Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "K.M." wg kryterium: Autor


Tytuł:
Mechanical and Ballistic Properties of Spherical Single Base Gun Propellant
Autorzy:
Boulkadid, K. M.
Lefebvre, M. H.
Jeunieau, L.
Dejeaifve, A.
Powiązania:
https://bibliotekanauki.pl/articles/357976.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
mechanical properties
firing temperature
gun propellant
ageing
ballistic firing
closed vessel tests
Opis:
The effect of the initial temperature on the mechanical properties of spherical single base gun propellant was investigated by means of a compression test, which consisted of compression of a propellant bed conditioned at various initial temperatures. Following this mechanical treatment, the pressed grains (after thermal conditioning at ambient temperature) were tested in a closed vessel. The results from the combination of compression and closed vessel tests supported the assumption that there are two phenomena occurring inside the cartridge at low temperatures which compensate each other; the first is a decrease in the burning rate as the initial temperature is decreased, and the second is grain fracturing occurring on ignition. Additionally, a specific parameter, the specific surface area, turns out to be an appropriate parameter for quantifying the mechanical damage to the propellant grain resulting from the compression test. Tests on the aged propellant have also been conducted.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 1; 90-104
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preconditiong and Inoculation of Low Sulphur Grey Iron
Autorzy:
Hossain, Md Sojib S.
Bazlur B. Rashid, A. K. M.
Powiązania:
https://bibliotekanauki.pl/articles/380548.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
grey iron
metallography
mechanical properties
cementite
preconditioner
inoculant
żeliwo szare
metalografia
właściwości mechaniczne
cementyt
Opis:
For quality grey cast iron production, the challenging issues are to avoid cementite structure and obtain the desired graphite morphology with proper matrix as well as hardness. The objective of the present research is to find out the right combination of preconditioner and inoculant that may help to overcome the challenges. In this work, sulphur content is kept low (0.01%). Two preconditioners namely metallurgical SiC and zirconium bearing FeSi with two types of inoculant are individually used to make four combinations of sample and for each case metal is poured into the green sand mould. Finally Brinell hardness and graphite morphology is observed in the thickest and thinnest portions of the castings. Metallurgical SiC with barium bearing inoculant gives better graphite morphology and hardness than strontium bearing inoculant, on the other hand zirconium bearing FeSi gives more satisfying result than SiC with every type of inoculant. Among all of the combinations Zr bearing preconditioner with Ba bearing inoculant gives good graphite morphology with best mechanical properties in both thickest and thinnest portions of the casting.
Źródło:
Archives of Foundry Engineering; 2020, 20, 1; 61-66
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Gamma Radiation on the Mechanical Properties of Natural Fabric Reinforced Polyester Composites
Wpływ promieniowania gamma na właściwości mechaniczne kompozytów poliestrowych wzmocnionych tkaniną naturalną
Autorzy:
Motaleb, K.Z.M. Abdul
Islam, Md Shariful
Milašius, Rimvydas
Powiązania:
https://bibliotekanauki.pl/articles/233411.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
fabric reinforced composites
pineapple fabric
jute fabric
polyester resin
gamma radiation
mechanical properties
kompozyty wzmocnione tkaniną
tkanina ananasowa
tkanina jutowa
żywica poliestrowa
promieniowanie gamma
właściwości mechaniczne
Opis:
Two types of composites: (1) pineapple fabric reinforced polyester resin (pineapple/PR) and (2) jute fabric reinforced polyester resin (jute/PR) were prepared and the mechanical properties investigated for various gamma radiation doses ranging from 100-500 krad. Properties like tensile strength, Young’s modulus, elongation-at-break, bending strength, bending modulus and impact strength were increased significantly by 19%, 32%, 45%, 32%, 47% and 20%, respectively, at a dose of 300 krad for pineapple/PR, and by 47%, 49%, 42%, 45%, 52% and 65%, respectively, at a dose of 200 krad for the jute/PR composite in comparison to the non-irradiated composite. Gamma radiation improved the mechanical properties, but overdoses of radiation even caused a reduction in them.
W pracy przygotowano dwa rodzaje kompozytów (1) żywica poliestrowa wzmocniona tkaniną ananasową (Pineapple/PR) i (2) żywica poliestrowa wzmocniona tkaniną jutową (Jute/PR), a następnie zbadano wpływ na właściwości mechaniczne kompozytów różnych dawek promieniowania gamma w zakresie od 100-500 krad. Właściwości takie jak wytrzymałość na rozciąganie, moduł Younga, wydłużenie przy zerwaniu, wytrzymałość na zginanie, moduł zginania i wytrzymałość na uderzenia zostały znacznie polepszone odpowiednio o 19%, 32%, 45%, 32%, 47% i 20% w dawce 300 krad dla Pineapple/PR, podczas gdy odpowiednio 47%, 49%, 42%, 45%, 52% i 65% w dawce 200 krad dla kompozytu Jute/PR w porównaniu z kompozytem nienapromieniowanym. Stwierdzono, że promieniowanie gamma poprawia właściwości mechaniczne kompozytów, ale przy zastosowaniu nadmiernych dawek promieniowania właściwości te ulegają pogorszeniu.
Źródło:
Fibres & Textiles in Eastern Europe; 2019, 4 (136); 88-93
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Design of Ti-5Al-5Mo-5V-3Cr Elemental Powders Mixture Processing
Autorzy:
Zyguła, K.
Wojtaszek, M.
Powiązania:
https://bibliotekanauki.pl/articles/352015.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium alloy
powder metallurgy
microstructure
mechanical properties
compaction
Opis:
The aim of the study was to indicate the influence of consolidation processes on microstructure and selected mechanical properties of powder metallurgy Ti-5Al-5Mo-5V-3Cr alloy, which was produced by blending of elemental powders method. Morphology of the mixture and its ingredients were examined using scanning electron microscopy. The consolidation of powders mixture was conducted using two approaches. The first consisted of the uniaxial hot pressing process, the second included two steps – uniaxial cold pressing process and sintering under argon protective atmosphere. Microstructural analysis was performed for both as-pressed compacts using light microscopy. Additionally, computed tomography studies were carried out, in order to examine the internal structure of compacts. Chosen mechanical properties, such as Vickers hardness and compression strength was also determined and compared. The conducted research proves that the proposed production method leads to obtain materials with no structural defects and relatively low porosity. Moreover, due to the proper selection of manufacturing parameters, favorable microstructures can be received, as well as mechanical properties, which are comparable to conventionally produced material with the corresponding chemical composition.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 1; 283-289
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tests of Steel Rheological Properties at Higher Temperatures for Computer Simulation in Procast Software
Badania właściwosci wytrzymałościowych stali w podwyższonych temperaturach na potrzeby symulacji komputerowych w pakiecie ProCAST
Autorzy:
Sołek, K.
Dziarmagowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/355404.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
rheological model
tensile test
własności mechaniczne
model reologiczny
próba rozciągania
Opis:
This paper presents the tests of properties of selected steel grades conducted at higher temperatures. The findings of these mechanical tests are presented herein in graphs and in a table. They allow us to mathematically describe a change in the stress values depending on the change in strain within the plastic range in the tested steel grades. The obtained results may be used for identification of the elasticity modulus and for developing a flow stress model for numerical simulations of the steel continuous casting process.
W pracy przedstawiono badania właściwości wybranych gatunków stali w podwyższonych temperaturach. Wyniki przeprowadzonych badań wytrzymałościowych zostały przedstawione w pracy na wykresach i w tabeli. Pozwalają one na dokonanie matematycznego opisu wartości odkształcenia w zakresie plastycznym w zależności od zmiany wielkości stanu naprężenia w badanych gatunkach stali. Otrzymane wykresy mogą być użyte do identyfikacji modułu sprężystości i do opracowania modelu naprężenia uplastyczniającego wykorzystywanych w symulacjach numerycznych procesu ciągłego odlewania stali.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 4; 1463-1466
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ warunków przetwórstwa na właściwości kompozytu poliwęglanu napełnionego włóknem szklanym
The effect of processing on the mechanical properties of the polycarbonate composites with glass fiber
Autorzy:
Barczewski, M.
Szostak, M.
Ratajewski, M.
Tomaszewicz, K.
Stolicki, K.
Powiązania:
https://bibliotekanauki.pl/articles/278563.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
kompozyt polimerowy
poliwęglan
włókno szklane
właściwości mechaniczne
przetwórstwo tworzyw
wytłaczanie
wytłaczanie dwuślimakowe
wytłaczanie jednoślimakowe
polymer composite
polycarbonate
glass fibre
mechanical properties
polymer processing
extrusion
twin-screw extrusion
single-screw extrusion
Opis:
Celem przeprowadzonych badań było określenie wpływu przetwórstwa na właściwości mechaniczne kompozytu na osnowie poliwęglanu modyfikowanego włóknem szklanym. Kompozyt został poddany przetwórstwu dwiema metodami wytłaczania jedno oraz dwuślimakowego współbieżnego w celu otrzymania zróżnicowanych warunków obciążeń termomechanicznych. Wpływ warunków przetwórczych na właściwości wtryskiwanych wyrobów oceniono na podstawie przeprowadzonej próby statycznego rozciągania oraz udarności metodą DYNSTAT. Badania uzupełnione zostały o ocenę struktury kompozytów poddanych obciążeniom termomechanicznym za pomocą Skaningowej Mikroskopii Elektronowej (SEM).
The aim of the study was to determine the effect of processing on the mechanical properties of the polycarbonate composites with glass fiber. The composite material was processed by two various extrusion methods: one and twin-screw extrusion using in the secondmethod the co-extruder, in order to obtain different thermo-mechanical loading conditions. Influence of processing conditions on the properties of injection-molded products has been evaluated on the basis of static tensile and the DYNSTAT impact tests. Tests were supplemented by an assessment of structures of polycarbonate compositestreated by thermo-mechanical loads using the Scanning Electron Microscopy (SEM).
Źródło:
Przetwórstwo Tworzyw; 2014, [R.] 20, nr 5 (161), 5 (161); 381-385
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the notch for mechanical properties of 7020 aluminium alloy jointed by FSW
Autorzy:
Dudzik, K.
Czechowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/247552.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
aluminium alloys
friction stir welding (FSW)
mechanical properties
slow-strain-rate-testing
Opis:
The article presents the results of the mechanical properties of aluminum alloy AW 7020 [AlZn5Mgl] welded by friction s tir welding FSW. Friction Stir Welding (FSW) - a new technology can be successfully used for butt welding of different types of aluminum alloy sheets. In the article the parameters for friction stir welding of sheets made of AlZn5Mgl [7020] alloy were presented. Analysis of bonds showed a proper structural construction of the FSW welded 7020 aluminum alloy. The test was examined via the slow-strain-rate-testing (SSRT) according to ENISO 7539-7. The following parameters were measured: time-to-failure - T [min], obtained max. load - F [N]; strain energy (the diagram surface under the stress-elongation curve) - E [MJ/m3]; relative elongation of the specimen - A10 [%]; max. tensile stress - R [MPa] and contraction - Z [%]. The tests were carried out on cylindrical notch-free specimens and on specimens with "U"- notch in the air. Despite the use of "U" - notch cut in the joint, the specimens cracked in the native material. On the basis of test results were high strength properties of aluminum alloy 7020joints welded by FSW. Original values are received results of the mechanical properties of new method friction stir welded AW- 7020 [AlZn5Mgl] alloy.
Źródło:
Journal of KONES; 2010, 17, 4; 131-135
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The properties of AlZn5Mg1 (AW-7020) alloys welded by new technology friction stir welding
Własności złączy stopu AlZn5Mg1 zgrzewanych tarciowo nową technologią FSW
Autorzy:
Dudzik, K.
Czechowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/248082.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
stopy aluminium
zgrzewanie tarciowe z przemieszaniem materiału zgrzeiny (FSW)
korozja naprężeniowa
własności mechaniczne
próba odkształcania z małą prędkością
aluminium alloys
friction stir welding (FSW)
stress corrosion cracking
mechanical properties
slow-strain-rate-testing
Opis:
The results of examining mechanical properties and stress corrosion cracking (SCC) of aluminum alloy AW 7020 [AlZn5Mg1] by friction stir welded were presented. Friction Stir Welding (FSW) - a new technology can be successfully used for butt welding of different types of aluminum alloy sheets. In the article the parameters for friction stir welding of sheets made of AlZn5Mg1 [7020] alloy was presented. Metallographic analysis of bonds showed a proper structural construction of the friction stir welded 7020 aluminum alloys. Stress corrosion cracking was examined via the slow-strain-rate-testing (SSRT) according to EN ISO 7539-7. The following parameters were measured: time-to-failure - T [h], obtained max. load - F [N]; strain energy (the diagram surface under the stress-elongation curve) - E [MJ/m3]; relative elongation of the specimen - A10 [%]; max. tensile stress - R [MPa] and narrowing - Z [%]. The tests were carried out on cylindrical notch-free specimens in the air and 3.5% water solution NaCl. Good resistance to stress corrosion was found of friction stir welded 7020 aluminum alloys. The tested samples cracked during SSRT test in the native material. Original value is received results of the stress corrosion resistance of new method friction stir welded AlZn5Mg1 alloy.
W artykule przedstawiono wyniki badań własności mechanicznych oraz podatności na korozję naprężeniową złączy zgrzewanych tarciowo (FSW) stopu AW 7020 [AlZn5Mg1]. Nową technologię zgrzewania tarciowego z przemieszaniem materiału zgrzeiny FSW (Friction Stir Welding) można z powodzeniem stosować do zgrzewania doczołowego blach z różnego rodzaju stopów aluminium. Przedstawiono parametry zgrzewania tarciowego (FSW) zastosowane do połączenia blach ze stopuAlZn5Mg [7020]. Analiza metalograficzna wykazała poprawną budowę strukturalną złączy zgrzewanych stopu aluminium 7020. Badania korozji naprężeniowej wykonano stosując próbę odkształcenia z małą prędkością (10-6 s-1), zgodnie z PN-EN ISO 7539-7. Parametrami mierzonymi podczas badań były: czas do zniszczenia - T [h], uzyskane maksymalne obciążenie - F [N], energia odkształcenia (powierzchnia wykresu pod krzywą naprężenie-wydłużenie) - E [MJ/m3], wydłużenie względne próbki - A10 [%], maksymalne naprężenia rozciągające - R [MPa] oraz przewężenie - Z [%]. Badania wykonano na próbkach gładkich cylindrycznych w powietrzu oraz sztucznej wodzie morskiej. Na podstawie otrzymanych wyników badań stwierdzono dobrą odporność na korozję naprężeniową złącza stopu aluminium 7020 zgrzewanego metodą FSW. Oryginalnym osiągnięciem są otrzymane wyniki odporności na korozję naprężeniową złączy stopu AlZn5Mg1 zgrzewanych tarciowo nową metodą Friction Stir Welding.
Źródło:
Journal of KONES; 2008, 15, 3; 115-120
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Reliability of the Results of the Modified Low-cycle Fatigue Test for Cast Iron Evaluated by Metallographic Studies
Autorzy:
Maj, M.
Pietrzak, K.
Powiązania:
https://bibliotekanauki.pl/articles/379799.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
lamellar graphite
spheroidal graphite
low cycle fatigue test
mechanical properties
żeliwo
grafit płatkowy
grafit sferoidalny
zmęczenie niskocyklowe
właściwości mechaniczne
Opis:
This study discloses the characteristic features of the modified low-cycle fatigue test used for the determination of the mechanical properties of two types of cast iron, i.e. EN-GJL-250 and EN-GJS-600-3. For selected materials, metallographic studies were also conducted in the range of light microscopy and scanning microscopy.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 41-46
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tworzywa polichlorowinylowe modyfikowane napełniaczem ligninocelulozowo-mineralnym
Modification of polychlorovinyl plastics with lignocellulose-mineral fillers
Autorzy:
Piszczek, K.
Tomaszewska, J.
Skórczewska, K.
Lewandowski, K.
Mirowski, J.
Manikowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/278375.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
napełniacz lignocelulozowo-mineralny
poli(chlorek winylu)
PVC
kompozyty
właściwości przetwórcze
właściwości mechaniczne
lignocelluloses-mineral filler
poly(vinyl chloride)
composites
processing properties
mechanical properties
Opis:
W pracy przedstawiono analizę możliwości wykorzystania produktu ubocznego przemysłu meblarskiego jako napełniacza PVC. Omówiono sposób przygotowania napełniacza NLM i jego wpływ na właściwości przetwórcze i użytkowe PVC. Stwierdzono, że napełniacz NLM powoduje podobne skutki jak typowe napełniacze nieaktywne i może stanowić proekologiczną alternatywę dla powszechnie stosowanej kredy, także w produkcji rur elektroinstalacyjnych.
The paper presents an analysis of the possibility of using by-product from the furniture industry as the PVC filler. The method for preparing NLM filler and its effect on the processing and utility properties of PVC was presented. It was found that NLM filler causes similar effects as conventional inactive fillers and can provide eco-friendly alternative to the commonly used chalk, also in the production of pipes for electrical installation.
Źródło:
Przetwórstwo Tworzyw; 2016, T. 22, Nr 5 (173), 5 (173); 458-464
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical properties of Ni-Fe-Cu-P-B alloy produced by two component melt spinning (TCMS)
Autorzy:
Wojciechowska, M.
Ziewiec, K.
Kąc, S.
Prusik, K.
Powiązania:
https://bibliotekanauki.pl/articles/351728.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallic glasses
scanning electron microscopy (SEM)
nanoindentation
transmission electron microscopy TEM
mechanical properties
Opis:
The aim of this work was to investigate the microstructure and mechanical properties of the two-component melt-spun (TCMS) alloy produced from Ni40Fe40B20 and Ni70Cu10P20 melts. The Ni40Fe40B20, Ni70Cu10P20, Ni55 Fe20 Cu5 P10 B10 alloys were arc-melted. Then the alloys were melt-spun in the two different ways i.e.: by casting from a single-chamber crucible and from the two-chamber crucible. All of the above mentioned alloys were processed in the first way and the Ni40Fe40B20 and Ni70Cu10P20 were simultaneously cast on the copper roller from the two-chamber crucible. The microstructure of the alloy was studied using transmission electron microscopy (TEM), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS) and light microscopy. The mechanical properties were investigated using tensile testing and nanoindentation. The two-component melt-spun (TCMS) amorphous Ni55 Fe20 Cu5 P10 B10 alloy present hardness, tensile strength and Young modulus on the significantly higher level than for a single phase amorphous Ni55 Fe20 Cu5 P10 B10 alloy and slightly below the corresponding values for the Ni40Fe40B20.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 1; 137-140
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An influence of mechanical mixing and hot-pressing on properties of NiAl/Al2O3 composite
Wpływ mechanicznego mieszania oraz parametrów spiekania pod ciśnieniem na właściwości kompozytu NiAl/ Al2O3
Autorzy:
Kaliński, D.
Chmielewski, M.
Pietrzak, K.
Choręgiewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/354230.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
materiały konstrukcyjne
mieszanie
kompozyty
intermetallics
composite materials
mechanical mixing
hot pressing
mechanical properties
Opis:
Intermetallic phases of the Ni-Al type belong to the group of modern constructional materials which have numerous advantageous properties such as high melting temperature, low density, high resistance to high-temperature oxidation (to about 1200 degree Celsjus), high mechanical strength, high fatigue strength, and high tensile and compressive strength (also at elevated temperatures). Intermetallic compounds have however also drawbacks in that they are quite brittle at room temperature which makes their mechanical processing very difficult and restricts their application range. These drawbacks can be obviated by modifying their chemical composition. Improving the properties of NiAl-based materials can be achieved by creating the composite with the matrix made of an intermetallic phase NiAl reinforced with ceramic (Al2O3) particles. This paper is concerned with the mechanical and physical properties (bending strength, fracture toughness, hardness, and Young modulus) and also the microstructure of NiAl/Al2O3 composite. The composite materials were produced by the hot-pressed method using the NiAl/20%Al2O3 (vol.%) powder mixtures. The composite thus produced had a high density of about 99% of the theoretical value and a high bending strength. The bending strength of the NiAl/20vol.%Al2O3 composite was higher by about 80% (635 MPa) than that of the pure NiAl phase (345 MPa). The experiments included also the examination of the effect of the rotational speed of the mill and the duration of the mixing process upon the size and distribution of grains, the microstructure, and phase composition of the composite powder mixtures obtained.
Fazy międzymetaliczne typu Ni-Al należą do grupy nowoczesnych materiałów konstrukcyjnych, charakteryzujących się m.in: wysoką temperaturą topnienia, niską gęstością, wysoką odpornością na utlenianie w wysokich temperaturach (do około 1200 stopni Celsjusza), wysokim modułem sprężystości- stabilnym ze wzrostem temperatury, wysoka wytrzymałością, wysoką odpornością na ścieranie, wysoką wytrzymałością zmęczeniową, wysoką wytrzymałością na rozciąganie i ściskanie (również w wysokich temperaturach). Związki międzymetaliczne mają jednak wady, są dość kruche w temperaturze pokojowej - co znacznie utrudnia m.in. ich obróbkę mechaniczną i zawęża zakres zastosowań. Jednym ze sposobów wyeliminowania tych wad jest modyfikacja ich składu chemicznego. Poprawę właściwości materiałów na bazie NiAl można osiągnąć m.in. poprzez wytworzenie kompozytu na osnowie NiAl umocnionego cząsteczkami Al2O3. W artykule zaprezentowano wyniki prac dotyczących opracowania warunków procesu mechanicznego mieszania mieszanin proszków związek międzymetaliczny (NiAl) - ceramika (Al2O3), a następnie ich spiekania. Przyjęte parametry mieszania i spiekania pozwoliły otrzymać kompozyt charakteryzujący sie odpowiednia gęstością, bliską teoretycznej (99.9%) oraz wysoką wytrzymałością. Wytrzymałość na zginanie kompozytu NiAl/20%obj.Al2O3 była o 80% (635 MPa) wyższą od wytrzymałości czystej fazy NiAl (345 MPa).
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 3; 696-702
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrydowe biokompozyty polimerowe wzmocnione mikrowłóknami z łusek zbożowych i mączką drzewną
Hybrid biocomposites reinforced with fibres from grain by-products and softwood flour
Autorzy:
Urbaniak, M.
Błędzki, A. K.
Powiązania:
https://bibliotekanauki.pl/articles/278732.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
kompozyty polimerowe
biokompozyty hybrydowe
włókna naturalne
biożywica epoksydowa
właściwości mechaniczne
polymer composities
hybrid biocomposities
natural fibres
bio-based epoxy resin
mechanical properties
Opis:
Warunkiem zrównoważonego rozwoju gospodarczego jest ochrona środowiska naturalnego, zatem konieczne jest stosowanie eko-przyjaznych technologii i nowoczesnych materiałów, takich jak biokompozyty polimerowe zarówno termoplastyczne, jak i duroplastyczne wzmacniane włóknami naturalnymi. Biokompozyty te znajdują coraz szersze zastosowania inżynierskie. W artykule przedstawiono wyniki badań hybrydowych biokompozytów polimerowych na osnowie biożywicy epoksydowej wzmocnionych mikrowłóknami pozyskanymi z produktów ubocznych pochodzących z przemysłu rolno-spożywczego oraz z przemysłowej mączki drzewnej. Zastosowano mikrowłókna z łusek zbożowych - owsa i jęczmienia, które są dotychczas niezagospodarowanym racjonalnie odpadem przemysłu zbożowego, powstającymi podczas mielenia zbóż. Opracowane hybrydowe materiały kompozytowe wykazały wyższe właściwości wytrzymałościowe i użytkowe w stosunku do klasycznego kompozytu WPC i mogą stanowić jego przyjazną środowisku alternatywę.
Sustainable progress of economy is conditioned under environmental requirements then more extensive applications of eco-friendly technology and novel materials like polymer composites, both thermoplastic and thermosetting ones reinforced with natural fibres are needful. Such biocomposites are applicable widely in material engineering now. This article comprises the results of research on hybrid polymer biocomposites with bio-based epoxy resin reinforced with microfibres derived from grain by-products of agricultural industry or arised from industrial grade wood flour. Microfibres from grain husks of oat and barley as unutilized waste of milling industry were used. Manufactured hybrid composite materials showed improved mechanical and profitable properties compared to standard WPC composites and owing to that can be eco-friendly alternative for the latter.
Źródło:
Przetwórstwo Tworzyw; 2017, T. 23, Nr 5 (179), 5 (179); 458-465
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Characteristics of Ductile Iron Determined in an Original Modified Low Cycle test
Autorzy:
Maj, M.
Pietrzak, K.
Klasik, A.
Powiązania:
https://bibliotekanauki.pl/articles/379780.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
iron
mechanical properties
microstructure
żelazo
właściwości mechaniczne
mikrostruktura
Opis:
The results presented in this article are part of the research on fatigue life of various foundry alloys carried out in recent years in the Lukasiewicz Research Network – Institute of Precision Mechanics and AGH University of Science and Technology, Faculty of Foundry Engineering. The article discusses the test results obtained for the EN-GJS-600-3 cast iron in an original modified low-cycle fatigue test (MLCF), which seems to be a beneficial research tool allowing its users to evaluate the mechanical properties of materials with microstructural heterogeneities under both static and dynamic loads. For a comprehensive analysis of the mechanical behaviour with a focus on fatigue life of alloys, an original modified low cycle fatigue method (MLCF) adapted to the actually available test machine was used. The results of metallographic examinations carried out by light microscopy were also presented. From the analysis of the results of the conducted mechanical tests and structural examinations it follows that the MLCF method is fully applicable in a quick and economically justified assessment of the quality of ductile iron after normalizing treatment.
Źródło:
Archives of Foundry Engineering; 2019, 4; 27-32
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of solution treatment on the structure and mechanical and tribological properties of magnesium alloy WE54
Wpływ procesu przesycania na strukturę oraz właściwości mechaniczne i tribologiczne stopu magnezu WE54
Autorzy:
Barylski, A.
Aniołek, K.
Dworak, M.
Powiązania:
https://bibliotekanauki.pl/articles/190809.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
WE54
solution treatment
mechanical properties
wear
przesycanie
właściwości mechaniczne
zużycie
Opis:
The paper presents the influence of solution treatment on the mechanical and tribological properties of the WE54 magnesium alloy. The investigated alloy was solution treated at a temperature of 545oC for 8 hours and cooled in ice water (0oC), in room temperature water (20oC), and in hot water (95oC). Depending on the applied solution treatment parameters, a diversified decrease in hardness and Young's modulus was obtained. The lowest values of hardness H and modulus E were obtained when cooling in ice water. Abrasive wear of alloy WE54 was tested using a ball-on-disc tribometer (with a ZrO2 ball). The tests have shown more than a threefold reduction in the volumetric wear and a twofold reduction in the linear wear, as well as favourable changes of the friction coefficient (a 20% decrease) as compared to the material in the as received condition.
W pracy przedstawiono wpływ przesycania na właściwości mechaniczne i tribologiczne stopu magnezu WE54. Badany stop przesycano w temperaturze 545oC, w czasie 8 h, z chłodzeniem w wodzie z lodem (0oC), w wodzie o temperaturze pokojowej (20oC) i w wodzie gorącej (95oC). W zależności od zastosowanych parametrów procesu przesycania uzyskano zróżnicowany spadek twardości oraz modułu Younga. Najmniejsze wartości twardości H i modułu E uzyskano przy zastosowaniu chłodzenia w wodzie z lodem. Badania zużycia ściernego stopu WE54 przeprowadzono na tribometrze o skojarzeniu kula (ZrO2) – tarcza. Wykazano ponad 3-krotne ograniczenie zużycia objętościowego i 2-krotne zmniejszenie zużycia liniowego, korzystne zmiany odnotowano także w przypadku współczynnika tarcia (spadek o 20%) w stosunku do materiału w stanie dostawy.
Źródło:
Tribologia; 2016, 267, 3; 19-28
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies