Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "kaolin" wg kryterium: Temat


Tytuł:
Development of kaolin production, reserves and processing in the Czech Republic in 1999–2015
Zasoby, produkcja i przeróbka kaolinu w Republice Czeskiej w latach 1999−2015
Autorzy:
Starý, J.
Pticen, F.
Jirásek, J.
Sivek, M.
Powiązania:
https://bibliotekanauki.pl/articles/216077.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
kaolin
beneficiated kaolin
processing
reserves
resources
wzbogacony kaolin
zasoby kaolinu
bogactwo mineralne
Opis:
This paper aims to characterize and interpret the trends in reserves, resources, and in the mine production of crude kaolin and output of beneficiated kaolin between 1999 and 2015 in the Czech Republic. With nearly 1.2 billion tonnes of total resources, kaolin belongs to the key industrial minerals of the Czech Republic. With an annual output of about 3 to 4 million tonnes of crude kaolin and of around 0.6 million tonnes of beneficiated kaolin, the Czech Republic ranks among the top European and world kaolin producers. Mine production of crude kaolin has been relatively stable since 1997, while the output of beneficiated kaolin has been increasing gradually during the same period. The increased production and yield of beneficiated kaolin resulted from the use of progressive methods in kaolin processing, primarily high-intensity electromagnetic separation. The positive growth trend was not a reflection of the stability of the extractive sector and domestic industry, but it was the result of a pro-export orientation. The amount and share of exports are continuously increasing and constitute 80% of the entire kaolin production sector at the present time. The only exception occurred in 2005–2008, when exports declined by one-half as a result of the government´s export restrictions. The results of analyses were not optimistic for the Czech economy and indicated a sharp downturn in the domestic mining industry. Moreover, a similar situation exists in the case of other essential industrial minerals such as feldspar, clays, and silica sand.
W artykule dokonano charakterystyki i interpretacji trendów dotyczących zasobów, produkcji surowego oraz wzbogaconego kaolinu w Republice Czeskiej w latach 1999−2015. Zasoby kaolinu szacowane są na około 1,2 mld ton i należą do najważniejszych przemysłowych surowców mineralnych Republiki Czeskiej. Z roczną produkcją około 3−4 mln ton surowego kaolinu i około 0,6 mln ton wzbogaconego kaolinu, Czechy należą do czołowych europejskich i światowych producentów kaolinu. Wydobycie surowego kaolinu jest stosunkowo stabilne od 1997 r., natomiast produkcja wzbogaconego kaolinu stopniowo wzrasta. Rosnąca produkcja i coraz lepsza jakość kaolinu wzbogaconego wynika z zastosowania zaawansowanych metod przeróbki, głównie separacji elektromagnetycznej. Ten wzrost nie był odzwierciedleniem stabilności sektora wydobywczego i krajowego przemysłu, ale wiązał się z działalnością proeksportową. Wielkość eksportu i jego udział stale rośnie i stanowi obecnie 80% łącznej krajowej produkcji kaolinu. Jedyny wyjątek miał miejsce w latach 2005−2008, kiedy eksport spadł o połowę w wyniku rządowych ograniczeń eksportu. Wyniki analiz nie były optymistyczne dla czeskiej gospodarki i wskazywały na gwałtowny spadek produkcji krajowego przemysłu górniczego. Ponadto podobna sytuacja występuje w przypadku innych, istotnych przemysłowych surowców mineralnych , takich jak: skaleń, iły i piasek krzemionkowy.
Źródło:
Gospodarka Surowcami Mineralnymi; 2017, 33, 3; 121-142
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic neutron radiography studies of drying of kaolin clay cylinders
Autorzy:
Fijał-Kirejczyk, I.
Milczarek, J. J.
Banaszak, J.
Trzciński, A.
Żołądek, J.
Powiązania:
https://bibliotekanauki.pl/articles/148084.pdf
Data publikacji:
2009
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
drying
kaolin
neutron radiography
Opis:
The results of neutron radiography studies on convective drying of kaolin cylinders are presented. The sample shrinkage and loss of water during drying was easily observed on registered neutron radiograms. The saturation of the sample with water was estimated in terms of the neutron effective macroscopic cross-section. The results are comparable to those of gravimetric measurements and are discussed within the framework of simple theories of drying. The effect of the scattered neutrons is discussed in terms of the results of the MC simulations.
Źródło:
Nukleonika; 2009, 54, 2; 123-128
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of acid leaching on halloysite
Autorzy:
Saklar, S.
Yorukoglu, A.
Powiązania:
https://bibliotekanauki.pl/articles/109697.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
halloysite
kaolin
leaching
dehydration
characterization
Opis:
A characteristic iron-containing halloysite sample from Turkey was subjected to acid leaching using organic and inorganic acids for removing iron impurities. The aim of this study was to compare the raw hydrated and dehydrated halloysites with the leached products. Hydrochloric acid and oxalic acid were chosen as leaching agents for the removal of iron impurities at 80 °C for 2.5 h. The physicochemical properties of the acid-treated halloysite were analyzed by XRF, XRD, FTIR, TGA, DTA, SEM, and TEM. The XRF results showed that the acid treatment caused the dissolution of minor amounts of Al3+ ions from the clay layer. The XRD results indicated that the crystalline structure was unchanged after the leaching. However, it was observed that the hydrated (1 nm) halloysite readily lost its interlayer water and was transformed to the dehydrated (0.7 nm) form. In addition, no visible effects of the acid treatment on the tubular structure of halloysite were detected in the SEM and TEM images. Typical pores of varying dimensions were observed in all of the samples regardless of their form or treatment. Furthermore, the TG-DTA and FTIR analysis results were similar for both the raw and the acid-treated samples.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 83-94
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of Geopolymer Concrete for Underwater Concreting Properties
Autorzy:
Zaidi, Fakhryna Hannanee Ahmad
Ahmad, Romisuhani
Al Bakri Abdullah, Mohd Mustafa
Wan Ibrahim, Wan Mastura
Aziz, Ikmal Hakem
Junaidi, Subaer
Luhar, Salmabanu
Powiązania:
https://bibliotekanauki.pl/articles/2106595.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
geopolymer
underwater concrete
fly ash
kaolin
Opis:
For ages, concrete has been used to construct underwater structures. Concrete laying underwater is a very complex procedure important to the success or failure of underwater projects. This paper elucidates the influence of alkali activator ratios on geopolymers for underwater concreting; focusing on the geopolymer concrete synthesized from fly ash and kaolin activated using sodium hydroxide and sodium silicate solutions. The geopolymer mixtures were designed to incorporate multiple alkali activator ratios to evaluate their effects on the resulting geopolymers’ properties. The fresh concrete was molded into 50 mm cubes in seawater using the tremie method and tested for its engineering properties at 7 and 28 days (curing). The control geopolymer and underwater geopolymers’ mechanical properties, such as compressive strength, water absorption density, and setting time were also determined. The differences between the control geopolymer and underwater geopolymer were determined using phase analysis and functional group analysis. The results show that the geopolymer samples were optimally strengthened at a 2.5 alkali activator ratio, and the mechanical properties of the control geopolymer exceeded that of the underwater geopolymer. However, the underwater geopolymer was determined to be suitable for use as underwater concreting material as it retains 70% strength of the control geopolymer.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 2; 677--684
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermodynamic analysis of the influence of potassium on the thermal behavior of kaolin raw material
Autorzy:
Hernández-Chávez, Macaria
Vargas-Ramírez, Marissa
Herrera-González, Ana Maria
García-Serrano, Jesús
Cruz-Ramírez, Alejandro
Romero-Serrano, José Antonio
Sánchez-Alvarado, Ricardo Gerardo
Powiązania:
https://bibliotekanauki.pl/articles/1448343.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
kaolin
thermal treatment
thermodynamic analysis
viscosity
Opis:
The mineralogy and thermal properties of two kaolin clay samples from Agua Blanca (Hidalgo-México) were determined by XRD, SEM-EDS, TGA-DSC techniques. Kaolin clay A contains a higher $Al_2O_3$ and lower impurities $(K_2O, TiO_2, Fe_2O_3)$ amount than kaolin clay B, while the SiO2 amount is similar for both kaolin clays. A theoretical approach was carried out by a thermodynamic analysis considering the chemical composition of both kaolin clay samples with the FactSage 7.3 software. Stability phase diagrams were obtained to different K2O content from 0.1 to 3 wt % and temperatures in the range from 600 to 1600°C based on the chemical composition of the kaolin clay samples. The main mineralogical compounds predicted are andalusite $(Al_2O_3•SiO_2)$, K-Potash feldspar $(K_2O•Al_2O_3•6SiO_2)$, and the $SiO_2$ polymorphs (quartz, tridymite, and cristobalite) with small amounts of ferric-pseudobrookite $(Fe_2O_5Ti)$, and rutile $(TiO_2)$. As $K_2O$ content is increased, the amounts of mullite and tridymite decrease meanwhile the potash feld spar is increased at high temperatures. A liquid phase is formed at around 1350 and 1400°C for the kaolin clay samples A and B, respectively. The viscosity of the melt is increased for the evaluated $K_2O$ additions to 1400, 1500, and 1600°C.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 1; 39-52
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Composition on Melt Flow and Density of Polypropylene Copolymer/Kaolin Geo-Filler Composites
Autorzy:
Zulkifli, Zulaikha
Daud, Yusrina Mat
Zainal, Farah Farhana
Hashim, Mohammad Firdaus Abu
Aygörmez, Yurdakul
Powiązania:
https://bibliotekanauki.pl/articles/2203755.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
geo-filler
kaolin
composites
polypropylene
rheological
Opis:
This study examined the effects rheological properties of different composition kaolin and kaolin geo-filler in polypropylene composites. Polypropylene composites with varying composition of kaolin geo-filler 0 wt%, 2 wt%, 4 wt%, 6 wt%, 8 wt%, and 10 wt% was prepared and compared with polypropylene composite with raw kaolin. Kaolin is an aluminosilicate based mineral filler was used to prepare geopolymer paste by combining with alkaline activator solution. The polypropylene composite was compounded using a twin-screw extruder and the melt flow index was determined by a constant weight pressure of 2.16 kg at 230°C in 10 min. Knowing the melt flow index is necessary to predict and control the process, the study has demonstrated that the composition of kaolin filler and kaolin geo-filler affects the melt flow, melt density and surface morphology at varies composition. Composites with kaolin geo-filler have demonstrated high melt flow index process and having better distribution and flow.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 369--373
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ewolucja wykorzystania wypełniaczy mineralnych w przemyśle papierniczym
The evolution of the utilization of mineral fillers in the paper industry
Autorzy:
Lewicka, E.
Powiązania:
https://bibliotekanauki.pl/articles/394374.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
GCC
PCC
kaolin
przemysł papierniczy
paper industry
Opis:
Wypełniacze mineralne są wykorzystywane głównie w produkcji papierów określanych łącznie jako drukowe i do pisania w celu poprawy ich właściwości optycznych i podatności na drukowanie. Ich podstawowym zadaniem jest zastąpienie części kosztownych włókien roślinnych (celulozowych) i przez to obniżenie kosztów produkcji papieru. Przez wiele lat jedyną metodą formowania papieru była metoda kwasowa, a surowcem dominującym w wypełnianiu papieru i tektury oraz ich powlekaniu pigmentowym był kaolin. Na początku lat 70. ubiegłego wieku w Europie Zachodniej stanowił on 80% stosowanych wypełniaczy i 94% – gatunków kryjących, a w USA – odpowiednio 92 i 96%. Wdrożenie nowych metod formowania papieru w środowisku obojętnym lub słabo zasadowym (alkalicznym) spowodowało znaczne ograniczenie stosowania kaolinu na rzecz konkurencyjnych cenowo pigmentów węglanowych: mielonego węglanu wapnia (GCC – Ground Calcium Carbonate) i strącanego węglanu wapnia (PCC – Precipitated Calcium Carbonate). Przyczynił się do tego również fakt postępującej autodestrukcji kwaśnych papierów produkcji maszynowej. W 2013 r. udział wypełniaczy węglanowych w łącznej światowej podaży osiągnął 83%, podczas gdy na kaolin przypadało 10%, a na talk – 7%. Artykuł omawia właściwości podstawowych wypełniaczy stosowanych w przemyśle papierniczym oraz powody ich wykorzystania w produkcji określonych gatunków papieru. Kaolin, ze względu na płytkowy pokrój ziaren jego głównego składnika mineralnego – kaolinitu, jest preferowany w wielokrotnym powlekaniu papieru. Za wyborem GCC przemawia jego cena i właściwości (zwłaszcza białość), podczas gdy PCC, dzięki możliwości modyfikacji kształtu i wielkości cząstek, służy jako wypełniacz w papierach niepowlekanych, w przypadku których kluczowe znaczenie ma jasność i nieprzezroczystość. Rozkład ziarnowy stanowi główną różnicę pomiędzy wypełniaczami węglanowymi PCC i GCC. Artykuł przedstawia także tendencje obserwowane w ostatnich kilkunastu latach na rynku papierniczym w Polsce. Należą do nich: rosnące zapotrzebowanie na papiery i tektury powlekane do produkcji opakowań, a także kurczące się zapotrzebowanie na papier gazetowy, co jest konsekwencją postępującej digitalizacji i cyfryzacji.
Mineral fillers are mainly utilized in the production of printing and writing papers (P&W) to improve their optical features and their vulnerability to printing. With the high cost of pulp, the aim of their introduction has been to 102 increase mineral loading in paper and reduce the overall cost of production. For many years the only method of paper formation was acid technology, while the only raw material of choice for filling and coating paper and cardboard was kaolin (in the beginning of the 1970s it was 80% of fillers and 94% of coating grades used in Western Europe, while in the USA – 92% and 96%, respectively). The onset on new methods of acid-free (alkaline) paper forming caused a drastic reduction in the kaolin demand for cost-competitive calcium carbonate: GCC – Ground Calcium Carbonate) and PCC – Precipitated Calcium Carbonate. This also resulted from the progressive self-destruction of machine-made acid papers. In 2013, the share of calcium carbonate in the total production of fillers was 83%, while kaolin accounted for 10%, and talc – 7%. The article presents the parameters of principal mineral fillers for the paper industry and the main reasons why they are suitable for particular kinds of paper. Kaolin, due to the platy nature of its main mineral constituent – kaolinite, is preferred in multiple coating papers. The choice of GCC is beneficial because of its low price and properties (especially whiteness). PCC, due to the possibility of shape and particle size modification serves as filler in uncoated woodfree papers, the key features of which are expected to be lightness and opacity. Size distribution is the main difference between PCC and GCC. The article also presents tendencies observed over the last several years in the paper market in Poland, i.e. in a significant growth in coated paper and board for packaging, as well as the decreasing demand for newspaper, which is a consequence of progressive digitalization.
Źródło:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN; 2018, 106; 101-110
2080-0819
Pojawia się w:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chemical treatment of kaolin. Case study of kaolin from the Tamazert– Jijel mine
Autorzy:
Chouafa, M.
Idres, A.
Bouhedja, A.
Talhi, K.
Powiązania:
https://bibliotekanauki.pl/articles/89198.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
kaolin
hydrochloric acid
sulfuric acid
acetic acide
Opis:
The Tamazert-Jijel kaolin deposit is located in eastern Algeria, It was formed during a process of hydro-thermal alteration of feldspars rich in potassium. Kaolin, obtained at the mine, mainly contains varying amounts of impurities such as iron oxide (Fe2O3) and anatase (TiO2). These components negatively affect the quality of the commercial product. This research was performed to improve the quality of kaolin to be used in the paper industry with the goal of reducing the impurities of iron and titanium oxides. Different sized fractions of the original sample were analyzed by XRD. The results obtained showed that the mineralogical composition is: quartz, muscovite, kaolinite, dolomite, albite and orthoclase. Kaolin, like all clays, has a thin dissemination of minerals throughout it. After processing kaolin, the particle size fraction of less than 45μm, corresponding to the liberation mesh size, was retained for purification by chemical treatment with different acids of different concentrations (hydrochloric acid, sulfuric acid, acetic acid), heated to boiling point temperatures. The kaolin samples treated with the various acids above were analyzed by X-ray fluorescence and by XRD. The results obtained from the sample treated with hydrochloric acid show that the iron oxide content of acid is reduced by 1.65% to 0.88%. Meanwhile, the brightness of the sample reached 90% under the effect of the treatment with hydrochloric acid at concentration of 2 mole/dm3.
Źródło:
Mining Science; 2015, 22; 171-180
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Active Capping Treatment of Copper and Chromium Contaminated Sediment with Bentonite Kaolin and Sand to Inhibit their Release to the Overlying Water
Autorzy:
Aliyu, Mohammed Kabir
Abd Karim, Ahmad Tarmizi Bn
Chan, Chee Ming
Abdulkadir, Aeslina
Bin Daud, Zawawi
Oyekanmi, Adeleke Abdulrahman
Powiązania:
https://bibliotekanauki.pl/articles/2202312.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
in situ capping
polluted sediment
bentonite
kaolin
chromium
copper
Opis:
The public concern over sediment contamination brought on by mining operations, excessive use of chemical fertilisers or pesticides, industrial, agricultural, and municipal effluent, is increasing. Dredging is a more expensive treatment option than in situ capping of polluted sediment for immobilising pollutants in sediments on site. In order to stop the release of Cr and Cu from chemically contaminated sediments, this study aimed to evaluate the efficiency of utilising active capping materials such as bentonite (B), kaolin (K), and a 1:1 combination of bentonite and kaolin (BK) as capping materials. In a 90-day laboratory experiment carried out in glass tanks with a 1 cm thickness cover of capped material plus sand spread over the polluted sediment, the efficacy of B, K, and BK in inhibiting trace metal leachability was examined. The findings demonstrated that B and BK decreased the ability of sediments to leach Cr and Cu. The results suggest that BK and B should be considered as a suitable active material for capping treatment of polluted sediment sites because of their high Cu and Cr trapping. According to an analysis of adsorption kinetics, chemisorption was the adsorption process. The outcomes of this study demonstrated the potential for using kaolin, a bentonite-kaolin clay mixture covered with sand, and bentonite as capping materials for the in-situ treatment of Cr and Cu polluted coastal sediments.
Źródło:
Journal of Ecological Engineering; 2022, 23, 12; 264--272
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surowiec kaolinowy jako potencjalny materiał do syntezy zeolitu typu A
Raw kaolin as a potential material for the synthesis of a-type zeolite
Autorzy:
Wdowin, M.
Powiązania:
https://bibliotekanauki.pl/articles/216047.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
reakcja syntezy
kaolin
Na-A
charakterystyka mineralogiczna
charakterystyka chemiczna
badania teksturalne
synthesis reaction
raw kaolin
mineralogical characteristics
chemical characteristics
textural investigations
Opis:
W pracy przedstawiono możliwość uzyskania materiału zeolitowego typu A z naturalnych surowców ilastych. Materiał wykorzystany do syntezy stanowił wysokiej klasy kaolin pozyskiwany dla celów ceramicznych z piaskowca kaolinowego ze złoża Maria III k. Bolesławca. Surowiec kaolinowy poddano szeregom reakcji celem otrzymania zeolitu typu A. W pierwszym etapie materiał kalcynowano celem uzyskania amorficznego, bardziej reaktywnego produktu (metakaolinu). Następnie metakaolin poddano reakcji hydrotermalnej (w temperaturze 100°C), gdzie materiał ten połączono z roztworem wodnym 3 mol•dm–3 wodorotlenu sodu. W wyniku reakcji otrzymano zeolit Na-A, który scharakteryzowano stosując metody mineralogiczne (XRD, SEM-EDS, DTA/TG), chemiczne (XRF) i teksturalne (ASAP). Badania XRD wykazały, że otrzymany produkt stanowi wysokiej czystości zeolit typu A, gdzie udział fazy zeolitowej w otrzymanym materiale wyniósł (95% wt.), resztę stanowił kwarc. Analizy morfologii ziaren (SEM) potwierdziły dobrą krystalizację zeolitu, gdzie materiał ten formuje bardzo dobrze wykształcone kubiczne kryształy. [...]
The paper presents the obtaining possibility of type A zeolite material from natural clays. The material used for the synthesis was a high-quality kaolin extracted for ceramic needs derived from kaolin sandstones of Maria III deposits near Boleslawiec. Raw kaolin was subjected to a series of synthesis reactions in order to obtain zeolite A. In the first stage a tested material was calcined in order to obtain an amorphous, more reactive product (metakaolin). Next, metakaolin was hydrothermally reacted (at 100°C) where the material was combined with the aqueous solution of 3 mol•dm–3 NaOH. The reaction gave the zeolite Na-A, which was characterized using the mineralogical (XRD, SEM-EDS, DTA/TG), chemical (XRF), and textural (ASAP) methods. XRD studies have shown that the obtained product is of high purity zeolite A wherein content of zeolite phase in the obtained material was 95% wt. The rest was a quartz. Grain morphology analysis (SEM) confirmed the good crystallization of zeolite, wherein the zeolite is formed by very well developed cubic crystals. [...]
Źródło:
Gospodarka Surowcami Mineralnymi; 2015, 31, 3; 45-57
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metody emisji akustycznej do monitorowania pęknięć w materiałach suszonych
Application of acoustic emission method for monitoring of cracks in dried material
Autorzy:
Banaszak, J.
Powiązania:
https://bibliotekanauki.pl/articles/2072078.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
lokalizacja pęknięć
emisja akustyczna
suszenie
kaolin
crack localization
acoustic emission
drying
Opis:
W trakcie suszenia materiałów powstające w nich pęknięcia są źródłem emisji sygnałów akustycznych. Intensywność tych sygnałów, ich liczba oraz energia mogą służyć do bieżącej oceny destrukcji materiałów w trakcie procesu suszenia. Dzięki temu możliwa jest odpowiednia kontrola warunków suszarniczych pozwalająca na uniknięcie destrukcji wyrobu. Celem pracy było przedstawienie możliwości zastosowania wielokanałowej metody emisji akustycznej do oceny stanu zniszczeń w suszonej kaolinowej próbce oraz lokalizacja miejsc ich powstawania.
Cracks occurring during drying process are a source of acoustic emission signals. Intensity of these signals, their number and energy, can be used for ongoing evaluation of material destruction during drying. Therefore, one can provide a suitable control of drying conditions which allows one to avoid the final product destruction. A purpose of this paper was to present the applicability of multi-channel acoustic emission method for assessing dried kaolin sample fractures and their localization.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 1; 10--12
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ warunków przechowywania na właściwości ekstrudowanych preparatów skrobi ziemniaczanej i kaolinu
The influence of storage conditions on the properties of extruded potato starch and kaolin
Autorzy:
Tomaszewska-Ciosk, Ewa
Golachowski, Antoni
Dróżdż, Wioletta
Boruczkowska, Hanna
Zdybel, Ewa
Powiązania:
https://bibliotekanauki.pl/articles/2198408.pdf
Data publikacji:
2012-12-31
Wydawca:
Instytut Hodowli i Aklimatyzacji Roślin
Tematy:
ekstruzja
kaolin
skrobia ziemniaczana
tworzywa biodegradowalne
biodegradable materials
extrusion
potato starch
Opis:
Celem pracy było określenie czasu i warunków przechowywania na właściwości ekstrudatów otrzymanych ze skrobi oraz mieszaniny skrobi i kaolinu. Skrobię ziemniaczaną oraz mieszaninę skrobi ziemniaczanej i kaolinu w ilości 50% poddano procesowi ekstruzji w jednoślimakowym ekstruderze firmy Brabeder – typ 20DN. Wytworzone preparaty przechowywano w komorze suszarniczej oraz w komorze klimatycznej przez okres: 1, 3, 6, 9, 14 i 21 dni. Po tym czasie w ekstrudatach określono: zawartość wody, stopień ekspansji, odkształcenie przy złamaniu oraz moment gnący. Właściwości preparatów różniły się w zależności od rodzaju ekstrudowanej mieszanki oraz czasu i warunków przechowywania. Ekstrudaty wytworzone z mieszanki z dodatkiem kaolinu charakteryzowały się mniejszą ekspansją, mniejszym pochłanianiem wilgoci oraz mniejszym odkształceniem w chwili złamania i mniejszym momentem gnącym w porównaniu z ekstrudatami wytworzonymi z naturalnej skrobi ziemniaczanej. Preparaty przechowywane w warunkach większej wilgotności odznaczały się większym stopniem ekspansji oraz mniejszym odkształceniem i mniejszym momentem gnącym w stosunku do preparatów przechowywanych w niższej wilgotności.
The purpose of the work was to determine the properties of extrudates obtained from potato starch and potato starch with kaolin addition during storage in different conditions. The starch was subjected to extrusion process in a single screw laboratory Brabender extruder (of 20DN type). The extruded starch was stored in drier chamber and controlled environment chamber. Storage periods were defined as follows: 1, 3, 6, 9, 14 and 21 days. After this time, we determined: moisture content, expansion ratio, elongation at breaking and bending moment in prepared samples. The properties of extrudates were different and depended on the kind of extruded starch, time and conditions of storage. Extrudates produced from starch with kaolin were characterized with lower expansion ratio, lower water adsorption, lower elongation at breaking and bending moment in comparison to extrudates produced using native potato starch only. Extruded starch stored in higher moisture showed higher expansion, lower elongation and lower bending moment in comparison to that stored in lower moisture.
Źródło:
Biuletyn Instytutu Hodowli i Aklimatyzacji Roślin; 2012, 266; 101-109
0373-7837
2657-8913
Pojawia się w:
Biuletyn Instytutu Hodowli i Aklimatyzacji Roślin
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowe dane o kaolinie ze złoża łupków kwarcytowych Jegłowa
Kaolin from Jegłowa sericite-quartz schists deposit - new data
Autorzy:
Speczik, S.
Gąsiński, A.
Konopka, G.
Powiązania:
https://bibliotekanauki.pl/articles/394789.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
kaolin
kopaliny towarzyszące
warstwy z Jegłowej
associated mineral raw material
Jegłowa beds
Opis:
Unikalnemu w skali światowej złożu łupków kwarcytowych Jegłowa towarzyszą między innymi kopaliny kaolinowe. W ciągu ostatnich lat złoże było eksploatowane z różną intensywnością i w innych kierunkach, zostały odsłonięte nowe partie kopaliny głównej i kopalin towarzyszących. W odsłoniętych fragmentach złoża mogły zachodzić pewne niekorzystne zmiany jakościowe dotyczące w szczególności surowca kaolinowego. Stąd zaistniała potrzeba ponownego, precyzyjnego udokumentowania jakości kaolinu z tego złoża. W niniejszej pracy zaprezentowano badania nad składem chemicznym metodą fluorescencji rentgenowskiej (XRF), składem mineralnym metodą proszkowej dyfrakcji rentgenowskiej (XRD) i analizy termicznej (TG+DTA), charakterystyką uziarnienia metodą dyfrakcji światła laserowego (LD-PSA) oraz barwą i parametrami technologicznymi surowca kaolinowego z Jegłowej. Badania prowadzono nad uzyskaną po szlamowaniu frakcją technologicznie uzasadnioną. Wyniki badań wskazują, że szlamowany kaolin z Jegłowej jest surowcem bardzo wysokiej jakości, o charakterze niemal wyłącznie kaolinitowym. Jedyną niekorzystną cechą, wymagającą korekty jest stosunkowo niska wytrzymałość na zginanie. Nie stwierdzono również, by długa ekspozycja fragmentów złoża na warunki atmosferyczne obniżyła w znaczący sposób parametry jakościowe kopaliny kaolinowej. Niezwykle korzystną cechą jest bardzo mała zmienność jakości tej kopaliny. Wskazano również możliwe dziedziny aplikacji kopalin kaolinowych ze złoża łupków Jegłowa: przemysł ceramiczny, gumowy, papierniczy i kosmetyczny. Sugeruje się, by prowadzić dalej badania w kierunku rozpoznania złoża łupków kwarcytowych i obszarów do niego przylegających pod kątem zawartości kopaliny kaolinowej. Znalezienie nowych pokładów, gniazd i soczew kaolinów, przy założeniu małej zmienności parametrów jakościowych surowca i dużego uzysku kaolinu szlamowanego, może uczynić eksploatację tego surowca opłacalną.
The unique refractory schists from Jegłowa deposit are accompanied, among others, by kaolin raw material. The deposit was exploited with various intensity and in different directions within last years. The new locations of minerals were uncovered. Alteration processes could change the quality of uncovered raw materials, what is especially important for kaolins. Thus there was a need to precisely investigate the quality of kaolins from Jegłowa beds. In this paper we present data on the mineral composition (X-Ray Diffraction and Differentia Thermal Analysis data) and chemical composition (X-Ray Fluorescence data) of the raw kaolin material. Also technological properties of kaolins were examined. All the analysis were carried out on the washed raw kaolin material. It was shown, that washed kaolin from Jegłowa has very high quality and kaolinite is almost its only mineral component. The possible fields of the application of this material were showed. The only unfavorable property of this material is its low dry strength. It has to be corrected by means of special additives. It was show that exposure of kaolin beds to atmospheric conditions in open-pit mine has no significant influence on the quality of this material. The low variability of the quality of washed kaolins from Jegłowa is a very favorable feature of the deposit. Washed kaolin from Jegłowa can be successfully using as a raw material for ceramics, rubbers, cosmetics and paper industry. It is suggested that finding of new lenses, veins and nests of kaolin near to Jegłowa deposit can make profitable exploitation of this raw material, taking high content of kaolin after washing and low variability of this material into account.
Źródło:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN; 2010, 79; 233-244
2080-0819
Pojawia się w:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The role of kaolin and Bordeaux mixture in Vitis vinifera under water stress conditions: oxidative stress
Autorzy:
Dias, M.
Jesus, C.
Pinto, G.
Santos, C.
Goncalves, B.
Goncalves, D.
Malheiro, A.
Correia, C.
Moutinho-Pereira, J.
Powiązania:
https://bibliotekanauki.pl/articles/80420.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conference
kaolin
Bordeaux mixture
Vitis vinifera
water stress
oxidative stress
grape-vine
plant stress
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2013, 94, 2
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Factors affected the performance of fire clay refractory bricks
Czynniki wpływające na wytrzymałość cegieł z gliny ogniotrwałej
Autorzy:
Elngar, M. A. G.
Mohamed, F. M.
El-Bohy, S. A. H.
Sharaby, C. M.
Shalabi, M. E. H.
Powiązania:
https://bibliotekanauki.pl/articles/349655.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
wytrzymałość
kruszywo szamotowe
kaolin
szok termiczny
siła kompresji
refractory
grog
thermal shocks
compressive strength
Opis:
In this investigation some factors affected the performance of the fire clay refractory bricks such as size of grog, percentage of water added to the raw material, percentage of grog and temperature of firing were studied. The results showed that if the percentage of grog increased the shrinkage of bricks decreased, as well as density of bricks was increasing the porosity and water absorption also increased. Furthermore, with increasing of the added water to the raw material the porosity of the bricks increased and if water absorption increased, density decreased. The characteristics of raw material by such methods as x-ray and chemical analysis were also examined.
W pracy zbadano niektóre czynniki wpływające na wytrzymałość cegieł z gliny ogniotrwałej, tj. rozmiar kruszywa szamotowego, procent dodanej wody, zawartość procentowa kruszywa szamotowego, czy temperatura wypalania. Wyniki wskazały, że gdy zawartość procentowa kruszywa szamotowego zwiększyła się to kurczliwość cegieł malała. Analogicznie, gdy gęstość cegieł rosła, porowatość i absorpcja wody również rosła. Zwiększając ilość wody dodawanej do surowca, wywoływało się zwiększenie porowatości cegieł, zaś gdy absorpcja wody zwiększała się - gęstość materiału malała. Charakterystyka materiału za pomocą promieni X oraz analizy chemicznej została również przedstawiona.
Źródło:
Górnictwo i Geoinżynieria; 2009, 33, 4; 49-61
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies