Temat: injection pressure - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Research injection pressure with the Kistler 4067E pressure transmitter on Sulzer engine 3AL25/30
Autorzy:: Cuper-Przybylska, D.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/243556.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel
engine
marine engine
injection pressure
Opis:: Commonly used in the shipbuilding are combustion piston diesel engines that serve as power generators and main propulsion engines. More stringent of environmental regulations, however, require a more detailed understanding of the processes involved in piston engine combustion to reduce emissions to the environment. Also, the main reason for interest in research in the injection system is also the desire to obtain the highest piston engine power at the lowest fuel consumption. The article presents a study of changes in fuel injection pressure, which allows the operator to analyse the thermodynamic processes taking place in the cylinder. The injection pressure measurement allows you to make proper operating, maintenance and even repair decisions on the object under test. The purpose of this article is to investigate the operation of the injection pressure sensor and to compare the pressure curves measured by the Kistler 4067E sensor in various piston engine-operating states and the simulated failures of the SULZER 3AL25/30 diesel engine. The study was conducted on the SULZER 3AL25/30 engine at the Marine Engine Laboratory at the Gdynia Maritime University. Tests carried out with a measuring instrument for sampling are equipped with a Kistler 4067E pressure transducer, a Kistler 4624A amplifier and a Unitest 2008 computer system serviced with a recorder, processing and signal recording. For a thorough analysis, research conducted at different loads and different simulated engine failure.
Źródło:: Journal of KONES; 2017, 24, 3; 29-36
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: The effect of fuel injection parameters on the combustion process in a self-ignition engine
Autorzy:: Imiołek, M.
Piętak, A.
Wierzbicki, S.
Powiązania:: https://bibliotekanauki.pl/articles/243984.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: injection pressure
injector opening time
fuel injection advance angle
Opis:: This paper presents the effect of the main parameters of fuel injection, such as injection angle and injector opening time, on the combustion process in a self-ignition engine. The study continues the research aimed at optimising the bi-fuel feeding of self-ignition engines with a main fuel dose of methane (CNG). The results described in the paper apply to a HATZ 1B40 one-cylinder engine, which was adapted for being powered with methane. Examinations of the engine powered with a pilot dose of mechanically-injected diesel oil revealed the necessity to adjust the fuel injection advance angle. To this end, the mechanical system offuel supply was replaced with a Common Rail, with controllable fuel injection pressure, fuel injection advance angle and injector opening time. The results presented in the paper show the characteristics of the injector output depending on the fuel pressure in the Common Rail and on the duration of the electric impulse which opens the injector. Moreover, the article presents examples of pressure courses in the combustion chamber at a constant fuel dose and with a different fuel injection advance angle. An example of the combustion pressure course at a constant fuel dose and variable injection pressure and injector opening time is given.
Źródło:: Journal of KONES; 2010, 17, 3; 143-148
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Experimental study on the flowback of a carboxymethyl hydroxypropyl guar gum fracturing fluid with good temperature resistance
Autorzy:: Dai, Xiaodong
Li, Lei
Zhang, Xin
Cheng, Zhensong
Powiązania:: https://bibliotekanauki.pl/articles/2200830.pdf
Data publikacji:: 2022
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: fracturing fluid
backflow rate
injection pressure
displacement direction
proppant wettability
Opis:: For unconventional oil and gas reservoirs such as shale oil and gas as well as tight oil and gas, hydraulic fracturing generally enhances oil recovery. However, the flowback rate of the residual fracturing fluid is low. The residual fracturing fluid in the fracture or the rock ma- trix can reduce relative permeability of oil and gas, and the production rate will decrease. Therefore, it is necessary to study the factors that affect the flowback rate of the fracturing fluid. Most previous studies used the slot model, and viscous and capillary forces explain stable discharge in porous media. The conclusions were only a primarily qualitative analysis. The factors from experimental studies were not comprehensive, and they did not consider the influence of gravity. There are few studies on unstable drainage in porous media un- der different displacement directions. This paper presents a carboxymethyl hydroxypropyl guar gum fracturing fluid with good temperature resistance, and a fracturing fluid flowback experiment is carried on. The effects of the displacement direction, injection pressure, inter- facial tension, fracturing fluid viscosity, and proppant wettability on the flowback rate are analyzed. The research results can provide formulation of the on-site construction scheme.
Źródło:: Journal of Theoretical and Applied Mechanics; 2022, 60, 4; 733--744
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Effect of the parameters of pilot dose injection in a dual fuel diesel engine on the combustion process
Autorzy:: Wierzbicki, S.
Powiązania:: https://bibliotekanauki.pl/articles/246181.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel engine
injection pressure
injector opening time
fuel injection advance angle
course of combustion
Opis:: The paper presents the effect of the main parameters of pilot dose ignition: injection pressure, injection advance angle and injector opening time on the combustion process in a dual fuel diesel engine. The study continues the research conducted at the Department of Mechatronics of the University of Warmia and Mazury, Olsztyn, on optimisation of dual fuel self-ignition engines with CNG as the main fuel dose. The results presented in the paper were obtained with a single-cylinder engine HATZ 1B40, adapted to methane combustion. The results presented in the paper show the recorded changes of pressure in the combustion chamber with a constant fuel pilot dose and different ignition advance angles. Scheme of fuelling and measurement systems, view of engine indicating system, average changes of pressure in the combustion chamber, average changes of pressure in the combustion chamber and average changes of pressure in the combustion chamber at dual fuel engine supply with diesel oil at varied pilot dose injection angle, effects of advance angle of the pilot dose injection on the maximum pressure of combustion, at various proportions of diesel oil and CNG, average changes of pressure in the combustion chamber at double-fuel engine fuelled with diesel oil and various shares of methane in the dose powering the engine, CNG consumption as a function of the advance angle of the pilot dose injection for various shares of the pilot dose are presented in the paper.
Źródło:: Journal of KONES; 2011, 18, 3; 499-506
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Optimization of injection pressure for fuel consumption and exhaust emissions in a dimethyl ether (DME) engine with a common rail type injection system
Autorzy:: Yanai, T.
Konno, M.
Sato, Y.
Oikawa, H.
Nozaki, S.
Powiązania:: https://bibliotekanauki.pl/articles/247403.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel engines
alternative fuels
DME
common rail
injection pressure
fuel consumption
emissions
Źródło:: Journal of KONES; 2010, 17, 2; 511-518
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Piezo actuators injector of common rail fuel injection system
Piezoaktuator forsunki sistemy vpryska common rail
Autorzy:: Kirichenko, I.
Strilets, O.
Koshovy, M.
Powiązania:: https://bibliotekanauki.pl/articles/792831.pdf
Data publikacji:: 2012
Wydawca:: Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:: piezoelectric valve
electromagnetic valve
piezoelectric sensor
piezoelectric transformer
diesel engine
injection pressure
electromagnetic radiation
fuel injection system
Opis:: The problem of determination of expedience of the use of piezoelectric sensors in piezo actuators, connected with the scheme of DD-TR, is considered. The transitional characteristics and amplitude of output signal also is determinate.
В статье рассматриваются вопросы целесообразности применения в пьезоэлектрических актуаторах пьезоэлементов, выполненных по схеме ДД- ТР. Определена переходная характеристика и амплитуда выходного сигнала.
Źródło:: Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 3
1641-7739
Pojawia się w:: Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Badania i analiza wpływu ciśnienia wtrysku na rozpylenie paliwa w komorze o stałej objętości
Research and analysis of the influence of the injection pressure on spraying fuel in the chamber about the fixed volume
Autorzy:: Idzior, M.
Stobnicki, P.
Pielecha, I.
Czajka, J.
Powiązania:: https://bibliotekanauki.pl/articles/133903.pdf
Data publikacji:: 2013
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: ciśnienie wtrysku
metody optyczne
wtryskiwacz
silniki o ZS
injection pressure
optical methods
injector
CI engines
Opis:: W artykule przedstawiono wyniki badań wpływu ciśnienia wtrysku na rozpylenie paliwa na pozasilnikowym stanowisku badawczym w komorze o stałej objętości. W pierwszej jego części zawarto informacje dotyczące obiektu badań oraz zaprezentowano opis stanowiska wykorzystanego do badań interakcji strugi paliwa i ścianki tłoka. W drugiej część artykułu opisano metodologię wykonanych badań oraz przedstawiono wstępną analizę zmian jakości rozpylenia paliwa z wykorzystaniem metody szybkiego filmowania dla pojedynczego wtrysku paliwa.
In the article findings of the influence of the injection pressure on spraying fuel were presented on pose engine research position in the chamber about the fixed volume. In first his part they entered into information concerning the object of examinations, as well as a description of the position used for examinations was introduced to interaction of the stream of fuel and the wall of the piston. In second the part of the article was described methodology of performed examinations and a preparatory analysis of quality changes of spraying fuel with using the method of fast filming, for the isolated fuel injection was described.
Źródło:: Combustion Engines; 2013, 52, 3; 811-819
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Fuel feed to diesel at a start regime
Autorzy:: Fedyanov, E.
Slavuckiy, V.
Kanygin, Z.
Powiązania:: https://bibliotekanauki.pl/articles/246126.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: starting duty
features of process of giving
nozzle valve lifting
injection pressure
transients
cyclic fuel delivery
Opis:: Some factors defining starting properties of diesel engines are considered. Features of process of fuel feed on a starting mode are analyzed. Basic possibility of steering by processes of mixture forming and combustion is proved at a small speed of a crankshaft. Developed a design procedure of process of fuel feed in a diesel engine at a start regime. On the basis of the theory of transients in a fuel system, the reasons of deterioration of indicators of fuel feed process are explained at a start regime of diesel engine. Possibilities of a method of increase of initial pressure in a delivery highway by prostrating scrolling of a crankshaft with idle spray jets are investigated. The method of intensification of fuel feed process patented by authors used in diesel engine at a start regime. The results of numerical experiments confirming improvement of indicators of process of injection at high-speed speeding up of the pump of a high pressure are resulted: Increase maximum and an average pressure, cutting-down of duration of fuel feed process. The paper concentrates on possibility of improving fuel fed process at the starting regime by means of high speed forcing the fuel pump and the initial pressure rising by an earlier camshaft rotation with out of work injectors.
Źródło:: Journal of KONES; 2009, 16, 1; 111-116
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "injection pressure" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język