Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "waste glass" wg kryterium: Temat


Wyświetlanie 1-6 z 6
Tytuł:
Comparative Assessment of Environmental Effects by LCA Method of Natural Aggregates Extraction Processes and Production of Their Substitutes from Waste in the City Mining System
Autorzy:
Zegardło, Bartosz
Powiązania:
https://bibliotekanauki.pl/articles/1955518.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
aggregate substitute
ceramic waste
glass waste
environmental impact
life cycle assessment
Opis:
This paper is devoted to the topic of obtaining substitutes for natural aggregates in the city mining system. An article draws attention to the adverse effects of natural aggregate mining on the environment and presents its alternative based on processing waste mineral materials into aggregate form. Referring to the examples presented in the literature, technical possibilities of producing recycled aggregates from waste concrete, ceramic and glass materials were indicated. The system of collecting waste directly from potential users was also presented and the adaptation processes which waste must undergo were described. The research part of the study consisted of analyses of the environmental impact of the processes of obtaining natural aggregates and production of their substitutes from waste in the city mining system. The LCA (life cycle assessment) method was used to carry out the analyses. Using the available databases, calculations of the environmental impact of both processes were performed. The comparison of the obtained results proved that despite the unfavourable additional environmental effects caused by the adaptation processes required for waste, the environmental impact of the rational production of aggregates from recyclates is favourable, and such activities should be recommended for implementation in the industry.
Źródło:
Journal of Ecological Engineering; 2021, 22, 8; 251-257
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie szkła odpadowego w produkcji okładzinowych płytek szklanych
Glass wastes used in lining glass tiles production
Autorzy:
Woźniak, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/36105903.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Ceramiki i Materiałów Budowlanych
Tematy:
szklane płytki okładzinowe
szklane odpady
utylizacja
glass cladding tiles
glass waste
disposal
Opis:
Troska o środowisko naturalne to jeden z bardzo ważnych aspektów funkcjonowania producenta płytek i dekoracji ceramicznych i szklanych, jakim jest Ceramika Paradyż Sp. z o.o. W swoich działaniach podejmuje liczne wyzwania obejmujące m.in. obszar CSR, których celem jest wzmacnianie ekologicznie pozytywnego wpływu na najbliższe otoczenie i globalnie - na redukcję obserwowanych zmian klimatycznych. Przy wsparciu funduszy unijnych w ramach Sektorowych programów B+R - Programu Operacyjnego Inteligentny Rozwój przy dofinansowaniu udzielonym przez Narodowe Centrum Badań i Rozwoju i przy współpracy z Siecią Łukaszewicz Instytutem Ceramiki i Materiałów Budowlanych w Warszawie producent podjął wyzwanie w postaci opracowania technologii okładzin ściennych opartych na bazie odpadu szklanego w udziale minimalnym 90%. W założeniach produkcja tzw. „płytek szklanych” wpływa m.in. na zmniejszenie zużycia gazu jak również na wykorzystanie odpadów szklanych, powstających przy produkcji szkła gospodarczego czy utylizacji kineskopów CRT. Poniższy artykuł prezentuje streszczenie prac i ich wyników, jakie uzyskano w trakcie realizacji projektu.
Care for the natural environment is one of the very important aspects of the functioning of the manufacturer of ceramic and glass tiles and decorations, namely Ceramika Paradyż Sp. z o.o. In its activities, it takes up numerous challenges, including the area of CSR, the aim of which is to strengthen the ecologically positive impact on the immediate surroundings and globally - on the reduction of observed climate changes. With the support of EU funds under the Sectoral R&D programs - the Smart Growth Operational Program with co-financing from the National Center for Research and Development and in cooperation with the Łukaszewicz Network, the Institute of Ceramics and Building Materials in Warsaw, the manufacturer took up the challenge of developing a technology for wall cladding based on glass waste in a minimum share of 90%. In the assumptions, the production of the so-called „Glass tiles” affects, among others to reduce gas consumption as well as to use glass waste generated in the production of household glass or the disposal of CRT tubes. The following article presents a summary of the works and their results, which were obtained during the project implementation.
Źródło:
Szkło i Ceramika; 2021, 72, 3; 44-48
0039-8144
Pojawia się w:
Szkło i Ceramika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of ground waste glass addition on concrete prepared with their participation properties
Autorzy:
Jeleniewicz, Katarzyna
Rutkowska, Gabriela
Żółtowski, Mariusz
Kula, Dorota
Powiązania:
https://bibliotekanauki.pl/articles/29521052.pdf
Data publikacji:
2023
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
sustainable development
glass waste
concrete
properties
frost resistance
compressive strength
Opis:
Caring for the environment, in accordance with the principles of sustainable development, as well as the increase in the standard of living of society, introduces the need to conduct proper waste management. Construction is an industry with great potential for the management of glass waste as part of material recycling. The construction sector is characterized by high material consumption, with a limited amount of natural resources, meaning that research is constantly being performed on the possibility of replacing them with other common ingredients. A feature of the building materials industry is also the pursuit of continuous improvement of the properties of manufactured materials. The paper presents the research results on the impact of the partial replacement of Portland cement and aggregate with glass waste on strength parameters and frost resistance. For the purpose of experimental work, a concrete mix based on the C20/25 standard concrete with CEM I 42.5R Portland cement, in which from 0 to 20% of the cement or aggregate weight is replaced with glass waste (i.e., glass flour and glass cullet), is designed. In the test range, the glass flour slightly affected the deterioration of the compressive strength, while the glass cullet had no effect on the compressive strength after 56 days of maturation. Moreover, the addition of glass flour increases the bending strength, while the addition of glass cullet maintains a comparable bending strength compared to the reference concrete. The obtained concretes are frost-resistant concrete F150.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2023, 73 (145); 46-53
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The evaluation of the possible utilization of waste glass in sustainable mortars
Autorzy:
Dębska, Bernardeta
Krasoń, Joanna
Lichołai, Lech
Powiązania:
https://bibliotekanauki.pl/articles/2065623.pdf
Data publikacji:
2020
Wydawca:
Politechnika Częstochowska
Tematy:
glass waste
cement mortars
mechanical properties
absorbability
odpady szklane
zaprawy cementowe
właściwości mechaniczne
wchłanialność
Opis:
The assumptions of the low-carbon economy and sustainable development in construction leads to the search for ecological solutions in materials whose production generates significant amounts of carbon dioxide. Cement substitution with waste glass powder used in building mortars is part of this trending solution. This paper describes the results on the selective properties of mortars containing powdered waste glass in the amount of 0-20% by weight. The proposed modification gives satisfactory physical and mechanical properties to the cement mortars used in the building industry.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2020, 9, 2; 7--15
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wstępna ocena możliwości wykorzystania odpadów szklanych pochodzących z wyeksploatowanych świetlówek jako kruszywa do betonów cementowych
Initial assessment of the possibility of using glass waste coming from worn-out fluorescent lamps as aggregates for cement concrete
Autorzy:
Zegardło, B.
Drzymała, T.
Nitychoruk, J.
Jaworska, B.
Powiązania:
https://bibliotekanauki.pl/articles/317258.pdf
Data publikacji:
2018
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
odpady szklane
świetlówka
kruszywo
beton cementowy
kompozyt cementowy
glass waste
fluorescent lamps
aggregate
cement concrete
cement composite
Opis:
W pracy przedstawiono wstępne analizy możliwości wykorzystania odpadów szklanych pochodzących z wyeksploatowanych świetlówek, jako kruszywa do betonów cementowych. Materiał badawczy pozyskano z firmy utylizującej odpady elektryczne. Szkło ze wstępnie posegregowanych elementów oświetleniowych przetransportowano do laboratorium i pokruszono w moździerzu stalowym. W ten sposób uzyskane kruszywo poddano podstawowym badaniom, jakie wykonuje się dla kruszyw tradycyjnie stosowanych w budownictwie. Zbadano gęstość właściwą kruszywa, gęstość objętościową, nasiąkliwość, oceniono kształt ziaren oraz typ tekstury. W kolejnym etapie prac badawczych wykonano mieszankę betonową, w której jako substytut 25% kruszywa żwirowego zastosowano kruszywo z pokruszonych świetlówek. Zbadano wytrzymałość na ściskanie i rozciąganie tak powstałego betonu. Analiza wyników badań wykazała, że pokruszone szkło z wyeksploatowanych świetlówek może być potencjalnie wykorzystywane, jako kruszywo do betonów cementowych.
The paper presents preliminary analyzes of the possibilities of using glass waste from extruded fluorescent lamps as aggregates for cement concretes. The research material was obtained from a company that utilizes electrical waste. Glass from pre-sorted lighting elements was transported to the laboratory and crushed in a steel mortar. In this way, the aggregate obtained was subjected to the basic tests that are carried out for aggregates traditionally used in construction. The specific density of aggregate, bulk density, absorbability, grain shape and texture type were examined. In the next stage of research work, a concrete mix was made, in which, as a substitute for 25% gravel aggregate, crushed aggregate from crushed fluorescent lamps was used. The compressive and tensile strength of the concrete thus formed was tested. Analysis of the test results showed that broken glass from worn out fluorescent lamps can potentially be used as an aggregate for cement concrete.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2018, 19, 6; 314-317, CD
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Unconventional Materials from Sewage Sludge with a Potential Application in a Road Construction
Autorzy:
Wójcik, Marta
Bąk, Łukasz
Stachowicz, Feliks
Powiązania:
https://bibliotekanauki.pl/articles/102745.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sewage sludge
glass waste
recycling
civil engineering
road construction
osad ściekowy
odpady szklane
recykling
inżynieria lądowa
budowa dróg
Opis:
Limited possibilities of agricultural utilization of sewage sludge results in the development of unconventional methods of its final management. Recently, recycling of sewage sludge in road construction is under examination. Literature review mentions that properly prepared sludge might replace other conventional materials which are commonly used in a construction sector. In this paper, the proposition of the use of sewage sludge in the production of unconventional material for a road construction is presented. In laboratory tests, dewatered sewage sludge with the moisture content at the level of 62%, glass powder and quartz sand were applied. For the obtained product, physical and chemical characteristics were examined. The compressive strength and the hardness were also measured. The results were compared with other materials which are also used in construction sector. The research confirmed the possibility to produce a material from different fractions of waste, which might indicate usefulness in civil engineering.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 4; 65-75
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies