K.
Powiązania:
https://bibliotekanauki.pl/articles/379695.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fatigue resistance
low-cycle fatigue
material constants
odporność na zmęczenie
zmęczenie niskocyklowe
stałe materiałowe
Opis:
The paper presents the results of comparative tests of the fatigue properties conducted on two non-ferrous alloys designated as Al 6082 and Al 7075 which, due to the satisfactory functional characteristics, are widely used as engineering materials. The fatigue tests were carried out using a proprietary, modified low cycle test (MLCF). Particular attention was paid to the fatigue strength exponent b and fatigue ductility exponent c. Based on the tests carried out, the results comprised within the range defined by the literature were obtained. These results prove a satisfactory sensitivity of the method applied, its efficiency, the possibility of conducting tests in a fully economical way and above all the reliability of the obtained results of the measurements. Thus, the thesis has been justified that the modified low cycle fatigue test (MLCF) can be recommended as a tool used in the development of alloy characteristics within the range of low-cycle variable loads.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1; 71-74
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safe choice of structural steels in a region of ultra-high number of load cycles
Autorzy:
Nový, František
Bokůvka, Otakar
Trško, Libor
Jambor, Michal
Powiązania:
https://bibliotekanauki.pl/articles/112057.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
structural steels
fatigue resistance
ultra high cycle fatigue
stal konstrukcyjna
odporność na zmęczenie
wytrzymałość zmęczeniowa
Opis:
In this paper the authors introduce their own selected experimental results in the field of the investigation of fatigue resistance of structural steels. The experiments were carried out on the nine structural steels including high strength steels, DOMEX 700MC, HARDOX 400, HARDOX 450, 100Cr6 (UTS from 446 MPa to 2462 MPa) at high-frequency cyclic loading (f = 20 kHz, T = 20 ± 5 °C, R = -1) in the region of number cycles ranged from N ≈ 2×106 to N ≈ 2×106 cycles of loading. The continuous decrease of fatigue strength in dependence on the number of loading cycles was observed with the average value of ratio σa2x109/ σa2x10 6 = 0.69.
Źródło:
Production Engineering Archives; 2019, 24; 25-28
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safety of construction components in a very high number of load cycles
Autorzy:
Nový, František
Belan, Juraj
Bokůvka, Otakar
Powiązania:
https://bibliotekanauki.pl/articles/88657.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
high-strength materials
fatigue resistance
push-pull loading
high-frequency
S-N curves
wytrzymałość materiałów
wytrzymałość zmęczeniowa
odporność na zmęczenie
wysoka częstotliwość
krzywa S-N
Opis:
Progressive, high-strength materials have an important position in the transport industry. In this industry, components are subject to high safety and reliability requirements because they often operate under long-term cyclic stress regimes. The paper presents results of fatigue resistance of high-strength materials such DOMEX 700MC, HARDOX 400, HARDOX 450, and INCONEL 718 (UTS from 850 to 1560 MPa) measured at high-frequency cyclic loading (f = 20 kHz, T = 20 ± 5 ° C, push-pull loading, cycle asymmetry parameter of R = -1) in the area from N = 2x106 to N = 2x108 cycles. Fatigue resistance showed a continuous decrease about average value Sa2x108/Sa2x106 = 19.1%.
Źródło:
System Safety : Human - Technical Facility - Environment; 2020, 2, 1; 199-206
2657-5450
Pojawia się w:
System Safety : Human - Technical Facility - Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies