Temat: uderzenia - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Impact Strength of Austenitic and Ferritic-Austenitic Cr-Ni Stainless Cast Steel in -40 and +20°C Temperature
Udarność kwasoospornego staliwa Cr-Ni w temperaturze -40 i +20°C
Autorzy:: Kalandyk, B.
Zapała, R.
Boroń, Ł.
Solecka, M.
Powiązania:: https://bibliotekanauki.pl/articles/353749.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: stainless cast steel
microstructure
impact strength
fractographic examination
staliwo nierdzewne
mikrostruktura
odporność na uderzenia
udarność
Opis:: Studies described in this paper relate to common grades of cast corrosion resistant Cr-Ni steel with different matrix. The test materials were subjected to heat treatment, which consisted in the solution annealing at 1060°C followed by cooling in water. The conducted investigations, besides the microstructural characteristics of selected cast steel grades, included the evaluation of hardness, toughness (at a temperature of -40 and +20°C) and type of fracture obtained after breaking the specimens on a Charpy impact testing machine. Based on the results of the measured volume fraction of ferrite, it has been found that the content of this phase in cast austenitic steel is 1.9%, while in the two-phase ferritic-austenitic grades it ranges from 50 to 58%. It has been demonstrated that within the scope of conducted studies, the cast steel of an austenitic structure is characterised by higher impact strength than the two-phase ferritic-austenitic (F-A) grade. The changing appearance of the fractures of the specimens reflected the impact strength values obtained in the tested materials. Fractures of the cast austenitic Cr-Ni steel obtained in these studies were of a ductile character, while fractures of the cast ferritic-austenitic grade were mostly of a mixed character with the predominance of brittle phase and well visible cleavage planes.
Zaprezentowane w artykule badania dotyczą popularnych gatunków kwasoodpornego staliwa Cr-Ni o różnej osnowie. Zastosowane do badań materiały poddano obróbce cieplnej (przesycanie w temperaturze 1060°C i chłodzenie w wodzie). Przeprowadzone badania oprócz charakterystyki mikrostruktury wybranych gatunków staliwa obejmowały ocenę twardości, udarności (w temperaturze -40 i +20°C) oraz charakteru przełomów uzyskanych w wyniku złamania próbek na młocie Charpie'go. Na podstawie uzyskanych wyników udziału objętościowego ferrytu stwierdzono, że w staliwie austenitycznym występuje 1.9% tej fazy, natomiast w dwóch staliwach ferrytyczno-austenitycznych (F-A) udział ferrytu mieścił się w przedziale 50÷58%. Wykazano, że staliwo o strukturze austenitycznej charakteryzuje się wyższą udarnością w porównaniu do dwufazowego staliwa ferrytyczno-austenitycznego (F-A). Zmiany jakie zaszły w charakterze przełomów próbek były odzwierciedleniem uzyskanych wyników udarności badanych materiałów. W zakresie przeprowadzonych badań przełomy austenitycznego staliwa Cr-Ni wykazują charakter ciągliwo-kruchy, a przełomy staliwa F-A są przeważnie przełomami o charakterze mieszanym z przewagą przełomu kruchego z widocznymi płaszczyznami łupliwości.
Źródło:: Archives of Metallurgy and Materials; 2014, 59, 3; 1103-1106
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Changes in Impact Strength and Abrasive Wear Resistance of Cast High Manganese Steel Due to the Formation of Primary Titanium Carbides
Autorzy:: Tęcza, G.
Zapała, R.
Powiązania:: https://bibliotekanauki.pl/articles/383189.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: high-manganese steel
microstructure
primary carbides
microhardness
impact strength
abrasion
stal wysokomanganowa
mikrostruktura
węgliki
mikrotwardość
siła uderzenia
Opis:: Cast high-manganese Hadfield steel is commonly used for machine components operating under dynamic load conditions. Their high fracture toughness and abrasive wear resistance is the result of an austenitic structure, which - while being ductile - at the same time tends to surface harden under the effect of cold work. Absence of dynamic loads (e.g. in the case of sand abrasion) causes rapid and premature wear of parts. In order to improve the abrasive wear resistance of cast high-manganese steel for operation under the conditions free from dynamic loads, primary titanium carbides are produced in this cast steel during melting process to obtain in castings, after melt solidification, the microstructure consisting of an austenitic matrix and primary carbides uniformly distributed therein. After heat treatment, the microhardness of the austenitic matrix of such cast steel is up to 580 μHV20 and the resulting carbides may reach even 4000 μHV20. The impact strength of this cast steel varies from 57 to 129 and it decreases with titanium content. Compared to common cast Hadfield steel, the abrasive wear resistance determined in Miller test is at least twice as high for the 0.4% Ti alloy and continues growing with titanium content.
Źródło:: Archives of Foundry Engineering; 2018, 18, 1; 119-122
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Impact strength of squeeze casting AlSi13Cu2–CF composite
Autorzy:: Zyska, A.
Konopka, Z.
Łągiewka, M.
Powiązania:: https://bibliotekanauki.pl/articles/946862.pdf
Data publikacji:: 2020
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: casting composites
squeeze method
carbon fibers
impact strength
microstructure
kompozyty
metoda wyciskania
włókna węglowe
siła uderzenia
mikrostruktura
Opis:: The paper presents the results of research on microstructure and impact strength of AlSi13Cu2 matrix composite reinforced by Ni-coating carbon fibers (CF) with a volume fraction of 5%, 10% and 15%. The composite suspensions were prepared using by stirring method and subsequently squeeze casted under different pressures of 25, 50, 75 and 100 MPa. As part of the study, fiber distribution in aluminum matrix was evaluated and variation in impact strength of composite as a function of the carbon fibers volume fraction and pressure applied were determined. It has been found that the presence of Ni coating on carbon fibers clearly improves their wettability by liquid aluminum alloy and in combination with the stirring parameters applied, composite material with relatively homogeneous structure can be produced. Charpy's test showed that the impact strength of composite reaches the highest value by carrying out the squeeze casting process at 75 MPa. In the next stage of research, it was found that the impact strength of composites increases with the increase of carbon fibers volume fraction and for 15% of fibers is close to 8 J/cm2. Observations of fracture surfaces have revealed that crack growth in the composites propagates with a quasi-cleavage mechanism. During the creation of the fracture, all fibers arranged perpendicular to its surface were sheared. At the same time, the metal matrix around the fibers deformed plastically creating characteristic ductile breaks. The fracture surface formation through the fibers indicates a cohesive and strong connection of the reinforcement with the matrix. In addition to the phenomena mentioned, debonding the fiber-matrix interfaces and the formation of voids between components were observed on the fracture surface.
Źródło:: Archives of Foundry Engineering; 2020, 20, 2; 49-52
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Influence of Rare Earth Metals on Microstructure and Mechanical Properties of G20Mn5 Cast Steel
Autorzy:: Kasińska, J.
Powiązania:: https://bibliotekanauki.pl/articles/379581.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: G20Mn5
rare earth metals
modification
microstructure
impact toughness
metale ziem rzadkich
modyfikacja
mikrostruktura
odporność na uderzenia
Opis:: The paper describes influence of rare earth metals (REMs) on G20Mn5 cast steel microstructure and mechanical properties. The cerium mixture of the following composition was used to modify cast steel: 49.8% Ce, 21.8% La, 17.1% Nd, 5,5% Pr and 5.35% of REMs. Cast steel was melted in industrial conditions. Two melts of non-modified and modified cast steel were made. Test ingots were subject to heat treatment by hardening (920°C/water) and tempering (720°C/air). Heat treatment processes were also performed in industrial conditions. After cutting flashes off samples of cast steel were collected with purpose to analyze chemical composition, a tensile test and impact toughness tests were conducted and microstructure was subject to observations. Modification with use of mischmetal did not cause significant changes in cast steel tensile strength and yield strength, while higher values were detected for fractures in the Charpy impact test, as they were twice as high as values for the data included in the PN-EN 10213:2008 standard. Observations performed by means of light and scanning microscopy proved occurrence of significant differences in grain dimensions and morphology of non-metallic inclusions. Adding REMs resulted in grain fragmentation and transformed inclusion shapes to rounded ones. Chemical composition analyses indicated that round inclusions in modified cast steel were generally oxysulphides containing cerium and lanthanum. In the paper the author proved positive influence of modification on G20Mn5 cast steel mechanical properties.
Źródło:: Archives of Foundry Engineering; 2018, 18, 3; 37-42
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "uderzenia" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język