Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "A.D." wg kryterium: Autor


Tytuł:
Microstructure silica leached by NaOH from semi-burned rice husk ash for moisture adsorbent
Autorzy:
A’yuni, D.Q.
Subagio, A.
Hadiyanto, H.
Kumoro, A.C.
Djaeni, M.
Powiązania:
https://bibliotekanauki.pl/articles/2175795.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
microstructure
moisture absorption
silica
rice husk ash
mikrostruktura
absorpcja wilgoci
krzemionka
popiół z łusek ryżu
Opis:
Purpose: This work aims to study the water vapor adsorption property of fine silica particles from semi-burned rice husk ash. The semi-burned rice husk ash is selected as the raw material since it contains high silica and is easily found as a by-product of pottery furnace combustion. Design/methodology/approach: The silica adsorbent from semi-burned rice husk ash was prepared through a sol-gel method using various NaOH concentrations. In doing so, the different pH precipitation was also observed. Here, the fine silica powder was obtained by pulverizing dry sol-gel. The product characterizations were conducted based on water adsorption capacity at different air relative humidity. Findings: The results show no significant effects of different treatments in the extraction and gelation process. The fine silica particles exhibit large porous surfaces with agglomerated nano-sized particles that formed pores. This porous structure is related to the distributions of pore size of each sample, which mostly obey the mesoporous characteristics. From sorption isotherm, weak adsorbent-adsorbate bonding was observed and demonstrated multilayer adsorption of mesoporous materials. Research limitations/implications: The study of water adsorption was carried out at room temperature, which can change at any time, even though has no significant effect on the humidity. However, it is needed to study the adsorption in an incubated area to receive a constant temperature. Practical implications: The products namely silica prepared from semi-burned rice husk ash show a high moisture uptake, especially at a high relative humidity region. This property can be comparable with the other silica preparation methods. So, this product can be a highly potential adsorbent for air or gas dehumidification systems. Originality/value: The silica-based semi-burned rice husk ash as a water adsorbent is more sustainable than commercial silica. This is a positive contribution to find a potentially develop water vapor adsorbent with good adsorption capacity. Besides, the synthesis process is a simple and low-cost process.
Źródło:
Archives of Materials Science and Engineering; 2021, 108, 1; 5--15
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of diffusion boriding and laser boriding on corrosion resistance Hardox 450 steel
Wpływ borowania dyfuzyjnego i laserowego na odporność korozyjną stali Hardox 450
Autorzy:
Kapcińska-Popowska, D.
Pertek-Owsianna, A.
Bartkowska, A.
Bartkowski, D.
Przestacki, D.
Powiązania:
https://bibliotekanauki.pl/articles/336866.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
diffusion boriding
laser boriding
microstructure
microhardness
corrosion resistance
borowanie dyfuzyjne
borowanie laserowe
mikrostruktura
mikrotwardość
odporność
korozja
Opis:
The article presented an influence of diffusion boriding and laser boriding on microstructure, microhardness and corrosion resistance of Hardox 450 steel. After the boron modification process of Hardox 450 steel was obtained an increase result of microhardness and resistance to corrosion. After the diffusion boriding obtained needle-like microstructure of microhardness 1800-1500 HV0.1. Whereas after laser boriding microstructure was consisted of a remelted zone (MZ), heataffected zone (HAZ) and core. In the remelted zone enriched in boron the microhardness was about 1600 HV 0.1. Corrosion resistance tests showed, that the higher corrosion resistance in solutions of pH = 3.5 and pH = 7.0 have a diffusion boriding layers, whereas in the pH = 11.0, the laser boriding layers.
W artykule przedstawiono wpływ borowania dyfuzyjnego i laserowego na mikrostrukturę, mikrotwardość i odporność korozyjną stali Hardox 450. Po procesie modyfikacji stali Hardox 450 borem uzyskano zwiększenie mikrotwardości i odporności na korozyjnej. W wyniku procesu borowania dyfuzyjnego warstwa miała iglastą strukturę o mikrotwardości ok. 1800-1500 HV0,1. Natomiast w wyniku borowania laserowego uzyskano budowę strefową składającą się ze strefy przetopionej, strefy wpływu ciepła oraz rdzenia. W strefie przetopionej wzbogaconej w bor mikrotwardość wynosiła ok. 1600 HV0,1. Badania odporności korozyjnej wykazały, że lepszą odporność korozyjną w roztworach pH = 3,5 oraz pH = 7,0 posiadają warstwy borowane dyfuzyjnie, natomiast w pH = 11,0 warstwy borowane laserowo.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 2; 40-45
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Different Mn/Fe Ratio on Microstructure Alloy Based on Al-Si-Mg
Autorzy:
Bolibruchova, D.
Ivanova, A.
Powiązania:
https://bibliotekanauki.pl/articles/383021.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AlSiMg alloys
manganese
intermetallic phases
microstructure
stopy AlSiMg
mangan
fazy międzymetaliczne
mikrostruktura
Opis:
This article deals with the effect of manganese that is the most applied element to eliminate the negative effect of iron in the investigated alloy AlSi7Mg0.3. In this time are several methods that are used for elimination harmful effect of iron. The most used method is elimination by applying the additive elements, so-called iron correctors. The influence of manganese on the morphology of excluded iron-based intermetallic phases was analysed at various iron contents (0.4; 0.8 and 1.2 wt. %). The effect of manganese was assessed in additions of 0.1; 0.2; 0.4 and 0.6 wt. % Mn. The morphology of iron intermetallic phases was assessed using electron microscopy (SEM) and EDX analysis. The increase of iron content in investigated alloys caused the formation of more intermetallic phases and this effect has been more significant with higher concentrations of manganese. The measurements carried out also showed that alloys with the same Mn/Fe ratio can manifest different structures and characteristics of excluded iron-based intermetallic phases, which might, at the same time, be related to different resulting mechanical properties.
Źródło:
Archives of Foundry Engineering; 2019, 3; 15-20
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dry Sliding Friction and Wear Behaviour of Leaded Tin bronze for Bearing and Bushing Application
Autorzy:
Dinesh, D.
Megalingam, A.
Powiązania:
https://bibliotekanauki.pl/articles/2049132.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wear
coefficient of friction
microstructure
leaded tin bronze
grey relational analysis
Opis:
Among different bearing materials, copper-based alloys are the most important source for bearing and bushing applications. In this work, the tribological behavior of a leaded tin bronze (Cu-22Pb-4Sn) against an EN31 Steel for various loads (20 N, 70 N, 120 N) and different sliding velocity (1 m/s, 3 m/s, 5 m/s) at 3000 m sliding distance is performed using a pin on disk tribometer. Irrespective of all loads and sliding velocity, a higher specific wear rate is observed at 1 m/s and 120 n that fails to facilitate the formation of lubricating film, whereas a lower specific wear rate is evident when the sliding velocity is increased to 5 m/s. This is attributed to the formation of a stable oxide layer that has been confirmed through the energy dispersive X-ray spectroscopy analysis and scanning electron microscopy. The coefficient of friction is observed in reducing trend from 0.69 to 0.48 for the increasing load (70 N, 120 N) and sliding velocity (3 m/s and 5 m/s) due to stable thin oxide film formation. Also, the increase in frictional force and loading the interacting surface temperature is increased to a maximum of 102°C. The grey relational analysis indicates that the optimal parameters for the minimum specific wear rate and coefficient of friction is 120 N and 5 m/s that has been confirmed with experimental analysis.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 1095-1104
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and selected properties of boronized layers produced on C45 and CT90 steels after modification by diode laser
Autorzy:
Bartkowska, A.
Bartkowski, D.
Przestacki, D.
Talarczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/94128.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
boronized layer
laser remelting
microstructure
microhardness
corrosion resistance
Opis:
The paper presents the study results of macro- and microstructure, microhardness and corrosion resistance of C45 medium carbon steel and CT90 high carbon steel after diffusion boriding and laser modification by diode laser. It was found that the increase of carbon content reduced the thickness of boronized layer and caused change in their morphology. Diffusion boronized layers were composed of FeB and Fe2B iron borides. As a result of laser surface modification of these layers, the microstructure composed of three areas: remelted zone, heat affected zone (HAZ) and the substrate was obtained. Microhardness of laser remelting boronized layer in comparison with diffusion boronized layer was lower. The presence of HAZ was advantageous, because mild microhardness gradient between the layer and the substrate was assured. The specimens with laser boronized layers were characterized by better corrosion resistance than specimens without modified layer.
Źródło:
Archives of Mechanical Technology and Materials; 2016, 36; 51-58
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected properties of diffusion boronized layer modified with copper
Wybrane właściwości warstwy borowanej dyfuzyjnie modyfikowanej miedzią
Autorzy:
Bartkowska, A.
Pertek-Owsianna, A.
Bartkowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/334753.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
boronizing
borocopperizing
microstructure
microhardness
fracture toughness
cohesion
wear resistance
borowanie
boromiedziowanie
mikrostruktura
mikrotwardość
odporność
kruche pękanie
kohezja
zużycie
tarcie
Opis:
The paper presents the results of studies on microstructure, microhardness, fracture toughness, cohesion and wear resistance of copper modified boronized layers. Borocopperizing process consisted in simultaneous introduction of metallic copper and amorphous boron by diffusion. Borocopperized layers, similarly to boronized layers have a single-zone structure. It was observed that diffusion borocopperizing had a positive effect on microhardness, brittleness, cohesion and wear resistance.
W pracy przedstawiono wyniki mikrostruktury, mikrotwardości, odporności na kruche pękanie, kohezji i odporności na zużycie przez tarcie warstw borowanych modyfikowanych miedzią. Proces boromiedziowania polegał na dyfuzyjnym wprowadzeniu miedzi metalicznej i boru amorficznego. Otrzymane warstwy miały podobnie jak warstwy borowane budowę jednostrefową. Stwierdzono korzystny wpływ boromiedziowania dyfuzyjnego na mikrotwardość, kruchość, kohezję oraz odporność na zużycie przez tarcie.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 2; 15-20
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wear and corrosion resistance of C45 steel laser alloyed with boron and silicon
Odporność na zużycie przez tarcie i korozję stali C45 stopowanej laserowo borem i krzemem
Autorzy:
Bartkowska, A.
Pertek-Owsianna, A.
Bartkowski, D.
Popławski, M.
Przestacki, D.
Powiązania:
https://bibliotekanauki.pl/articles/335136.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
laser alloying
boronizing
siliconizing
borosiliconizing
microstructure
microhardness
wear resistance
corrosion resistance
laserowe stopowanie
borowanie
krzemowanie
borokrzemowanie
mikrostruktura
mikrotwardość
odporność
zużycie
tarcie
odporność korozyjna
Opis:
The paper presents the results of studies on microstructure, microhardness, wear and corrosion resistance of C45 steel laser alloyed with boron end silicon. The aim of laser alloying was to cover the steel with the modifying element and then melting it with a laser beam. As a result of laser alloying a layer was obtained that was composed of remelted zone enriched in modifying elements and of heat affected zone. It was found that as a result of laser alloying with boron and silicon layer are formed that are characterized by good corrosion and wear resistance, high microhardness compared to laser boronized and laser siliconized layers.
W pracy przedstawiono wyniki mikrostruktury, mikrotwardości, odporności na zużycie przez tarcie i odporności korozyjnej stali C45 laserowo stopowanej borem i krzemem. Laserowe stopowanie polegało na nałożeniu pokrycia z pierwiastkiem modyfikującym, a następnie przetopieniu go wiązką laserową. W wyniku laserowego stopowania uzyskano warstwę złożoną z strefy przetopionej wzbogaconej w pierwiastek modyfikujący oraz strefy wpływu ciepła. Stwierdzono, że w wyniku laserowego stopowania borem i krzemem powstają warstwy, które charakteryzują się dobrą odpornością na korozję oraz na zużycie przez tarcie, dużą mikrotwardością w stosunku do warstw borowanych laserowo czy krzemowanych laserowo.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 2; 10-14
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diffusion and laser boriding of Hardox 450 steel
Borowanie dyfuzyjne i laserowe stali Hardox 450
Autorzy:
Kapcińska-Popowska, D.
Pertek-Owsianna, A.
Bartkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/335550.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
diffusion boriding
laser boriding
microstructure
microhardness
wear resistance
borowanie dyfuzyjne
borowanie laserowe
mikrostruktura
mikrotwardość
odporność
zużycie przez tarcie
Opis:
The effect of diffusion and laser boriding on the microstructure, microhardness and wear resistance of Hardox 450 steel compared to initial state is the subject of this article. After the boron modification process of Hardox 450 steel microhard-ness and wear resistance increased. After the diffusion boriding a needle-like microstructure of microhardness about 1800-1500 HV0.1 was obtained. As a result of laser boronizing the microstructure consisted of a remelted zone (MZ), heat-affected zone (HAZ) and core. In the remelted zone enriched of boron microhardness was about 1500-1600 HV0.1 The wear resistance tests showed the higher wear resistance of the diffusion borided layers, whereas the lower were in initial state but the lowest was for laser borided layer.
W pracy przedstawiono wpływ borowania dyfuzyjnego i laserowego na mikrostrukturę, mikrotwardość oraz odporność na zużycie przez tarcie stali Hardox 450 w porównaniu do stali w stanie wyjściowym. Po procesie modyfikacji stali Hardox 450 borem uzyskano zwiększenie mikrotwardości i odporności na zużycie przez tarcie. W wyniku procesu borowania dyfuzyjnego warstwa miała iglastą strukturę o mikrotwardości ok. 1800-1500 HV0,1. Natomiast w wyniku borowania laserowe-go uzyskano budowę strefową składającą się ze strefy przetopionej, strefy wpływu ciepła oraz rdzenia. W strefie przetopionej wzbogaconej w bor mikrotwardość wynosiła ok. 1500-1600 HV0,1. Badania odporności na zużycie przez tarcie wykazały, że najlepszą odporność posiada warstwa borowana dyfuzyjnie, natomiast mniejszą stal w stanie wyjściowym a najmniejszą warstwa borowana laserowo.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2015, 60, 2; 40-42
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Addition of Titanium on The Structure and Properties of High Chromium Cast Iron
Autorzy:
Kopyciński, D.
Guzik, E.
Siekaniec, D.
Szczęsny, A.
Powiązania:
https://bibliotekanauki.pl/articles/383123.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high chromium cast iron
titanium
bending strength
hardness
microstructure
żeliwo wysokochromowe
tytan
wytrzymałość materiałów
twardość
mikrostruktura
Opis:
The paper presents results of Ti-addition to High Chromium Cast Iron (HCCI) on the structure and selected mechanical properties. For this study casted two sets of cylinders with dimensions ø20 mm, ø15 mm x 250 mm, for the High Chromium Cast Iron (HCCI) and with the 4% by mass Ti-addition. Melts were performed in the induction furnace crucible capacity of 15 kg. During the heats the cup with installed S type thermocouple was poured to record the cooling curves. The cylinders were subjected to the static bending strength test. Samples for the test microstructure and Rockwell hardness were cut from the cylinders. The study shows that the addition of titanium had an impact on the structure and thus the properties of High Chromium Cast Iron (HCCI). In subsequent studies, through an appropriate choice of chemical composition and proper process control, it is planned to obtain in the structure the titanium carbides TiC and chromium carbides with type (Cr, Fe)7C3.
Źródło:
Archives of Foundry Engineering; 2015, 15, 3; 35-38
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laser modification of B-Ni galvanic-diffusion layer
Laserowa modyfikacja warstwy B-Ni galwaniczno-dyfuzyjnej
Autorzy:
Bartkowska, A.
Pertek-Owsianna, A.
Przestacki, D.
Powiązania:
https://bibliotekanauki.pl/articles/334971.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
laser remelting
diffusion boronizing
nickel plating
microstructure
microhardness
laserowe przetapianie
borowanie dyfuzyjne
niklowanie galwaniczne
modyfikacja
mikrostruktura
mikrotwardość
Opis:
The paper presents test results for boronickelized C45 steel after laser surface modification. Influence of laser heat treatment on the microstructure, microhardness, cohesion and wear resistance of surface layer was investigated. The process of galvanic-diffusion boronickelized layer consists of nickel plating followed by diffusion boronizing. For nickel plating Watts bath was used, which uses a combination of nickel sulfate and nickel chloride, along with boric acid. Diffusion boronizing treatment was used in the gas-contact method at temperature 950ºC for 4 h in boronizing powder, containing: amorphous boron, KBF4 as activator and carbon black as a filler. The laser heat treatment (LHT) was carried out with technological laser TRUMPF TLF 2600 Turbo CO2 of nominal power 2.6 kW. Laser modification of the boronickelized layer was carried out with laser power P 1.04 kW and at laser beam scanning rate v: 0.67 m∙min-1, 1.12 m∙min-1, 2.88 m∙min-1 and laser beam d = 2 mm. After boronickelizing the microstructure of surface layer was composed of: compact-continuous subsurface zone of microhardness 1200 HV0,1, and deeper situated zone , at microhardness similar to needle-like iron borides. After laser heat treatment with re-melting, a new layer was obtained, which included: re-melted zone (MZ), heat affected zone (HAZ) and a substrate, with a mild microhardness gradient from the surface to the substrate. The microhardness measured along the axis of track after laser heat treatment of the boronickelized layer was about 1100 HV0,1. As a result of the influence of laser beam, the new layer was characterized by good properties in comparison to boronized and boronickelized layers.
W pracy przedstawiono wyniki badań boroniklowanej stali C45 po laserowej modyfikacji. Badano wpływ laserowej obróbki cieplnej na mikrostrukturę, mikrotwardość, kohezję i odporność na zużycie przez tarcie wytworzonej warstwy. Proces wytwarzania galwaniczno-dyfuzyjnej warstwy boroniklowanej składał się z: nakładania wstępnej powłoki galwanicznej niklu i następnego borowania dyfuzyjnego. Do niklowania galwanicznego użyto kąpieli Wattsa, która składała się z siarczanu niklawego, chlorku niklawego, kwasu borowego. Borowanie dyfuzyjne prowadzono metodą gazowo-kontaktową w temperaturze 950o C w proszku borującym zawierającym bor amorficzny, aktywator KBF4 i wypełniacz w postaci sadzy. Laserowa obróbka cieplna (LOC) była wykonana przy użyciu lasera technologicznego CO2 firmy TRUMPF TLF 2600 Turbo o mocy nominalnej 2,6 kW. Laserową modyfikację warstwy boroniklowanej przeprowadzono przy użyciu mocy lasera P = 1,04 kW i prędkości skanowania wiązką laserową v: 0,67 m∙min-1, 1,12 m∙min-1, 2,88 m∙min-1, średnicy wiązki lasera d = 2 mm. Po boroniklowaniu struktura warstwy wierzchniej składa się z: przypowierzchniowej zwartej ciągłej strefy o mikrotwardości 1200 HV0,1 i głębiej położonej o strukturze iglastej odpowiadającej mikrotwardości borkom żelaza oraz rdzenia. Po laserowej obróbce cieplnej z przetopieniem otrzymano nową warstwę składającej się z: strefy przetopionej (SP), strefy wpływu ciepła (SWC) i rdzenia o łagodnym gradiencie mikrotwardości od powierzchni do rdzenia. Mikrotwardość w osi ścieżki warstwy wierzchniej laserowo obrobionej cieplnie wynosiła 1100 HV0,1. W wyniku oddziaływania wiązki lasera otrzymana warstwa charakteryzowała się dobrymi właściwościami w stosunku do warstw borowanej i boroniklowanej.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 1; 6-11
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ borowania dyfuzyjnego na mikrostrukturę i wybrane właściwości stali konstrukcyjnej
Influence of boronizing on microstructure and selected properties of constructional steel
Autorzy:
Pertek, A.
Kapcińska-Popowska, D.
Bartkowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/334130.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
stale konstrukcyjne
borowanie dyfuzyjne
mikrostruktura
właściwości fizykochemiczne
constructional steels
boronizing
microstructure
physicochemical properties
Opis:
W artykule przedstawiono porównawcze badania wpływu borowania dyfuzyjnego na właściwości stali C45 i 41Cr4. Zbadano mikrostrukturę, skład fazowy, mikrotwardość, odporność na kruche pękanie i odporność na zużycie przez tarcie tych stali.
The article presents a comparative research of influence of boronizing on the properties of C45 and 41Cr4 steels. Microstructure, phase composition, microhardness, fracture toughness and wear resistance of the steels were examined.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2013, 58, 1; 147-150
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat treatment and thermochemical treatment of tool steel
Obróbka cieplna i cieplno-chemiczna stali narzędziowej
Autorzy:
Bartkowska, A.
Popławski, M.
Przestacki, D.
Powiązania:
https://bibliotekanauki.pl/articles/335130.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
diffusion boronizing
microstructure
microhardness
agricultural tools
borowanie dyfuzyjne
mikrostruktura
mikrotwardość
części
maszyna rolnicza
Opis:
The paper presents results of studies of the influence of substrate heat treatment on microstructure and microhardness of boronized tool steels. Diffusion boronizing treatment process was carried out using boronizing powder at temperature of 900ºC for 5 h. After boronizing the microstructure of surface layer was composed of needle-like iron borides. The micro-hardness in the boronized layer was about 1800 HV0,1. The appropriate heat treatment with diffusion boronizing process provides good properties of tool steels such as high hardness, and also good cohesion between subsurface layer and the substrate. This is very important for increasing longevity of tools and parts of machines as tools covered with a resultant boronized layer which can be successfully used in agricultural machines.
W pracy przedstawiono wyniki obróbki cieplnej podłoża na mikrostrukturę i mikrotwardość borowanej stali narzędziowej. Proces borowania dyfuzyjnego stali narzędziowej przeprowadzono w proszku borującym w temperaturze 900ºC w czasie 5 h. Po procesie borowania mikrostruktura warstwy powierzchniowej składała się z iglastych borków żelaza. Mikro-twardość w borowanej warstwie wynosiła ok. 1800 HV0,1. Właściwa obróbka cieplna połączona z procesem dyfuzyjnego borowania prowadzi do otrzymania dobrych właściwości stali narzędziowej, takich jak duża twardość, a przy tym dobra kohezja między warstwą powierzchniową a podłożem. To jest bardzo istotne w celu zwiększenia żywotności narzędzi i części maszyn i narzędzi z wytworzoną warstwą borowaną, które mogą być z powodzeniem stosowane w maszynach rolniczych.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2015, 60, 2; 9-11
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania właściwości mikrostrukturalnych oraz analiza struktury nadcząsteczkowej przędzy filtracyjnej na bazie syntetycznych polimerów włóknotwórczych
Testing of microstructural and analysis of the structure of supermolecular yarn filter based on synthetic fiber-forming polymers
Autorzy:
Margol, M.
Kwiatkowski, D.
Wacowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/279142.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
mikrostruktura
krystaliczność
przędza syntetyczna
filtracja
microstructure
crystallinity
synthetic yarn
filtration
Opis:
W artykule dokonano analizy mikrostruktury oraz wyznaczono procentową zawartość struktury krystalicznej (Sk) dla przędzy wykonanej z mieszaniny PP/PE mającej zastosowanie do produkcji tkanin filtracyjnych. Badania przeprowadzono przy użyciu elektronowej mikroskopii scanningowej oraz dyfraktometrii rentgenowskiej XRD. Opisano technologię wytwarzania materiału badawczego - przędzenia ze stopionej masy polimeru.
This article analyzes the microstructure and determination of the percentage of crystalline structure (Sk) for a yarn made of a mixture of PP/PE applicable to the production of filter fabrics. Studies were conducted using electron microscopy and X-ray diffractometry scanningowej XRD. Described manufacturing technology research material - spinning the molten polymer.
Źródło:
Przetwórstwo Tworzyw; 2016, T. 22, Nr 4 (172), 4 (172); 276-284
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure, phase composition and corrosion resistance of Ni2O3 coatings produced using laser alloying method
Autorzy:
Bartkowska, A.
Przestacki, D.
Chwalczuk, T.
Powiązania:
https://bibliotekanauki.pl/articles/94146.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
laser alloying
Ni2O3 oxide
microstructure
microhardness
corrosion resistance
stopowanie laserowe
tlenek Ni2O3
mikrostruktura
mikrotwardość
odporność na korozję
Opis:
The paper presents the studies' results of microstructure, microhardness, cohesion, phase composition and the corrosion resistance analysis of C45 steel after laser alloying with nickel oxide Ni2O3. The aim of the laser alloying was to obtain the surface layer with new properties through covering C45 steel by precoat containing modifying compound, and then remelting this precoat using laser beam. As a result of this process the surface layer consisting of remelted zone and heat affected zone was obtained. In the remelted zone an increased amount of modifying elements was observed. It was also found that the surface layer formed during the laser alloying with Ni2O3 was characterized by good corrosion resistance. This property has changed depending on the thickness of the applied precoat. It was observed that the thickness increase of nickel oxides precoat improves corrosion resistance of produced coatings.
Źródło:
Archives of Mechanical Technology and Materials; 2016, 36; 23-29
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface condition, microstructure and microhardness of boronized layers produced on Vanadis-6 steel after modification by diode laser
Autorzy:
Bartkowska, A.
Jurči, P.
Bartkowski, D.
Przestacki, D.
Hudáková, M.
Powiązania:
https://bibliotekanauki.pl/articles/94204.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
boronized layer
laser remelting
microstructure
microhardness
przetapianie laserowe
mikrostruktura
mikrotwardość
Opis:
The paper presents the study results of surface condition, microstructure and microhardness of Vanadis-6 tool steel after diffusion boriding and laser modification by diode laser. As a result of diffusion boriding the layers consisted of two phases: FeB and Fe 2B. A bright area under the continuous boronized layers was visible. This zone was probably rich in boron. As a result of laser surface modification of boronized layers, the microstructure composed of three zones: remelted zone, heat affected zone and the substrate was obtained. The microstructure of remelted zone consisted of boron-martensite eutectic. The depth of laser track (total thickness of remelted zone and heat affected zone) was dependent on laser parameters (laser beam power density and scanning laser beam velocity). The microhardness of laser remelting boronized layer in comparison with diffusion boronized layer was slightly lower. The presence of heat affected zone was advantageous, because it allowed to obtain a mild microhardness gradient between the layer and the substrate.
Źródło:
Archives of Mechanical Technology and Materials; 2017, 37; 70-75
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies