Temat: internal combustion - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Anomalies in combustion of hydrogen in a SI engine modified to work as a supercharged one
Autorzy:: Szwaja, S.
Cupiał, K.
Grab-Rogaliński, K.,
Powiązania:: https://bibliotekanauki.pl/articles/246823.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion
hydrogen
internal combustion engine
supercharging
Opis:: The paper describes combustion anomalies of various types randomly or permanently occurring while hydrogen is burnt in a supercharged spark ignited reciprocating engine. The anomalies were mainly identified as result of combustion pressure data analysis. Originally, the engine was a compression ignition one fuelled with diesel fuel. Modifications done on the engine dealt with decrease in its geometric compression ratio and equipping it with a spark plug located in diesel fuel injector position. The anomalies presented in the paper are typically associated with several abnormal phenomena as follows: flame propagation into intake manifold called back-fire, hydrogen spontaneous ignition by hot surface, flame propagation during valves overlap and extinguishing spark discharge flame kernel by high turbulence around a spark plug. These anomalies were observed in the supercharged engine, however, some of them were also detected while the engine was operated as a freely aspirated one. As investigated, some of these malfunctions would have been removed by change in engine operating parameters. Others need major changes in both exhaust pipeline geometry, hydrogen injection system, engine cylinder geometry and valve timing.
Źródło:: Journal of KONES; 2012, 19, 3; 437-442
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Applications of NRTC Cycle to Determine a Different Fuel Consumption and Harmful Emissions Caused by Changes of Engines Technical Conditions
Autorzy:: Hromádko, J.
Hönig, V.
Miler, P.
Powiązania:: https://bibliotekanauki.pl/articles/301864.pdf
Data publikacji:: 2008
Wydawca:: Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:: internal combustion engine
fuel consumption
harmful emissions
Opis:: The main topic of the paper is to determine different fuel consumption and harmful emissions caused by engine's changes of technical conditions. The change of technical condition of combustion engine at any working point of engine proves different change of fuel consumption and production of harmful emissions. Therefore it is necessary to compare two technical conditions to determine the same engine load. For this purpose the special simulation programme of engine load in Non-Road Transient Cycle (NRTC) was created.
Źródło:: Eksploatacja i Niezawodność; 2008, 4; 63-65
1507-2711
Pojawia się w:: Eksploatacja i Niezawodność
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The Fourier transform as a new approach of evaluating the internal combustion engine indicator diagram
Autorzy:: Łoza, Ł.
Sitnik, L. J.
Powiązania:: https://bibliotekanauki.pl/articles/244677.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: indicator diagram
Fourier transform
internal combustion engine
Opis:: In this paper, the authors present an introduction to the new method of evaluating the indicator diagram of internal combustion engine. For several years, it was observed that analyses of combustion processes have been hardly changed since they were conducted for the first time. At the moment, the diagrams are plotted more and more precisely owing to the new sensors and digital processors. Despite all of these high technical advantages, which were obviously unavailable in the past, theoretical approach for describing indicator diagram has not changed in significant way. Nowadays, the indicator diagrams are still evaluated very generally and are presented in much too idealistic way as a smooth curve of pressure changes, without any disturbances, which are being detected very easily now. Furthermore, it appears that performance improvements of the IC engines are in need of developing new methods for analysis and evaluation. The Fourier transform is a new way to look at the combustion process in the engines. It is basically a mathematical instrument for analysing different types of signals, which are transformed, from time domain into frequency domain. It enables identifying specific sinusoidal components of arbitrary signals and separates relevant ones from the noise. This allows one to see significant differences in two or more apparently similar signals and detect the crucial parts. If we treat pressure changes in time like a common signal, we can compute Fourier transform and see basic components of the diagram.
Źródło:: Journal of KONES; 2017, 24, 4; 173-180
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Exhaust gas temperature measurements in diagnostics of turbocharged marine internal combustion engines. Part II Dynamic measurements
Autorzy:: Korczewski, Z.
Powiązania:: https://bibliotekanauki.pl/articles/258840.pdf
Data publikacji:: 2016
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: diagnostic
internal combustion engine
exhaust gas temperature
Opis:: The second part of the article describes the technology of marine engine diagnostics making use of dynamic measurements of the exhaust gas temperature. Little-known achievements of Prof. S. Rutkowski of the Naval College in Gdynia (now: Polish Naval Academy) in this area are presented. A novel approach is proposed which consists in the use of the measured exhaust gas temperature dynamics for qualitative and quantitative assessment of the enthalpy flux of successive pressure pulses of the exhaust gas supplying the marine engine turbocompressor. General design assumptions are presented for the measuring and diagnostic system which makes use of a sheathed thermocouple installed in the engine exhaust gas manifold. The corrected thermal inertia of the thermocouple enables to reproduce a real timehistory of exhaust gas temperature changes.
Źródło:: Polish Maritime Research; 2016, 1; 68-76
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Exhaust gas temperature measurements in diagnostics of turbocharged marine internal combustion engines Part I standard measurements
Autorzy:: Korczewski, Z.
Powiązania:: https://bibliotekanauki.pl/articles/259776.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: diagnostic
internal combustion engine
exhaust gas temperature
Opis:: The article discusses the problem of diagnostic informativeness of exhaust gas temperature measurements in turbocharged marine internal combustion engines. Theoretical principles of the process of exhaust gas flow in turbocharger inlet channels are analysed in its dynamic and energetic aspects. Diagnostic parameters are defined which enable to formulate general evaluation of technical condition of the engine based on standard online measurements of the exhaust gas temperature. A proposal is made to extend the parametric methods of diagnosing workspaces in turbocharged marine engines by analysing time-histories of enthalpy changes of the exhaust gas flowing to the turbocompressor turbine. Such a time-history can be worked out based on dynamic measurements of the exhaust gas temperature, performed using a specially designed sheathed thermocouple. The first part of the article discusses possibilities to perform diagnostic inference about technical condition of a marine engine with pulse turbocharging system based on standard measurements of exhaust gas temperature in characteristic control cross-sections of its thermal and flow system. Selected metrological issues of online exhaust gas temperature measurements in those engines are discusses in detail, with special attention being focused on the observed disturbances and thermodynamic interpretation of the recorded measuring signal. Diagnostic informativeness of the exhaust gas temperature measurements performed in steady-state conditions of engine operation is analysed in the context of possible evaluations of technical condition of the engine workspaces, the injection system, and the fuel delivery process.
Źródło:: Polish Maritime Research; 2015, 1; 47-54
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Study of combustion chamber with a rotating detonation
Autorzy:: Łukasik, B.
Rowiński, A.
Irzycki, A.
Snopkiewicz, K.
Powiązania:: https://bibliotekanauki.pl/articles/246882.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
turbine engines
combustion chamber
rotating detonation
Opis:: Institute of Aviation in Warsaw realizes the project concerning the application of the phenomenon of combustion with rotating detonation to the combustion chamber designed and destined for turbine engines. The test chamber is adapted for supplying both with liquid (aviation kerosene) and gaseous fuels in the form of mixture with compressed air. It is equipped with a probe for pressure and temperature measurements inside the flame tube as well as at its inlet and outlet sections. The measuring system allows measurement of physical phenomenon at low (1 kHz) and high (1 MHz) frequencies. Electric signals representing temperature and pressure sensor's measuring quantities, fuel and compressed air supply systems parameters and ignition-triggering values are collected using data acquisition system controlled by a computer. The prototype of the combustion chamber was examined at the especially designed test facility to determine at quasi-static operating conditions its following characteristics: speed of inside shock wave, exhaust gas thermodynamic parameters and ignition and going-out limits of gaseous fuel. In this article construction of test bench, schematic diagrams of measurement and power supply systems as well as the research process, the way of measurement data analysis recorded during the carried-out experiments and data validation manner are detailed described. The method of measurement data processing, the resulting graphs, and the conclusions of the study are presented as well.
Źródło:: Journal of KONES; 2012, 19, 2; 313-320
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Testing of initiation of rotating detonation process in hydrogen - air mixtures
Autorzy:: Balicki, W.
Irzycki, A.
Łukasik, B.
Snopkiewicz, K.
Powiązania:: https://bibliotekanauki.pl/articles/247318.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
turbine engines
combustion chamber
rotating detonation
Opis:: The paper presents results of some research work done in the project, which aims to apply of an innovative combustion chamber to the turbine engine. Expected benefits of using of a new chamber in which classical deflagration type combustion process would be replaced with a detonation combustion type, arise from greater efficiency of FickettJacobs cycle, which corresponds to rotating detonation combustion, in comparison to "classical" Brayton cycle, characteristic of deflagration combustion. The presented task concerned fundamental research carried out on test bench designed and built at the Institute of Aviation in Warsaw. To initiate the detonation combustion in the fuel-air mixtures the ignition device of appropriately high energy is necessary. The released energy should be directed to the area where the mixture has proper constitution - preferably close to stoichiometric one. Four different ignition manners were examined in the course of research: electrical ignition system adapted from turbine engine (semiconductor spark plug), powder charge ignition (handgun cartridges), detonation primer ignition using pentryt, and high voltage discharge (plasma jet). The appearance of detonation type combustion was identified on the basis of combustion gas pressure run, measured using piezoelectric sensors at a frequency of 1 MHz.
Źródło:: Journal of KONES; 2012, 19, 2; 25-34
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Mathematical model phases of fuel injection in the spark -ignition engine with direct fuel injection during work on the heterogeneous mixture
Autorzy:: Sendyka, B.
Cygnar, M.
Janisz, K.
Powiązania:: https://bibliotekanauki.pl/articles/243627.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
internal combustion engine
fuel injection system
Opis:: The paper presents the methods and results of calculation of time necessary for transmission of a jet of stratified charge from the injector to the gap between the electrodes of the ignition plug, which is the basis for determination of the advance angle of fuel injection in relation to the advance angle of ignition. This time is the sum of duration of four phases of load jet way and is calculated basing upon a number of empiric formulae taken from recent publications. Constructors of gasoline engines are faced with higher and higher requirements as regards ecological problems and increase in engine efficiency at a simultaneous decrease in fuel consumption. Satisfaction of these requirements is possible due to recognition of the phenomena occurring inside the engine cylinder, choice of suitable optimal parameters of the fuel injection process, and determination of geometrical shapes of the combustion chamber and piston head. Increase of engine efficiency is connected, first of all, with the changes in fuel supply, it means a proper regulation of fuel - air mixture in dependence on the rotational speed and load; hence, combustion of stratified mixtures in a gasoline engines with direct fuel injection is essential for increase in efficiency with a simultaneous decrease in emission of toxic components of exhaust gases and fuel consumption. Such a kind of supply systems show that, apart from combustion of very lean mixtures a gasoline engine with direct fuel injection possesses many other advantages, i.e.: fuel consumption comparable with other engines with self - induced ignition, greater power than in other spark ignition engines with multi - point fuel injection. The results of the performed analysis were given in two-dimensional diagrams.
Źródło:: Journal of KONES; 2008, 15, 3; 465-470
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Analysis of the engine fuels impact on carbon dioxide emissions
Autorzy:: Worsztynowicz, B.
Powiązania:: https://bibliotekanauki.pl/articles/247066.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
combustion
engine fuels
emission
carbon dioxide
Opis:: The article addresses the topic of carbon dioxide emissions into the atmosphere as the result of the hydrocarbon fuels combustion in the combustion engines. Widespread use of individual means of transportation, where the combustion engines function as the basic propulsion source, has caused that they are one of the main sources of carbon dioxide emission into the atmosphere. Therefore, it has been subjected to some restrictions, similar to those applied towards toxic elements contained with exhaust. One of the most effective ways of restriction of carbon dioxide emission is to decrease fuel consumption. In addition, an important item is the implementation of fuels with less potential to create carbon dioxide as a result of their combustion. The article presents the results of comparative measurements conducted on the engine test stand in terms of prepared load characteristics for a spark ignition engine powered by gasoline as well as by natural gas. On the basis of these measurements the article provides the analysis of the impact of fuel composition and combustible mixture on carbon dioxide content in the exhaust gases. In the next stage of analysis, the criterion for the comparison was the value of carbon dioxide emission with reference to 1 kg of fuel resulting from the measurements and theoretical calculations of fuel combustion. The results of measurements and calculations were shown in forms of graphs. The measurements on a test stand were conducted for the engine of the older generation, whose design corresponds to the motors located in a large number of currently used vehicles. This allows a preliminary estimation of the carbon dioxide emissions coming from means of transport.
Źródło:: Journal of KONES; 2011, 18, 4; 571-575
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Internal combustion micro-chambers and micro-engines
Autorzy:: Kraszewska, H.
Rusin, M.
Powiązania:: https://bibliotekanauki.pl/articles/244746.pdf
Data publikacji:: 2008
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
microengine
shaft less engine
combustion chamber
Opis:: Technological progress caused miniaturization of internal-combustion engines. They found application in many areas. The acquaintance of the ignition and combustion processes in the small volumes, the solution of the problem of piston movement under the influence of a pulse combustion in chambers, the choice of materials and problems related with the mixtures and exhaust creation, all these issues require a exact acquaintance for the purpose of optimization of the micro engine performance. In the paper, some issues are talked over on the base of investigations performed on the small volume chambers in single compression machines and in the shaftless two-cycle engine. Researched was the influence of the micro chamber size and of the area/volume ratio value on the processes of combustion occurring in the very small volumes and with the large values of area/volume ratio. Together with raise of the area/volume ratio, the value of the combustion pressure impulse becomes lower. The influence of the chamber material type on the combustion processes was defined, both in the single compression machine as in the micro engine. The existence of micro chamber size influence on the combustion limits of the fuel/air mixtures was designated. It has been determined that the range of the combustion limit is decreased with diminishing of the combustion chamber diameter, at the same time these changes are not the function of the area/volume ratio value changes. The maximum values of the combustion pressure appeared when chamber was supplied with stoichiometric mixture, irrespective of the chamber dimensions.
Źródło:: Journal of KONES; 2008, 15, 4; 283-288
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Wykorzystanie metod wibroakustycznych w diagnostyce silników spalinowych
Application of vibroacoustics methods for ic engine diagnostics
Autorzy:: Madej, H.
Powiązania:: https://bibliotekanauki.pl/articles/197376.pdf
Data publikacji:: 2009
Wydawca:: Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:: silnik spalinowy
diagnostyka silników spalinowych
metoda wibroakustyczna
internal combustion engine
internal combustion engine diagnostic
IC engine
vibroacoustic method
Opis:: Drgania i hałas silnika spalinowego są nośnikiem informacji o stanie jego podzespołów mechanicznych. Energia sygnału drganiowego, generowanego w układzie tłokowo-korbowym, zależy od średniej prędkości obrotowej oraz położenia kątowego wału korbowego. Uszkodzenia mechaniczne mające wpływ na ciśnienie sprężania oraz zjawisko wypadania zapłonów wywołują chwilowe zmiany prędkości obrotowej wału korbowego i chwilowej gęstości widmowej energii sygnału drgań. W artykule przedstawiono wyniki badań mających na celu określenie wpływu symulowanych uszkodzeń na zmianę charakterystyk sygnałów drgań.
Sound and vibration signal of IC engine often give much dynamic information of mechanical system condition. The energy state of the pistons and the connecting rods is determined by the mean angular speed and the angular positions of the crankshaft. Changes in the pressure in cylinder caused by compression faults or misfire will affect directly the instantaneous angular speed of the crankshaft and vibration energy. In this paper engine faults and its influence on vibration of engine block and head is presented.
Źródło:: Zeszyty Naukowe. Transport / Politechnika Śląska; 2009, 65; 45-50
0209-3324
2450-1549
Pojawia się w:: Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Experimental research of properties of hydraulic drive for valves of internal combustion engines
Autorzy:: Szydłowski, T.
Smoczyński, M.
Powiązania:: https://bibliotekanauki.pl/articles/245475.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: camless engine
hydraulic actuator
internal combustion engine
servovalve
Opis:: This paper describes a research stand and results of experimental research of single-acting hydraulic drive for valves of internal combustion engines. The research stand of the hydraulic valve drive was consisted of: typical valve drive for high-speed internal combustion engine, commercial hydraulic actuator, commercial hydraulic accumulator and electrically controlled hydraulic distributor, which controlled the flow of oil supply to the hydraulic actuator. Rexroth commercial servovalve was used as hydraulic distributor for this valve drive. Components of hydraulic valve drive were mounted to specially designed research sleeve. On this sleeve complete drive, which consisted of a hydraulic cylinder and servovalve, was mounted. Drive control was performed in an open loop with a use of rectangular control signal. Displacement of the valve was measured by an optical displacement sensor. Tests were performed for constant lift of the valve, supply pressure set in the range of 6 to 10 MPa and at fixed temperature of the working medium and different initial deflections of valve spring. The behaviour of the drive was researched for bipolar and a rectangular control signals. Such range of measurements was to determine inter alia: the impact of the supply pressure and the control signals values on the drive work. Obtained results were used to verify the simulation model in a wide range of variation of the characteristic parameters of the electro-hydraulic actuator. The results of experimental measurements like valve movement and pressures in the drive were shown and analysed in this paper. With a reference to the valve movement, a detailed calculations of the valve kinematics were performed. Special attention was given to the opening and closing velocities of the valve, depending on the servo control signal. Subsidence valve velocity during its return movement was calculated. This subsidence valve velocity is an important parameter in terms of the applicability of this drive for the internal combustion engines. Valve opening time delay in opposition to the current control signal was also specified and discussed. Obtained results allowed to conclude that the proposed drive provides acceptable kinematic parameters for high-speed engines at supply pressures of at least 8 to 10 MPa. During the measurements acceptable valve subsidence speeds were obtained. It was found that there is a possibility of adjustment of this parameter by setting the slider servovalve negative overlap. Results became the basis of development of the model of this type of the drive. Further simulation studies will allow to evaluate the applicability of such valve drive for internal combustion engines. Further simulation studies allow to compare the proposed solution with known literature hydraulic valve drives.
Źródło:: Journal of KONES; 2013, 20, 1; 351-358
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Model of hydraulic double-acting drive for valves of internal combustion engine
Autorzy:: Szydłowski, T.
Smoczyński, M.
Powiązania:: https://bibliotekanauki.pl/articles/246081.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
servovalve
hydraulic actuator
camless engine
Opis:: The article presents the idea and the model of electrohydraulic double-acting valve drive for internal combustion engine. In this solution to control the position of the engine valve used Rexroth's servovalve and the double-acting actuator. This drive should give free control of valve lift, valve open andvalve close time. In the article the principles of the operation and the mathematical model of the drive are described. Submitted model gives bases to the initial value definition of the main parameters of the hydraulic drive. It lets execute the analysis of the features of such drive and point necessary modifications for the correct realization of the process of the gas exchange in internal combustion engine. The first results from the simulation showed that proposed solution allows obtaining desirable run of lift of valve in the wide range of engine speed. Comparisons of valve lift proceedings driven hydraulically and mechanically by the use of harmonic cam, for two engine speeds, obtained from simulations are presented in the article. These comparisons show that at greatest engine speeds it is indispensable the use of pressures of the working liquid exceeding 10 MPa to obtain nearing results to the classical mechanical timing gear. Preliminary simulation test results indicate that it may ensure desired run of lift of valve in the wide range of engine speed
Źródło:: Journal of KONES; 2009, 16, 1; 487-494
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Exhaust gas recirculation strategy in the hydrogen SI engine
Autorzy:: Szwaja, S.
Naber, J. D.
Powiązania:: https://bibliotekanauki.pl/articles/243087.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: internal combustion engine
hydrogen
exhaust gas recirculation (EGR)
Opis:: It is known that Exhaust Gas Recirculation (EGR) can be successfully applied not only for reducing NOx content in exhaust gases but also for reduction of combustion knock in SI engines. From this point of view, EGR can be particularly effective for knock elimination in the hydrogen reciprocating engine. Additionally with the application of EGR, the H2-air combustion can be maintained at the stoichiometric ratio enabling highly efficient NOx reduction in catalytic converters. In this paper a strategy of estimating EGR for the naturally aspirated, hydrogen fuelled engine is explained. On the basis of this strategy, the closed loop control system of the EGR was built and was implemented for the single cylinder CFR engine. There is also an outline of the test bed and several examples of in-cylinder pressure courses recorded under various EGR percentages. Next, the impact of EGR on combustion knock in the hydrogen fuelled engine is presented. Finally, conclusions concerning EGR application for hydrogen combustion in the IC engine are presented. EGR calculation and control scheme, main diagram of EGR calculation, subroutine (Sub-block) for calculating the molecular weight of EGR gases, in-cylinder pressure traces for several EGR levels during hydrogen combustion in the CFR engine, the fluctuating component of in-cylinder pressure during hydrogen combustion with several levels of EGR, peak pressure of fluctuation component of in-cylinder pressure vs. EGR percentage are presented in the paper.
Źródło:: Journal of KONES; 2007, 14, 2; 457-464
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Quantumness in diagnostics of marine internal combustion engines and other ship power plant machines
Autorzy:: Girtler, Jerzy
Rudnicki, Jacek
Powiązania:: https://bibliotekanauki.pl/articles/34602291.pdf
Data publikacji:: 2023
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: diagnostics
stochastic proces
internal combustion engine
random variable
Opis:: The article provides proof that the diagnostics of marine internal combustion engines and other ship power plant machines should take into account the randomness and unpredictability of certain events, such as wear, damage, the variations of mechanical and thermal loads, etc., which take place during machine operation. In the article, the energy $ E $, like the other forms (methods) that it can be converted into (heat and work), is considered the random variable $ E_t $; at time $t$, this variable has the mean value $ \overline{E}_t $, which is the observed value of the statistic $ \overline{E}_{st} $ with an asymptotically normal distribution $ N ( E(E_t), \frac{ \sigma_t }{ \sqrt{n} } ) $, irrespective of the functional form of the random variable $E_t$. A proof is given that shows that the expected value estimated in the above way, considering the time t of the performance of task Z by a marine internal combustion engine or other ship power plant machine, can be used to determine the machine’s possible action (D_M). When compared to the required action (D_W) needed for task Z to be performed, this possible action makes it possible to formulate an operating diagnosis concerning whether the engine or machine of concern is able to perform task Z. It is assumed that an energy device of this type is able to perform a given task when the inequality D_M≥D_W holds. Otherwise, when D_M < D_W, the device cannot perform the task for which it was adopted in the design and manufacturing phase, which means that it is in the incapability state, although it still can be started and convert energy into the form of heat or work.
Źródło:: Polish Maritime Research; 2023, 4; 110-119
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "internal combustion" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język