Temat: innovative casting materials - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Effect of Temperature on Ausferritic Nodular Cast Iron Microstructure
Autorzy:: Gumienny, G.
Klimek, L.
Powiązania:: https://bibliotekanauki.pl/articles/379556.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
nodular cast iron
ausferrite
annealing
innowacyjne materiały odlewnicze
innowacyjne technologie
żeliwo sferoidalne
wyżarzanie
Opis:: The work presents the results of the studies of the effect of the temperature on the microstructure of ausferritic nodular cast iron. The ausferrite in the matrix was obtained by way of a specific combination of molybdenum and copper. The cast iron underwent annealing at the temperatures of 520, 550 and 580°C. The work presents the effect of the annealing temperature on the fraction of austenite in the cast iron matrix. The annealed and non-annealed cast iron hardness is given. The work also proves that an increase in the temperature up to 580°C causes a drop in the cast iron hardness.
Źródło:: Archives of Foundry Engineering; 2014, 14, 3 spec.; 21-24
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Investigation of an Advanced Cellulose Profile Used for the Manufacture of Gating Systems
Autorzy:: Zawieja, Z.
Sawicki, J.
Gumienny, G.
Sobczyk-Guzenda, A.
Powiązania:: https://bibliotekanauki.pl/articles/380939.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting technologies
innovative casting materials
cellulose profiles
gating system
aluminium silicates
gray cast iron
ausferrite
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
glinokrzemiany
żeliwo szare
Opis:: The here in paper contains the results of investigations on a new type of cellulose blend used for the manufacture of profiles applied in the process of making gating systems in the foundry industry. A standard cellulose profile was subjected to an experiment. During the experiment the profile was filled with a liquid cast iron and at the same time the temperatures of the liquid metal crystallizing inside the profile were measured as well as the temperature of the outer layer of the profile was controlled. Further, the microstructure of the cast iron, which crystallized out inside the cellulose profile, was analysed and the cellulose, thermally degraded after the experiment, was verified with the use of the chemical analysis method. Moreover, a quality analysis of the original as well as the degraded cellulose profile was run with the use of the FTIR infrared spectroscopy. The presented results revealed that the cellulose blend is aluminium silicate enriched and contains organic binder additives. The cast iron, which crystallized out, tended to have an equilibrium pearlitic structure with the release of graphite and carbides. The generation of disequilibrium ausferrite phases was also observed in the structure.
Źródło:: Archives of Foundry Engineering; 2014, 14, 3; 123-128
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Casting of Titanium Alloys in Centrifugal Induction Furnaces
Proces odlewania stopów tytanu w indukcyjnych piecach odśrodkowych
Autorzy:: Karwiński, A.
Leśniewski, W.
Wieliczko, P.
Małysza, M.
Powiązania:: https://bibliotekanauki.pl/articles/355142.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: centrifugal casting
innovative casting materials
titanium alloys
liquid ceramic slurries
ceramic mould
odlewanie odśrodkowe
innowacyjne materiały odlewnicze
stopy tytanu
ceramiczne formy odlewnicze
Opis:: This paper discusses technical problems related with casting of titanium alloys in centrifugal vacuum furnaces. The potentials of an analysis of the centrifugal casting process carried out in the Flow3D software CFD (Computational Fluid Dynamics) were presented. Simulations were carried out on a model set, which enables casting of two connecting rods for an I.C. engine. Changes in the mould filling process were examined for the three selected spinning velocities of the casting arm. The ranges of the metal flow velocity in mould were calculated as well as metal pressure in mould after reaching a predetermined spinning velocity. The results and the adopted mould geometry enabled determination of the magnitude of stress occurring in mould at the time of filling it with liquid titanium alloy. The paper presents a methodology for testing of the ceramic material strength using a four-point loading arrangement. The strength of the ceramic material was determined on samples heated at different temperatures. The obtained results enabled a thesis to be formulated that for pouring of moulds in a centrifugal vacuum furnace, the layered foundry ceramic moulds can be safely used, and the use of moulds that will provide the directional solidification of metal should be possible as well.
W artykule przedstawiono problemy techniczne związane z odlewaniem stopów tytanu w próżniowych piecach odśrodkowych. Zaprezentowano możliwości analizy procesu zalewania wirującej formy przeprowadzonej w programie Flow 3D CFD (Computational Fluid Dynamics). Obliczenia symulacyjne prowadzono dla zestawu modelowego umożliwiającego odlanie dwóch korbowodów silnika spalinowego. Analizowano zmiany sposobu wypełniania formy dla trzech wybranych prędkości wirowania ramienia odlewniczego. Obliczono zakresy prędkości przepływu metalu w formie oraz ciśnienia metalu występującego w formie po osiągnięciu założonej prędkości obrotowej. Uzyskane wyniki oraz przyjęta geometria formy pozwoliły na wyznaczenie wielkości naprężeń występujących w formie w momencie wypełnienia jej ciekłym stopem tytanu. Przedstawiono metodykę badania wytrzymałości materiału ceramicznego wykorzystującego czteropunktowy układ obciążający. Wyznaczono wytrzymałość materiału ceramicznego dla próbek wygizewanych w różnych temperaturach. Otrzymane wyniki pozwalają na przedstawienie tezy, że w podczas zalewania form w próżniowym piecu odśrodkowym będzie można bezpiecznie wykorzystywać warstwowe ceramiczne formy odlewnicze, oraz będzie możliwe zastosowanie form zapewniających założone kierunkowe krzepnięcie metalu.
Źródło:: Archives of Metallurgy and Materials; 2014, 59, 1; 403-406
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Analysis of the Crystallization of AZ91 Alloy by Thermal and Derivative Analysis Method Intensively Cooled in Ceramic Shell
Autorzy:: Rapiejko, C.
Pisarek, B.
Czekaj, E.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/380100.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technology
magnesium alloys
TDA method
hardness
crystallization
alloy AZ91
innowacyjne materiały odlewnicze
innowacyjna technologia odlewania
metoda ATD
krystalizacja
stop AZ91
Opis:: The work presents the test result of the influence of cooling rate on the microstructure of AZ91 alloy, Vickers micro-hardness and Brinell hardness. Studies cooling and crystallization of AZ91 alloy was cast into the ceramic shells pre-heated to 180°C and then air-cooled at ambient temperature or intensively super cooled in the liquid coolant. The TDA method was applied to record and characterize the thermal effect resulting from the phase transformations occurring during the crystallization of AZ91 alloy. The kinetics and dynamics of the thermal processes of crystallization of AZ91 alloy in the ceramic shells were determined. Metallographic tests were performed with the use of an optical microscope. A comparison of these test results with the thermal effect recorded by way of the TDA method was made. Influence of cooling rate of AZ91 on HV0, 01 micro-hardness and Brinell hardness alloy was examined.
Źródło:: Archives of Foundry Engineering; 2014, 14, 1; 97-102
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Influence of Modification and Casting Technology on Structure of IN-713C Superalloy Castings
Autorzy:: Binczyk, F.
Cwajna, J.
Gradoń, P.
Mańka, M.
Powiązania:: https://bibliotekanauki.pl/articles/381572.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
nickel alloy IN-713C
modification
cobalt aluminate
macrostructure
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
stop niklu
modyfikacja
kobalt
makrostruktura
Opis:: The paper presents the results concerning impact of modification (volume and surface techniques), pouring temperature and mould temperature on stereological parameters of macrostructure in IN713C castings made using post-production scrap. The ability to adjust the grain size is one of the main issues in the manufacturing of different nickel superalloy castings used in aircraft engines. By increasing the grain size one can increase the mechanical properties, like diffusion creep resistance, in higher temperatures. The fine grained castings. on the other hand, have higher mechanical properties in lower temperatures and higher resistance to thermal fatigue. The test moulds used in this study, supplied by Pratt and Whitney Rzeszow, are ordinarily used to cast the samples for tensile stress testing. Volume modification was carried out using the patented filter containing cobalt aluminate. The macrostructure was described using the number of grains per mm², mean grain surface area and shape index. Obtained results show strong relationship between the modification technique, pouring temperature and grain size. There was no significant impact of mould temperature on macrostructure.
Źródło:: Archives of Foundry Engineering; 2016, 16, 3; 11-14
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: ATD and DSC Analysis of IN-713C and ZhS6U-VI Superalloys
Autorzy:: Binczyk, F.
Cwajna, J.
Gradoń, P.
Powiązania:: https://bibliotekanauki.pl/articles/381895.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
Nickel superalloys
ATD method
DSC method
solidification parameters
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
stopy niklu
metoda ATD
metoda DSC
parametry krzepnięcia
Opis:: Paper presents the results of ATD and DSC analysis of two superalloys used in casting of aircraft engine parts. The main aim of the research was to obtain the solidification parameters, especially Tsol and Tliq, knowledge of which is important for proper selection of casting and heat treatment parameters. Assessment of the metallurgical quality (presence of impurities) of the feed ingots is also a very important step in production of castings. It was found that some of the feed ingots delivered by the superalloy producers are contaminated by oxides located in shrinkage defects. The ATD analysis allows for quite precise interpretation of first stages of solidification at which solid phases with low values of latent heat of solidification are formed from the liquid. Using DSC analysis it is possible to measure precisely the heat values accompanying the phase changes during cooling and heating which, with knowledge of phase composition, permits to calculate the enthalpy of formation of specific phases like γ or γ′.
Źródło:: Archives of Foundry Engineering; 2017, 17, 1; 13-16
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Effect of the Annealing Temperature on the Microstructure and Properties of Ausferritic Nodular Cast Iron
Autorzy:: Gumienny, G.
Klimek, L.
Kurowska, B.
Powiązania:: https://bibliotekanauki.pl/articles/383050.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
ausferritic cast iron
nodular cast iron
impact strength
annealing
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
żeliwo ausferrytyczne
żeliwo sferoidalne
siła uderzenia
wyżarzanie
Opis:: The paper presents the microstructure and selected properties of ausferritic nodular cast iron annealed at the temperature 520 and 550°C. This choice was dictated by the temperatures used in the practice of nitriding. Nodular graphite in cast iron was obtained with use of Inmold process. Cast iron containing molybdenum and copper ensuring obtaining an ausferrite in the cast iron matrix without the use of heat treatment of castings was tested. The effect of annealing temperature on the microstructure and the kind of fracture of the ausferritic nodular cast iron was presented. The effect of an annealing temperature on hardness, impact strength and the microhardness of ausferritic nodular cast iron matrix was shown too. The lamellar structure of phases in the cast iron matrix after annealing has been ascertained. There has been an increase in hardness of an annealed cast iron and microhardness of its matrix. The reduction in the impact strength of the cast iron annealed at 520 and 550°C was approximately 10-30%. Both an increase in the hardness of cast iron as well as an decrease in its impact strength is probably due to the separation of secondary carbides during the heat treatment.
Źródło:: Archives of Foundry Engineering; 2016, 16, 3; 43-48
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The Relationship Between the Solidification Parameters and Chemical Composition of Nickel Superalloy IN-713C
Autorzy:: Binczyk, F.
Gradoń, J.
Cwajna, J.
Szymszal, J.
Powiązania:: https://bibliotekanauki.pl/articles/383245.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
nickel alloy IN-713C
thermal analysis
solidification parameters
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
stop niklu IN-713C
analiza termiczna
parametry zestalania
Opis:: The paper presents the results of studies on the development of correlation of solidification parameters and chemical composition of nickel superalloy IN-713C, which is used i.a. on aircraft engine turbine blades. Previous test results indicate significant differences in solidification parameters of the alloy, especially the temperatures Tliq and Tsol for each batch of ingots supplied by the manufacturer. Knowledge of such a relationship has important practical significance, because of the ability to asses and correct the temperatures of casting and heat treatment of casts on the basis of chemical composition. Using the statistical analysis it was found that the temperature of the solidification beginning Tliq is mostly influenced by the addition of carbon (similar to iron alloys). The additions of Al and Nb have smaller but still significant impact. Other alloying components do not have significant effect on Tliq. The temperature Teut is mostly affected by Ni, Ti and Nb. The temperature Tsol is not in any direct correlation with the chemical composition, which is consistent with previous research. The temperature Tsol depends primarily on the presence of non-metallic inclusions present in feed materials and introduced during the melting and casting processes.
Źródło:: Archives of Foundry Engineering; 2014, 14, 4; 5-10
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Application of Modified Cores for Grain Refinement in Castings of Aircraft Turbine Blades
Autorzy:: Binczyk, F.
Cwajna, J.
Gradoń, P.
Powiązania:: https://bibliotekanauki.pl/articles/382651.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
Nickel alloy IN-713C
surface modification
turbine blades
macrostructure
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
Stop niklu IN-713C
modyfikacja powierzchni
łopatki turbinowe
makrostruktura
Opis:: Paper presents the results of research on modified surface grain refinement method used in investment casting of hollow, thin-walled parts made of nickel based superalloys. In the current technology, the refining inoculant is applied to the surface of the wax pattern and then, it is transferred to the ceramic mould surface during dewaxing. Because of its chemical activity the inoculant may react with the liquid metal which can cause defects on the external surface of the cast part. The method proposed in the paper aims to reduce the risk of external surface defects by applying the grain refiner only to the ceramic core which shapes the internal surface of the hollow casting. In case of thin-walled parts the grain refinement effect is visible throughout the thickness of the walls. The method is meant to be used when internal surface finish is less important, like for example, aircraft engine turbine blades, where the hollowing of the cast is mainly used to lower the weight and aid in cooling during operation.
Źródło:: Archives of Foundry Engineering; 2017, 17, 3; 19-22
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: The Influence of the Mould Filling Conditions on the Quality of Castings Made of EN AC-44000 Alloy
Autorzy:: Nadolski, M.
Konopka, Z.
Łągiewka, M.
Zyska, A.
Powiązania:: https://bibliotekanauki.pl/articles/380440.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry materials
innovative foundry technologies
plaster mould
counter-gravity casting
vacuum casting
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
forma odlewnicza
odlewanie próżniowe
Opis:: The work deals with the influence of change in the filling conditions of the ceramic moulds with plaster binder on the presence of gaseous porosity and the microstructure of the achieved test castings with graded wall thickness. Castings made of EN AC-44000 alloy, produced either by gravity casting, or by gravity casting with negative pressure generated around the mould (according to the Vacumetal technology), or by counter-gravity casting were compared. The results of examinations concerning the density of the produced castings indicate that no significant change in porosity was found. The increased size of silicon crystals was found for the increased wall thicknesses due to the slower cooling and solidification of castings.
Źródło:: Archives of Foundry Engineering; 2014, 14, 2; 19-22
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: The Influence of the Method of Mould Filling on the Quality of Castings Made of EN AC-44000 or EN AC-46200 Alloy
Autorzy:: Nadolski, M.
Konopka, Z.
Łągiewka, M.
Zyska, A.
Powiązania:: https://bibliotekanauki.pl/articles/380335.pdf
Data publikacji:: 2014
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry materials
innovative foundry technologies
plaster mould
counter-gravity casting
vacuum casting
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
forma odlewnicza
odlewanie próżniowe
Opis:: The performed examinations concerning the process of filling the plaster ceramic moulds with aluminium alloys allowed to assess the influence of various methods of introducing the metal into the mould cavity on the macro- and microstructure of the obtained experimental castings. The comparison was performed for castings with graded wall thickness made either of EN AC-44000 alloy or of EN AC-46000 alloy, produced either by gravity casting, or by gravity casting with negative pressure generated around the mould (according to the Vacumetal technology), or by counter-gravity casting. It was found that the silicon crystals grow in size with an increase in wall thickness due to the slower cooling and solidification of castings.
Źródło:: Archives of Foundry Engineering; 2014, 14, 4; 73-76
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Method and Apparatus for Assessing the Properties of Slags
Autorzy:: Biernat, S.
Bydałek, A. W.
Wołczyński, W.
Holtzer, M.
Powiązania:: https://bibliotekanauki.pl/articles/381284.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: environmental protection
innovative materials
innovative casting technologies
laboratory station
slags
ochrona środowiska
innowacyjne materiały odlewnicze
technologie innowacyjne
stanowisko laboratoryjne
żużle
Opis:: A special Slag-Prop Cu database has been developed to archive data from laboratory and industrial tests related to post-reduction slags. In order to enrich the data areas, it was decided to design a system for measuring the temperature of the liquid slag and its viscosity. Objectives of research work are to gather information on the properties of post-slags such as the temperature of liquid slag and its viscosity. The discussed issues are especially important in the foundry practice. Designed research stand and using of database applications can greatly facilitate the work of metallurgists, foundrymen, technologists and scientists. The viscosity measurement was developed and presented earlier. The author's analytical methodology was supplemented by a thyristor measuring system (described in the article). The system temperature measurement can be performed simultaneously in 3 ways to reduce the measurement error. Measurement of the voltage mV - using the Seebeck effect can be measured throughout the entire range of thermocouple resistance, up to 1300 °C. Direct temperature measurement ⁰C - measurement only below 1000 ⁰C. Additional measurement - the measurement can also be read from the pyrometer set above the bath. The temperature and the reading frequency depend on the device itself. The principle of measurement is that in a molten metal / slag crucible, we put a N-type thermocouple. The thermocouples are hung by means of a tripod above the crucible and placed in a crucible. The thermocouple is connected to a compensating line dedicated to this type of thermocouple. The cable is in turn connected to a special multimeter that has the ability to connect to a computer and upload results. Temperature measurement can be performed simultaneously in 3 ways to reduce the measurement error. The Sn-Pb alloy has been subjected to testing for proper operation of the device. In this foot should be observed the supercooling of the liquid, which initiates the crystallization process and in which latent heat begins to exude raising the temperature until the coagulation temperature is reached.
Źródło:: Archives of Foundry Engineering; 2017, 17, 3; 13-18
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Analysis of Crystallization Process of Intensive Cooled AlSi20CuNiCoMg Alloy
Autorzy:: Władysiak, R.
Kozuń, A.
Dębowska, K.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/379541.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
silumin
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewanie kokilowe
mgła wodna
Opis:: The work is a continuation of research concerning the influence of intensive cooling of permanent mold in order to increase the casting efficiency of aluminium alloys using the multipoint water mist cooling system. The paper presents results of investigation of crystallization process and microstructure of multicomponent synthetic hypereutectic alloy AlSi20CuNiCoMg. The study was conducted for unmodified silumin on the research station allowing the cooling of the special permanent sampler using a program of computer control. Furthermore the study used a thermal imaging camera to analyze the solidification process of multicomponent alloy. The study demonstrated that the use of mold cooled with water mist stream allows in wide range to form the microstructure of hypereutectic multicomponent silumin. It leads to higher homogeneity of microstructure and refinement of crystallizing phases of casting.
Źródło:: Archives of Foundry Engineering; 2017, 17, 2; 137-144
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: The Microstructure and Properties of the Bimetallic AZ91/AlSi17 Joint Produced by Compound Casting
Autorzy:: Mola, R.
Bucki, T.
Powiązania:: https://bibliotekanauki.pl/articles/381472.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
casting process
microstructure
mechanical properties
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
proces odlewania
mikrostruktura
właściwości mechaniczne
Opis:: Bimetallic AZ91/AlSi17 samples were produced by compound casting. The casting process involved pouring the AZ91 magnesium alloy heated to 650ºC onto a solid AlSi17 aluminum alloy insert placed in a steel mould. Prior to casting, the mould with the insert inside was heated to about 370ºC. The bonding zone formed between AZ91 and AlSi17 had a thickness of about 200 μm; it was characterized by a non-homogeneous microstructure. Two different areas were distinguished in this zone: the area adjacent to the AZ91 and the area close to the AlSi17. In the area closest to the AZ91 alloy, a eutectic composed of an Mg17Al12 intermetallic phase and a solid solution of Al in Mg was observed. In bonding zone at a certain distance from the AZ91 alloy an Mg2Si phase co-occurred with the eutectic. In the area adjacent to the AlSi17 alloy, the structure consisted of Al3Mg2, Mg17Al12 and Mg2Si. The fine Mg2Si phase particles were distributed over the entire Mg-Al intermetallic phase matrix. The microhardness of the bonding zone was much higher than those of the materials joined; the microhardness values were in the range 203-298 HV. The shear strength of the AZ91/AlSi17 joint varied from 32.5 to 36 MPa.
Źródło:: Archives of Foundry Engineering; 2018, 18, 1; 71-76
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Analysis of Defects in Castings Cast by Rheocasting Method SEED
Autorzy:: Bryksi Stunova, B.
Bryksi, V.
Powiązania:: https://bibliotekanauki.pl/articles/381889.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: solidification process
innovative foundry technologies
innovative foundry materials
rheocasting
casting defects
simulation
krzepnięcie
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
wady odlewów
symulacja
Opis:: The paper analyses specific defects of castings produced by semi-solid casting process, especially rheocasting method SEED, which uses mechanical swirling for reaching proper structure in semisolid state with high content of solid fraction. Heat treated alloy AlSi7Mg0.3 was applied for producing an Engine Bracket casting part. For observing structure, metallographic observation by light and SEM microscopy was used. To analyse the process, software ProCAST was used to simulate the movements in shot chamber and filling of the mold.
Źródło:: Archives of Foundry Engineering; 2016, 16, 3; 15-18
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "innovative casting materials" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język