Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "laser-plasma" wg kryterium: Temat


Wyświetlanie 1-4 z 4
Tytuł:
Post-acceleration of ions from the laser-generated plasma
Autorzy:
Giuffrida, L.
Torrisi, L.
Powiązania:
https://bibliotekanauki.pl/articles/146664.pdf
Data publikacji:
2011
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
laser ablation
laser-plasma
post-acceleration
ion implantation
Rutherford backscattering spectrometry (RBS) analysis
Opis:
An application of the laser-generated plasma for multi-energetic ion implantation is reported. In an experiment performed at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud (INFN-LNS) of Catania, Italy the Nd:YAG laser was used, operating at the 1064 nm wavelength with the intensity of 1010 W/cm2. A laser pulse of 9 ns duration and 300 mJ energy was employed to ablate a solid target placed in a high vacuum. The free ion expansion occurred in a constant potential chamber placed at 30 kV positive voltage with respect to the ground, which allowed to extract ions with energy proportional to the charge state. In an another experiment, performed at the PALS Prague laser facility (1315 nm, 400 ps pulse width and the laser pulse energy delivered on target equal to about 35 J) Ti ions were obtained through the ablation of solid targets in vacuum by means of 1015 W/cm2 laser pulses. In both cases ion energy analyzers were used to measure the energy-to-charge ratio of the ions. The ion energy distribution was determined from the time-of-flight measurements. The depth profiles measured through Rutherford backscattering spectrometry (RBS) analysis are in good agreement with the ion energy analyzer spectroscopy measurements.
Źródło:
Nukleonika; 2011, 56, 2; 161-163
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laser ablated carbon plume : experiment and modelling
Autorzy:
Moscicki, T.
Hoffman, J.
Szymanski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/146429.pdf
Data publikacji:
2012
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
laser ablation
plasma plume
Opis:
Laser ablation of graphite is studied both theoretically and experimentally. Plasma temperature and electron density in the early phase of expansion into vacuum are measured as a function of distance from the target. The experimental results agree well with the theoretical simulations. The simulation of ablation shows that plasma plume considerably affects the ablation rate.
Źródło:
Nukleonika; 2012, 57, 2; 283-286
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optymalizacja parametrów pracy aparatury pomiarowej w analizie pierwiastkowej tkanek miękkich techniką ablacji laserowej z detekcją w spektrometrze mas z plazmą sprzężoną indukcyjnie
Optimization of operating parameters of the measuring apparatus in elemental analysis of soft tissues using laser ablation technique with the detection in the mass spectrometer with inductively coupled plasma
Autorzy:
Lorenc, W.
Barałkiewicz, D.
Powiązania:
https://bibliotekanauki.pl/articles/134863.pdf
Data publikacji:
2016
Wydawca:
ADVSEO
Tematy:
laser ablation
inductively coupled plasma mass spectrometry
optimization of operating parameters of instruments
soft tissue
Opis:
Operating parameters of measurement equipment for the laser ablation of detection in the mass spectrometer with inductively coupled plasma were optimized. Optimization was employed in order to choose the conditions for carrying analyzes to ensure high analytical signal intensities and low values of relative standard deviation. Optimization was performed on a model sample with physicochemical properties similar to those of real samples of soft tissue. The following parameters underwent optimization: the energy of the laser pulse frequency, beam diameter and scanning speed. The selection of the optimal operating parameters was determined based on the intensity of the signal analysis, RSD value and visual evaluation of the process of ablation. Measurements were made using a quadrupole ICP-MS spectrometer (Elan DRC II PerkinElmer) with a laser ablation system (LSX-500 Cetac).
Źródło:
Technical Issues; 2016, 3; 67-73
2392-3954
Pojawia się w:
Technical Issues
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Supertwarde warstwy W-B i W-Ti-B osadzane z tarcz spiekanych metodą SPS
Super-hard films W-B and W-Ti-B deposited from targets sintered by SPS method
Autorzy:
Psiuk, Rafał
Słomińska, Hanna
Hoffman, Jacek
Mościcki, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/211903.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Obróbki Plastycznej
Tematy:
ablacja laserowa
borki wolframu domieszkowane tytanem
spiekanie plazmowe
laser ablation
tungsten borides doped titanium
plasma sintering
Opis:
Z rosnącym zapotrzebowaniem na niezawodne, a jednocześnie zapewniające dużą wydajność, narzędzia do skrawania i obróbki plastycznej, coraz większego znaczenia nabiera rozszerzająca się grupa supertwardych ceramik przewodzących prąd. Mate-riały te dobrze rokują w związku z rozwiązaniem problemów tradycyjnych materiałów narzędziowych, których niedoskonałości obejmują wysoką cenę (azotek krzemu, azotek boru), niezdolność do cięcia stopów żelaza w wyniku reakcji chemicznych (diament), niestabilność w obecności wilgoci (azotek boru) i względnie małą twardość (węglik wolframu). Również rosnący popyt na powłoki ochronne o wysokiej twardości, o dob-rych właściwościach sprężystych i stabilności termicznej powoduje, że badania nad nowymi systemami materiałowymi prowadzone są coraz intensywniej. Pomimo że azotki metali przejściowych są już z powodzeniem stosowane do różnych zadań w prze-myśle samochodowym i lotniczym, poszukiwanie ulepszonych materiałów jest tematem wciąż aktualnym. W pracy przedstawiono badania nad osadzaniem cienkich powłok z nowych supertwardych materiałów (SHM), którymi są borki wolframu. Dodatkowo zbadano wpływ domieszkowania tych materiałów tytanem. Warstwy osadzane były metodą ablacji laserowej PLD. Tarcze do osadzania zsyntetyzowane zostały metodą spiekania plazmowego SPS proszków boru i wolframu o stosunku atomów 4,5 do 1. Osadzane z użyciem lasera warstwy mają skład stechiometryczny podobny do użytych tarcz. W warstwach tych dominuje faza WB3. Badania przeprowadzone z użyciem SEM, XRD i nanoindentacji wykazały, że skład fazowy tarcz jest odwzorowany w war-stwach osadzonych laserem. Wszystkie uzyskane warstwy są bardzo twarde i stabilne termicznie. Warstwy osadzane laserem odznaczają się dużą chropowatością. Domiesz-kowanie tytanem zwiększa ilość fazy WB3 w spiekanych tarczach i osadzanych war-stwach oraz zmniejsza ilość i wielkość naniesionych na powierzchnię cząstek.
With increasing demand for high-performance and long-lasting cutting and forming tools, the members of this expanding class of superhard metals hold promise to address the shortcomings of traditional tool materials. Those shortcoming include their high cost (silicon nitride, cubic boron nitride, and diamond), their inability to cut ferrous metals due to chemical reactions (diamond), instability in the presence of humidity (cubic boron nitride) and relatively low hardness (tungsten carbide). Also the increasing industrial demand for protective coatings with high hardness, good elastic properties and thermal stability calls for the investigation of new material systems. Although transition metal (TM) nitrides are successfully applied for different tasks in automotive or aero-space industries, the search for improved materials is an ongoing topic, being far from its end. In this work the study on deposition of thin films made of new super-hard materials (SHM) such as tungsten boride are presented. Additionally, the influence of doping by titanium of those materials is investigated. Investigated films were deposited by the pul-sed laser deposition method. The used targets were synthetized by SPS method. The powders of boron and tungsten in 4.5 to 1 molar faction were used. The films deposited by PLD method have stoichiometric composition such as used targets. The WB2 and WB3 phase are dominant. Research carried out using SEM, XRD and nanoindentation test showed that the phase composition of the targets is more important in the case of laser deposition than magnetron. All obtained layers are very hard and thermally stable. In the case of magnetron sputtering, smooth layers were obtained while the layers depo-sited by the laser have a very high roughness. Titanium doping increases the amount of WB3 phase in the sintered discs, while it has no significant effect on the properties of the deposited layers.
Źródło:
Obróbka Plastyczna Metali; 2019, 30, 2; 107-120
0867-2628
Pojawia się w:
Obróbka Plastyczna Metali
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies