Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zhang, Y.D." wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Experimental study and numerical simulation on fly ash separation with different plate voltages in rotary triboelectrostatic separator
Autorzy:
Zhang, L.
Tao, Y.
Tao, D.
Zhang, W.
Yang, L.
Powiązania:
https://bibliotekanauki.pl/articles/110712.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fly ash
rotary triboelectrostatic separator
plate voltage
numerical simulation
Opis:
As the main solid wastes of coal-fired power plants, fly ash particles with different electrical properties are usually recycled using triboelectrostatic separator. The purpose of this study was to investigate the effect of different plate voltages on the separation of fly ash in a rotary triboelectrostatic separator with experiments and numerical simulation. The maximum values of yield of ash products (48.30%), and decarbonisation rate (50.89%) and the minimum loss-on-ignition (6.61%) were obtained when the plate voltage was 24 kV in the separation experiments, while 55.98%, 59.46%, 5.80% were reached respectively when the plate voltage was 26 kV in the simulation. In general, experimental data were similar with numerical simulation. The turning points appeared around 25 kV due to the increasing mismatch in products, which resulted from the reinforced rebound phenomena, namely the charged particle rebound from the electrode plate with a larger reflection velocity, when the plate voltage increased from 18 to 28 kV. It was validated by the numerical simulation results.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 722-731
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Field Study of Microstructure Evolution in Eutectoid Phase Transformation – I Nucleation
Autorzy:
Zhang, D.
Yin, Y.
Zhou, J.
Tu, Z.
Powiązania:
https://bibliotekanauki.pl/articles/381800.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
eutectoid
nucleation models
microstructure
numerical simulation
phase field
eutektoid
ziarna
mikrostruktura
symulacja numeryczna
Opis:
Eutectoid growth, as the important reaction mechanism of the carbon steel heat treatment, is the basis to control the microstructure and performance. At present, most studies have focused on lamellar growth, and did not consider the nucleation process. Mainly due to the nucleation theory is inconclusive, a lot of research can support their own theory in a certain range. Based on the existing nucleation theory, this paper proposes a cooperative nucleation model to simulate the nucleation process of eutectoid growth. In order to ensure that the nucleation process is more suitable to the theoretical results, different correction methods were used to amend the model respectively. The results of numerical simulation show that when the model is unmodified, the lateral growth of single phase is faster than that of longitudinal growth, so the morphology is oval. Then, the effects of diffusion correction, mobility correction and ledges nucleation mechanism correction on the morphology of nucleation and the nucleation rate were studied respectively. It was found that the introduction of boundary diffusion and the nucleation mechanism of the ledges could lead to a more realistic pearlite.
Źródło:
Archives of Foundry Engineering; 2017, 17, 3; 155-162
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigation of root canal irrigation adopting innovative needles with dimple and protrusion
Autorzy:
Li, P.
Zhang, D.
Xie, Y.
Lan, J.
Powiązania:
https://bibliotekanauki.pl/articles/307257.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dimple
protrusion
innovative needles
numerical simulation
passive flow control methods
root canal irrigation
wychylenie zębów
symulacja komputerowa
kanał zębowy
Opis:
As important passive flow control methods, dimples and protrusions have been successfully implemented via geometric modifications to manipulate flow fields to get a desired flow parameters enhancement. In this research, two novel needles were proposed based on a prototype by means of the dimple and protrusion, and flow patterns within a root canal during final irrigation with these needles were numerically investigated. The calculation cases consistent with the clinically realistic irrigant flow rates, which are 0.02, 0.16 and 0.26 mL s–1 are marked as case A, B and C, respectively. The characteristic parameters to estimate irrigation efficiency, such as shearing effect, mean apical pressure, irrigation replacement and fluid agitation, were compared and the optimal geometry in every calculation case was obtained. As shown from the results, flow rates and needle geometries were the causes of irrigation parameters variations. The sum of shear stress, irrigation replacement and fluid agitation were equal in the low flow rate case A, however, the needle with a protrusion on its tip had advantages in the three irrigation characteristic parameters above in calculation case B, and the needle with a dimple on its tip had advantages in calculation case C. Furthermore, the needles proposed did not give rise to the risk of irrigant extrusion. These needles can be better choices at larger flow rates. Therefore, needle geometry optimizations utilizing passive flow control methods are worthy to be investigated in the root canal irrigation enhancement.
Źródło:
Acta of Bioengineering and Biomechanics; 2013, 15, 1; 43-50
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies