Temat: micro-grooves - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Surface topography of non-operated slide journal micro-bearings
Autorzy:: Czaban, A.
Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/242167.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: atomic force microscope
surface topography
microgrooves
herringbone grooves
micro-bearing
Opis:: In this paper authors present results of measurements of slide journal bearings surface topography measured with an atomic force microscope (AFM). The results of measurements of surface topography were presented in the form of surface topography maps, three-dimensional graphs and some examples of selected cross-sections of investigated surface in the form of profile graphs. Measurements of surface topography were made for journals and sleeves of slide journal micro-bearings from personal computers' hard drives and fans, with the Atomic Force Microscope NT-206 produced in MTM in Minsk, Republic of Belarus. The values of profile roughness parameters Ra and Rq and the distance between maximum peak height and maximum valley depth are presented as well. The application SurfaceXplorerŽ was used for processing and visualization of the data obtained from AFM NT-206, which besides from generating 2D, 3D and profile diagrams, was used to calculate and draw graph of height distribution. Surface pictures of investigated bearings sleeves were made with the optical microscope Zeiss Axiovert 25+. That measurements give information about micro-grooves dimensions and location. On the surfaces of studied micro-bearings some micro-grooves can be found in form of herringbone, with depth about 1.5mi m and width 150/mi m. Received information about micro-grooves geometry will allow to develop proper theory of hydrodynamic lubrication for micro-bearings with micro-grooves. Topography of surfaces of investigated journal micro-bearings will be reconsidered after exploiting them proper amount of time.
Źródło:: Journal of KONES; 2011, 18, 2; 109-115
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Surface topography of operated slide journal micro - bearings used in computer fans
Autorzy:: Miszczak, A.
Czaban, A.
Labuda, W.
Powiązania:: https://bibliotekanauki.pl/articles/242980.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: atomic force microscope
surface topography
microgrooves
herringbone grooves
micro-bearing
Opis:: In this paper authors present results of measurements of slide journal bearings surface topography measured with a profilometer and an atomic force microscope (AFM). Surface topography of investigated bearings (i.e. journals and sleeves) was measured using the Hommeltester T8000- R60 profilometer. The results of these measurements give information about micro-grooves dimensions and location. Measurements of surface topography were made for journals and sleeves of slide journal micro-bearings from personal computers fans, with the Atomic Force Microscope NT-206 produced in MTM in Minsk, Republic of Belarus. The results of measurements of surface topography were presented in the form of surface topography maps, threedimensional graphs and some examples of selected cross-sections of investigated surfaces in the form of profile graphs. The values of profile roughness parameters Ra and Rq and the distance between maximum peak height and maximum valley depth are presented as well. The application SurfaceXplorer registered trademark was used for processing and visualization of the data obtained from AFM NT-206, which besides from generating 2D, 3D and profile diagrams, was used to calculate and draw graphs of height distribution. In this research authors used two identical sets of micro-bearings. The investigated bearings are: a) Kama Flow SP0825FDB12H fan with grooved surface of bearing sleeve, b) Xilence Case fan which sleeve surface was without grooves. First set of that micro-bearings functioned for a year at rated RPM continuously (i.e. 24 hours a day). Second set of the same micro-bearings also functioned for a year at rated RPM, but in intermittent mode (i.e. 15 minutes on, 15 minutes off). On the surfaces of studied micro-bearings some microgrooves can be found in form of herringbone, with depth about 1-2..m and width 100-150..m. Received information about microgrooves geometry will help to develop proper theory of hydrodynamic lubrication for micro-bearings with microgrooves and allows determining how the mode of operating affects on the wear of co-operating surfaces.
Źródło:: Journal of KONES; 2012, 19, 4; 457-463
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Surface topography of operated slide journal micro - bearings used in HDD
Autorzy:: Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/242978.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: atomic force microscope
surface topography
microgrooves
herringbone grooves
micro bearing in HDD
Opis:: In this paper author present results of measurements of slide journal micro-bearings surface topography measured with an atomic force microscope (AFM). The results of measurements of surface topography were presented in the form of surface topography maps, three-dimensional graphs and some examples of selected cross-sections of investigated surface in the form of profile graphs. Measurements of surface topography were made for journals and sleeves of slide journal micro-bearings from personal computers' hard disc drives, with the Atomic Force Microscope NT-206 produced in MTM in Minsk, Republic of Belarus. In this research author used two identical sets of micro-bearings from 2.5" HDD Samsung HM160HI 5400rpm and 3.5" HDD Seagate Barracuda 7200.10 ST380815AS 7200 rpm hard disc drives. First set of those four microbearings worked for a year at rated RPM continuously (i.e. 24 hours a day). Second set of the same micro-bearings also worked for a year at rated RPM, but in intermittent mode (i.e. 15 minutes on, 15 minutes off). The values of profile roughness parameters Ra and Rq and the distance between maximum peak height and maximum valley depth are presented as well. The application SurfaceXplorer registered trademark was used for processing and visualization of the data obtained from AFM NT-206, which besides from generating 2D, 3D and profile diagrams, was used to calculate and draw graph of height distribution. Surface topography of investigated bearings sleeves was also measured using Hommeltester T8000-R60 profilometer. Those measurements give information about micro-grooves dimensions and location. On the surfaces of studied micro-bearings, some micro-grooves can be found in form of herringbone, with depth about 1.5..m and width 150..m. Received information about micro-grooves geometry will allow developing proper theory of hydrodynamic lubrication for micro-bearings with micro-grooves.
Źródło:: Journal of KONES; 2012, 19, 4; 449-456
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "micro-grooves" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język