Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "copper flotation" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Investigation of effective parameters for molybdenite recovery from porphyry copper ores in industrial flotation circuit
Autorzy:
Nakhaei, F.
Irannajad, M.
Powiązania:
https://bibliotekanauki.pl/articles/110240.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
copper
molybdenum
recovery
Opis:
The Sarcheshmeh copper mine is a significant copper and molybdenum producer. Sampling of the Sarcheshmeh flotation circuit (in a six-month period) showed that a large share of waste of molybdenite took place in rougher cells. Since the rougher cells tailing is transferred to tailing thickener, the main focus of this paper was on this section. In the current study, the factors which influence the recovery of molybdenite and copper were investigated. Molybdenite recovery in the bulk flotation circuit was consistently lower than that of the copper sulphides as well as being far more variable. This paper describes the methodically use of size by size recovery data, quantitative mineralogy, and liberation degree analysis to identify the factors contributing to molybdenite recovery relative to copper in industrial rougher circuit. The results showed that the size by size recovery for both metals in the ultrafine and coarse fractions recovery was reduced. On the other hand, the highest recovery occurred in the intermediate sizes from 27 μm to 55 μm. Molybdenum recovery in the fine and ultrafine and coarse fractions drops off to a greater extent than the recovery of copper. The investigations of degree liberation showed that the recovery of copper sulphides is more dependent on the liberation state of valuable minerals while for molybdenite some other factor splay a significant role.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 477-491
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of water quality change on copper flotation
Autorzy:
Acuña, Claudio
Aedo, Camila
Leiva, Claudio
Flores, Víctor
Powiązania:
https://bibliotekanauki.pl/articles/29552039.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
copper
molybdenum
water quality
wastewater
Opis:
Given the significant consumption and future demand for water resources, this paper intends to find the conditions for using a flotation process with different water quality. One of the alternatives is using water under secondary treatment with industrial water mixtures to partly recycle domestic wastewater and maximize metallurgical benefits. Results show that using wastewater (only with secondary treatment) in flotation is detrimental to copper recovery. However, molybdenum recovery is significantly improved. For mixtures with 50 [%] wastewater, 50 [ppm] frother, 20 [ppm] collector, and pH 10, copper recovery decrease amounts to 0.4 [%], while molybdenum shows a 2.4 [%] recovery increase. In addition, copper concentrate grade decreases by 1.4 [%], while molybdenum grade remains. Therefore, using wastewater is viable, particularly in the case of molybdenum. So, this study proposes using of water mixtures in the copper depression stage to improve molybdenum recovery.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 5; art. no. 186190
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of D-optimal design for optimizing copper-molybdenum sulphides flotation
Autorzy:
Nakhaei, F.
Irannajad, M.
Sam, A.
Jamalzadeh, A.
Powiązania:
https://bibliotekanauki.pl/articles/110187.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
copper
molybdenum
flotation
chemical reagents
D-optimal
optimization
Opis:
Froth flotation is widely used for concentration of base metal sulphide minerals in complex ores. One of the major challenges faced by flotation of these ores is selection of the type of flotation reagents. In this study, the D-optimal experimental design method was applied to determine the optimum conditions for flotation of copper and molybdenum in the rougher flotation circuit of the Sungun copper concentrator plant. The investigated parameters included types and dosages of collectors and frothers, diesel dosage and feed size distribution. The main effects on copper and molybdenum recoveries and grades were evaluated. Results of optimization showed that the highest possible grade and recovery were obtained for Z11 as a primary collector (20 g/Mg), R407 as a first promoter collector (20 g/Mg), X231 as a second promoter collector (7 g/Mg), A65 (15 g/Mg) and Pine oil as frothers (5 g/Mg), 20 g/Mg of diesel dosage, and d80 of feed size was equal to 80 μm. The analysis of variance showed that the primary promoter collector was the most significant parameter affecting the recovery of Cu, while diesel dosage and d80 were the most significant parameters influencing the Mo recovery.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 252-267
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies