Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "system machine vision" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
An autonomous monitoring system based on object shape detection
Autorzy:
Deniziak, S.
Michno, T.
Pięta, P.
Powiązania:
https://bibliotekanauki.pl/articles/114662.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
monitoring system
object identification
image retrieval
machine vision
Opis:
In traditional monitoring systems, stationary cameras are supervised only by a human operator, who may easily miss some events recorded by a camera. Because it is imperative for a surveillance system to be reliable, its autonomy can be extended by applying computer vision algorithms to a video signal and also by the use of mobile robots capable of monitoring tight and occluded areas. In this paper, we present an overview of the concept of an autonomous monitoring system based on object shape detection. Our goal is to develop a real-time system which robustly and efficiently identifies objects on the basis of their approximate shape. For monitoring the environment we use active and smart cameras capable of remote position control, as well as mobots equipped with video sensors. After performing the object extraction from individual video frames, each new detected object is decomposed into simple graphical primitives like lines, circles, rectangles etc. and then identified in a database using the Query by Shape (QS) method.
Źródło:
Measurement Automation Monitoring; 2015, 61, 7; 349-351
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System wizyjny do obrazowania położenia przestrzennego obiektu typu ostrosłup
Machine vision system for 3D positioning of pyramid
Autorzy:
Hirsch, P.
Rafiński, L.
Golijanek-Jędrzejczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/267197.pdf
Data publikacji:
2013
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
system wizyjny
pozycjonowanie 3d
machine vision
3d positioning
Opis:
W referacie przedstawiono system wizyjny, umożliwiający pomiar i wizualizację położenia ostrosłupa na scenie. System wykorzystuje stanowisko laboratoryjne Katedry Metrologii i Systemów Informacyjnych na Wydziale Elektrotechniki i Automatyki Politechniki Gdańskiej. Stanowisko pomiarowe składa się z następujących elementów: kamery cyfrowej wraz z obiektywem, wyposażonej w interfejs FireWire, zestawu oświetlaczy i komputera osobistego z zainstalowanym środowiskiem LabVIEW i pakietem Vision. Przedstawiono opis wyprowadzenia i realizacji algorytmu pozycjonowania, oraz wyniki testów systemu.
This paper presents a vision system used to measure and visualize the position of a pyramid on the stage. The system uses a laboratory stand at the Department of Metrology and Information Systems at the Faculty of Electrical and Control Engineering of the Technical University of Gdansk. The measurement system consists of the following components: a digital camera with equipped with a FireWire interface, a set of light sources and a PC running the LabVIEW environment and Vision package. Derivation and implementation of positioning algorithm has been presented. Test results are also included.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2013, 36; 69-74
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Real time trajectory correction system of optical head in laser welding
Autorzy:
Cieszyński, W.
Zięba, M.
Reiner, J.
Powiązania:
https://bibliotekanauki.pl/articles/386568.pdf
Data publikacji:
2015
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
control system
machine vision
image processing
laser welding
system sterowania
przetwarzanie obrazów
spawanie laserowe
system czasu rzeczywistego
Opis:
Application of laser welding technology requires that the laser beam is guided through the whole length of the joint with sufficiently high accuracy. This paper describes result of research on development of optomechatronic system that allows for the precise positioning of the laser head’s TCP point on the edge of welded elements during laser processing. The developed system allows for compensation of workpiece’s fixture inaccuracies, precast distortions and workpiece deformations occurring during the process.
Źródło:
Acta Mechanica et Automatica; 2015, 9, 4; 265-269
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A stereovision system for three-dimensional measurements of machines
Autorzy:
Grudziński, Marek
Marchewka, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/135398.pdf
Data publikacji:
2019
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
stereovision system
machine vision
camera tracking
camera calibration
calibration pattern
3D reconstruction
Opis:
The modern manufacturing or transportation machines that are used in industrial processes require continuous supervision in certain circumstances and even manual control by a human. Despite the fact the machines are more and more reliable and accurate than they used to be there is still the need for manual and time-consuming programming and safety control, especially when the external conditions change. For the operation of large machines, where the risk of damage and even disaster exists, an additional supervisory system based on vision devices could be utilized. The vision systems are commonly used in a range of simple 2D detection as well as very precise 3D reconstruction. The stereovision systems could be applied for unusual operations, especially in terms of safety and collision avoidance, such as crane observations while transporting a heavy load, robot and CNC machine preparation and normal operation. Through the use of optical devices the observed objects could be quickly positioned. In this research a test bench for stereovision reconstruction for the example of a robotic arm has been presented. The calibration procedures have been explained and accuracy tests in a large measuring volume were performed. Finally the possibilities of the applications and the utilization of such a system have been assessed.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2019, 58 (130); 16-23
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel method for 3D measurement of RFID multi-tag network using a machine vision system
Autorzy:
Zhuang, X.
Yu, X.
Zhao, Z.
Zhang, W.
Liu, Z.
Lu, D.
Dong, D.
Powiązania:
https://bibliotekanauki.pl/articles/221058.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
3D measurement
RFID multi-tag network
dual-CCD system
neural network
machine vision
Opis:
The three-dimensional (3D) coordinate measurement of radio frequency identification (RFID) multi-tag networks is one of the important issues in the field of RFID, which affects the reading performance of RFID multi-tag networks. In this paper, a novel method for 3D coordinate measurement of RFID multi-tag networks is proposed. A dual-CCD system (vertical and horizontal cameras) is used to obtain images of RFID multi-tag networks from different angles. The iterative threshold segmentation and the morphological filtering method are used to process the images. The template matching method is respectively used to determine the two-dimensional (2D) coordinate and the vertical coordinate of each tag. After that, the 3D coordinate of each tag is obtained. Finally, a back-propagation (BP) neural network is used to model the nonlinear relationship between the RFID multi-tag network and the corresponding reading distance. The BP neural network can predict the reading distances of unknown tag groups and find out the optimal distribution structure of the tag groups corresponding to the maximum reading distance. In the future work, the corresponding in-depth research on the neural network to adjust the distribution of tags will be done.
Źródło:
Metrology and Measurement Systems; 2018, 25, 3; 475-486
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie charakterystyk pracy impulsowej wysoko wydajnych diod elektroluminescencyjnych
The determination of characteristics of highly-efficient LED diodes impulse work
Autorzy:
Czajka, P.
Powiązania:
https://bibliotekanauki.pl/articles/257310.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
system oświetlenia
widzenie maszynowe
oświetlacz impulsowy
proces dynamiczny
lighting system
machine vision
impulse lighting illuminators
dynamic process
Opis:
Automatyczna optyczna inspekcja w wielu procesach wymaga stosowania oświetlaczy, które są w stanie w bardzo krótkim czasie zapewnić wysoką wartość natężenia światła. Jednym z rozwiązań jest zastosowanie oświetlaczy diodowych w warunkach pracy impulsowej z chwilowym przekroczeniem nominalnych parametrów prądowych diod LED. Coraz częściej w systemach oświetlenia stosowane są wysoko wydajne diody LED, o mocach rzędu kilku watów. Przedmiotem badań był wpływ natężenia prądu i długości impulsu na wartość i stabilność natężenia światła diody w impulsie. Badania przeprowadzono dla diod Luxeon światła białego o mocach 1, 3 i 5 W. Wyniki badań mogą być wykorzystane przy projektowaniu oświetlaczy i ich sterowników.
Automatic optical inspection in many processes demands the application of lighting illuminators, which are able to ensure high value intensity of illumination in a very short time. One of solutions is the application of LED lighting illuminators in impulse work conditions with temporary crossing border parameters of current diodes LED. Highly-efficient LED diodes with the power of several watts are more and more often used in lighting systems. The topic of research was the influence of current intensity and impulse length on the value and uniformity of the illumination diode intensity in impulse. Research was conducted for Luxeon diodes with white light and power of 1, 3 and 5 watts. Research results can be used in the course of designing lighting illuminators and their controllers.
Źródło:
Problemy Eksploatacji; 2008, 2; 33-44
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatic non-destructive quality inspection system for oil palm fruits
Autorzy:
Makky, M.
Soni, P.
Salokhe, V.M.
Powiązania:
https://bibliotekanauki.pl/articles/24184.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
non-destructive quality
inspection system
fruit
African oil palm
quality inspection
fresh fruit
bunch
machine vision
Opis:
In this research a non-destructive, rapid and cost effective examination machine for the estimation of the ripeness fraction, oil content and free fatty acid level in oil palm fresh fruits bunch was developed. The automatic machine-vision based in- spection system provided consistency, rapid estimation and accep- table accuracy results in non-dest ructive manner. Fresh fruits bunch samples from Tenera cultivar (7 to 20 years trees) were taken from Cimulang plantation, Bogor, Indonesia. Two statistical analysis methods were used: a forward stepwise multiple linear regression analysis and a multilayer-perceptron artificial neural network analysis. The best prediction of ripeness and oil content models were obtained using the latter method, while the best free fatty acid prediction model was developed by the first method. The models were then employed in the machine-vision inspection systems of the machine. The system best prediction accuracy of ripeness, oil content and free fatty acid models was 93.5, 96.41, and 89.32%, with standard error of prediction being 0.065, 0.044 and 0.068, respectively. The system was tested through a series of field tests, and successfully examined more than 12 t of fruits bunch per hour, without causing damage.
Źródło:
International Agrophysics; 2014, 28, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Features of the implementation of computer vision in the problems of automated product quality contro
Cechy implementacji wizji komputerowej w problemach automatycznej kontroli jakości produktów
Autorzy:
Stelmakh, Nataliia
Mastenko, Ihor
Sulima, Olga
Rudyk, Tetiana
Powiązania:
https://bibliotekanauki.pl/articles/27315380.pdf
Data publikacji:
2023
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
machine vision
intelligent technological system
quality control
neural networks
wizja maszynowa
inteligentne systemy technologiczne
kontrola jakości
sieci neuronowe
Opis:
The article analyzes the fields of application of machine vision. Special attention is focused on the application of Machine Vision in intelligent technological systems for product quality control. An important aspect is a quick and effective analysis of product quality directly at the stage of the technological process with high accuracy in determining product defects. The appropriateness and perspective of using the mathematical apparatus of artificial neural networks for the development of an intelligent technological system for monitoring the geometric state of products have been demonstrated. The purpose of this study is focused on the identification and classification of reed tuber quality parameters. For this purpose, new methods of identification and classification of quality control of various types of defects using computer vision and machine learning algorithms were proposed.
W artykule dokonano analizy obszarów zastosowań widzenia maszynowego. Szczególną uwagę zwrócono na zastosowanie widzenia maszynowego w inteligentnych systemach technologicznych kontroli jakości wyrobów. Ważnym aspektem jest szybka i skuteczna analiza jakości produktu bezpośrednio na etapie procesu technologicznego z dużą dokładnością w określaniu wad produktu. Pokazano celowość i perspektywę wykorzystania aparatu matematycznego sztucznych sieci neuronowych do budowy inteligentnego systemu technologicznego do monitorowania stanu geometrycznego wyrobów. Celem badań jest identyfikacja i klasyfikacja parametrów jakościowych rurek trzcinowych. W tym celu zaproponowano nowe metody identyfikacji i klasyfikacji kontroli jakości różnego rodzaju defektów z wykorzystaniem wizji komputerowej i algorytmów uczenia maszynowego.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2023, 13, 1; 38--41
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stanowisko laboratoryjne do badań algorytmów sterowania robotami mobilnymi z wizyjnym sprzężeniem zwrotnym
Laboratory Station for Studying Visual Feedback Control Systems for Mobile Robots
Autorzy:
Figurowski, D.
Brasel, M.
Kubicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/277632.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
roboty mobilne
pojazdy kołowe
system wizyjny
analiza obrazów 2D
stanowisko laboratoryjne
mobile robots
wheeled vehicles
machine vision
2D image analysis
laboratory station
Opis:
W artykule poruszono tematykę związaną z opracowaniem platformy badawczo-dydaktycznej przeznaczonej dla robotów mobilnych. Omawiane stanowisko zostało zbudowane na Wydziale Elektrycznym Zachodniopomorskiego Uniwersytetu Technologicznego w Szczecinie jako platforma przeznaczona do projektowania i testowania algorytmów sterowania z wizyjnym sprzężeniem zwrotnym. W artykule poruszono przyczyny budowy takiej platformy wraz z odniesieniem się do istniejących rozwiązań, które powstały w innych ośrodkach badawczych. W dalszej części opisano wymagania postawione opracowanej platformie, a także omówiono konstrukcję prototypu platformy, zastosowane roboty mobilne oraz komponenty sprzętowe systemu. Następnie poruszono zagadnienie wizji maszynowej oraz przedstawiono opracowany algorytm analizy obrazu 2D. Artykuł kończy się podsumowaniem, w którym zamieszczono perspektywę rozwoju stanowiska oraz zarysowano plan wykorzystania opracowanej platformy do badań naukowych, jak i celów dydaktycznych.
The article presents the development of an academic platform dedicated to mobile robots. This stand was built in West Pomeranian University of Technology in Szczecin as a platform on which control systems with visual feedback could be devised and tested. In the article a motivation for such station was presented with acknowledging already existing solutions developed by other research groups. Further, platform requirements were presented as well as its construction, mobile robots and hardware components. A general outline of the machine vision problem is given, as well as a detailed description of a 2D image analysis algorithm devised for the designed platform. The article ends with a summary in which a concept of using the platform for research and didactics is given as well as its further development.
Źródło:
Pomiary Automatyka Robotyka; 2016, 20, 3; 71-76
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zautomatyzowany system kontroli wizyjnej tabletek i kapsułek pakowanych w przezroczyste blistry
Automated optical system for tablets and capsules packaging inspection
Autorzy:
Zając, J.
Małkiński, W.
Wójcik, J.
Karliński, M.
Powiązania:
https://bibliotekanauki.pl/articles/256633.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
wizja maszynowa
inspekcja optyczna
przetwarzanie obrazu
analiza obrazu
inspekcja pakowania
tabletka
kapsułka
system zarządzania jakością
machine vision
optical inspection
image processing
image analysis
tablet
capsule
packaging inspection
quality management system
Opis:
W artykule przedstawiono charakterystykę zautomatyzowanego systemu przeznaczonego do kontroli wizyjnej tabletek i kapsułek pakowanych w przezroczyste blistry. Inspekcja jakości pakowania obejmuje: wykrywanie braku tabletek w gnieździe lub ich nieprawidłowe ułożenie, wykrywanie tabletek o niewłaściwym kolorze lub wymiarach, wykrywanie zanieczyszczeń blistra oraz sprawdzenie prawidłowości oznakowania blistra. Omówiono właściwości podstawowych składników sprzętowych systemu. Zaprezentowano moduły programowe związane z projektowaniem nastaw systemu, tworzeniem nowych zadań inspekcji, a także wizualizacją przebiegu inspekcji w trybie automatycznym. Przedstawiono właściwości i parametry techniczne systemu. Opracowany system umożliwia pełną archiwizację nastaw oraz wyników inspekcji.
The system described in the paper provides automated optical inspection of tablets and capsules packed in transparent blisters. The packaging inspection includes: detection of tablets/capsules presence in nests, detection of improper position of tablets, detection of tablets which have improper color or size, detection of blister contaminations, and marking inspection of blisters. Features of basic hardware components of the system are discussed. Software modules related to projects of system settings, creation of new inspection tasks and visualization of the inspection stream in automatic mode are presented as well. Main features and technical data of the system are described. The system also assures the possibility of full archiving of the inspection settings and results.
Źródło:
Problemy Eksploatacji; 2009, 1; 197-208
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies