Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "fly" wg kryterium: Temat


Tytuł:
Analyse of the durability of ash-cement composites with fly ashes from the heap Michelin Poland SA subjected to corrosion
Autorzy:
Rudziński, A.
Powiązania:
https://bibliotekanauki.pl/articles/298424.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
fly ashes
heap
hydrates lime
corrosion
Opis:
Useless waste materials are often stored in urban areas taking valuable land and polluting the environment. There has been undertaken research which aim was to test the applicability of the ashes from multi-year heaps as a partial substitute for sand. In the ash-cement composites 10%, 20% and 30% weight of sand was replaced by an ash. Composites sand-ash-cement was modified by an addition of hydrated lime. Introduction of new materials environmentally friendly, using industrial waste is desirable when by using waste materials there is a possibility to obtain materials with desired, assumed technical characteristics and durability. The 30-day trials were subjected to corrosion in 6% solution of sodium chloride and magnesium sulfate. After the corrosion designated the compressive strength of each series, which compared with strengths of series in the same age and not subjected to corrosion. Generally, all composites with the ashes scored higher compressive strength in the control series - without ash. The presence of ash in composites significantly reduced the effects of corrosion. These results suggest the possibility of using these composites in road construction.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2014, 17(4); 361-370
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania i możliwości zastosowań mikrosfer z popiołów lotnych
The research results and application possibilities of fly ash microspheres
Autorzy:
Łach, M.
Mikuła, J.
Powiązania:
https://bibliotekanauki.pl/articles/134734.pdf
Data publikacji:
2016
Wydawca:
ADVSEO
Tematy:
fly ashes
microspheres
insulation materials
alkali activation
Opis:
The paper presents a short description of aluminosilicate materials which are microspheres derived from fly ash from coal combustion in power stations. The most important properties of such materials, the conditions of their formation, methods of obtaining and selected areas of application are discussed. The microspheres that were tested came from the Power Plant Skawina. Analysis of particle size and wall thickness of the microspheres and the analysis of the chemical composition have been carried out. This article also presents preliminary results of the alkaline activation of the microspheres in order to obtain a fraction within the zeolite. Alkali activation was carried out in several variants, using aqueous solutions of sodium hydroxide and the obtained results allow to determine the suitability of the microspheres to obtain zeolites in their substrate. Observations with the scanning electron microscope showed the existence of significant quantities of specific forms of zeolites, after alkaline activation processes of microspheres.
Źródło:
Technical Issues; 2016, 3; 74-78
2392-3954
Pojawia się w:
Technical Issues
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Granulacja popiołów lotnych uzyskanych ze spalania węgla brunatnego
Granulation of fly ashes obtained in brown coal combustion
Autorzy:
Obraniak, A.
Powiązania:
https://bibliotekanauki.pl/articles/2072538.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
granulacja talerzowa
popioły lotne
disc granulation
fly ashes
Opis:
W pracy przedstawiono wyniki badań dotyczących granulacji popiołów lotnych. Granulację prowadzono w sposób okresowy w granulatorze talerzowym przy stałej prędkości obrotowej 30 obr/min. Materiał sypki nawilżano podczas ruchu przesypowego przy stałym natężeniu zraszania. Otrzymane wyniki pozwoliły określić parametry procesu oraz właściwości uzyskanego granulatu.
Investigation results dealing with the granulation of fly ashes are presented in the paper. Granulation was conducted periodically in a disc granulator at constant rotational speed of 10 rpm. Loose material was wetted during tumbling at constant volumetric liquid flow rate. Results allowed one to describe process parameters and acquired granulate properties.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 3; 213--215
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ceramic Porous Preforms Manufactured from Waste Materials
Autorzy:
Kremzer, Marek
Powiązania:
https://bibliotekanauki.pl/articles/2048747.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite materials
ceramic preforms
waste materials
fly ashes
Opis:
The goal of this study is to develop a method of manufacturing porous ceramic skeletons used as semi-finished products for reinforcement of composite materials or as filters. For manufacturing skeletons, only waste materials from coal combustion (fly ashes and bottom slags) as well as rubber granules from used tires and car parts were used. These granules were a pore-forming agent that underwent thermal degradation during sintering process. The influence of sintering temperature, portion, and type of rubber granules on the porosity of developed ceramic skeletons was determined. The study of structure of base materials and the developed ceramic skeletons in a scanning electron microscope as well as their X-ray phase analysis were made. Results will allow to predict phases that can be formed on the metal-reinforcement interface during pressure infiltration.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 1; 283-288
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iron-containing phases in fly ashes from different combustion systems
Autorzy:
Szumiata, T.
Gzik-Szumiata, M
Brzózka, K.
Górka, B.
Gawroński, M.
Świetlik, R.
Trojanowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/148055.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
fly ashes
coal combustion
Mössbauer spectrometry
environmental protection
Opis:
The investigations of iron-containing phases existing in fly ashes were performed using transmission Mössbauer spectrometry. The examined samples of fly ashes were collected from different coal combustion systems, that is, stoker-fired boiler in municipal heating plant and pulverized coal boiler in power plant. Several phases are identifi ed in the samples: iron oxides, paramagnetic aluminosilicate glass with Fe3+ ions and Al2O4- -type spinel with Fe2+ ions. It was pointed out that proportions of contents of phases strongly depend not only on the combustion temperature but also on the way of ash collection.
Źródło:
Nukleonika; 2015, 60, 1; 151-154
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Morfologia, wielkość i gęstość mikrosfer z polskich i zagranicznych elektrowni
Morphology, size and density of cenospheres from Polish and foreign power plants
Autorzy:
Strzałkowska, E.
Stanienda-Pilecki, K.
Powiązania:
https://bibliotekanauki.pl/articles/166005.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
popioły lotne
mikrosfery
morfologia
grubość ścianek
fly ashes
cenospheres
morphology
shell thickness
Opis:
W pracy zamieszczono wyniki szczegółowych obserwacji mikroskopowych mikrosfer, dostępnych na rynku krajowym, jak i zagranicznym, przeprowadzonych pod kątem analizy kształtu, wielkości i grubości ścianek. Badania wykazały, że mimo iż mikrosfery zalicza się do materiałów równoziarnistych to próbki pochodzące z różnych elektrowni mogą wykazywać znaczne różnice w uziarnieniu. Większość mikrosfer cechuje się dużą sferycznością, jednak wraz ze wzrostem średnicy maleje ich sferyczność. Istotną cechą jakościową badanych mikrosfer jest ich niska gęstość objętościowa, dzięki czemu mikrosfery te mogą być stosowane do produkcji szerokiej gamy materiałów budowlanych, w tym i konstrukcyjnych, jako lekki wypełniacz do produkcji tworzyw sztucznych, czy betonów lekkich.
This paper presents the results of detailed microscopic observations of cenospheres, available in Poland as well as abroad. The observations were performed for shape, size and thickness of shells analysis. The survey shows that although cenospheres are classified as materials of equal size of grains, the samples coming from different power plants can characterize with various grain size. Most of the cenospheres are characterized with almost perfect sphericity, but as the diameter grows, the spherical shape becomes less regular. A significant quality feature of researched cenospheres is their low volume density, which allows using these cenospheres for producing various building materials including construction materials, light aggregate for plastics production and light concretes.
Źródło:
Przegląd Górniczy; 2018, 74, 12; 44-53
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Minimisation of environmental effects related with storing fly ash from combustion of hard coal
Autorzy:
Obraniak, A.
Gluba, T.
Ławińska, K.
Derbiszewski, B.
Powiązania:
https://bibliotekanauki.pl/articles/207816.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fly ashes
coal combustion
hard coal
popioły lotne
spalanie węgla
węgiel kamienny
Opis:
The tests have been carried out on granulation of fly ash that may significantly reduce the consequences of its storage and transport harmful to the environment, mainly secondary dusting. Granulation was conducted using a disk granulator. The experiments involved the evaluation of a loose additive (bentonite) impact, the analysis of moisture content and water and sodium glass impact, the optimisation of the added bentonite amount and the granulated product breaking resistance test. The were examined such parameters as the ratio of ash to fillers, the amount of supplied binding liquid (distilled water or waterglass) and the place of its feeding. The addition of bentonite to bed (ash) made it possible to completely granulate the material. The introduction of waterglass in place of demineralised water produced the desired effect.
Źródło:
Environment Protection Engineering; 2018, 44, 4; 177-189
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie efektywności procesów podczyszczania odcieków składowiskowych
The Comparison of the Effectiveness of Pre-treatment Processes of Landfill Leachate
Autorzy:
Nowak, R.
Włodarczyk-Makuła, M.
Wiśniowska, E.
Grabczak, K.
Powiązania:
https://bibliotekanauki.pl/articles/1817981.pdf
Data publikacji:
2016
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
odcieki składowiskowe
prefiltracja
ultrafiltracja
koagulacja
popioły lotne
leachate
prefiltration
ultrafiltration
coagulation
fly ashes
Opis:
Dumping is the most frequently used method of municipal waste management. According to the data of Central Statistical Office of Poland at present there are over 390 municipal landfills in our country. Dumping of municipal waste is connected with generation of leachates. Treatment of leachates is difficult because of the variability of their composition. Leachates are generated as a result of penetration of rainwater through the waste layer. Rainwater leaches organic and inorganic compounds from waste material. Treatment method of leachate depends on its physicochemical properties, susceptibility for biodegradation and further management. Pretreatment of leachate is necessary before their treatment in wastewater treatment plant (WWTP). WWTP can be a part of dumping place infrastructure. Pretreated leachate can also be discharged into sewerage system. The most effective methods of leachate treatment are reverse osmosis and evaporation. The methods mentioned above are, however, not energy-efficient and as a result expensive. Frequently used method is also leachate recirculation onto waste pile. This method is not a good solution. Because of this it is expedient to examine effective and cheap methods of leachate pretreatment. The aim of the investigation was to compare the effectiveness of pre-treatment of landfill leachate using the processes of pre-filtration on the sand and gravel bed, ultrafiltration membrane module, coagulation, or sorption/precipitation in the solidified mixture of ash and water. These studies were carried out using effluent from two municipal landfills. The leachate was collected from the afore-mentioned landfills four times in the period from March to June. The efficiency of contaminants removal in the adopted process conditions were varied. The pH value, conductivity, color, turbidity, odor, alkalinity, acidity, free CO2, COD, total hardness, calcium and ammonium nitrogen in the raw leachate (collected from landfills) and after pre-treated processes were determined. The effectiveness of the removal of organic and inorganic compounds does not depend on the characteristics of the raw leachate. The highest effectiveness of contaminants removal was obtained in the filter bed of fly ash (27-93%). The percentage losses of the values of indicators, reaching 86% in the ultrafiltration process were achieved. The efficiency of treatment leachate in the coagulation or pre-filtraton process was at a lower level. It is proposed to integrate the processes of filtration or coagulation with ultrafiltration process in a 2- or 3-stage system. In an integrated 3-stage system for the leachate treatment, the preliminary stage could be filtration on a bed of sand and gravel, the next step - pretreatment in a bed of fly ash, and the final step – ultrafiltration process. In an alternative arrangement of leachate treatment system, a preliminary step would be using coagulation process.
Źródło:
Rocznik Ochrona Środowiska; 2016, Tom 18, cz. 2; 122-133
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania możliwości wykorzystania popiołów lotnych z termicznego przekształcania osadów ściekowych do produkcji betonów zwykłych
Research on the Possibility of Using Fly Ashes from Combustion of Municipal Sewage Sludge on Properties of Ordinary Concretes
Autorzy:
Rutkowska, G.
Fronczyk, J.
Wichowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/1813742.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
dodatki do betonu
popiół lotny
wytrzymałość betonu
concrete additives
fly ashes
strength of concrete
Opis:
Wykorzystanie popiołów lotnych z termicznego przekształcania osadów ściekowych w technologii betonu realizuje założenia gospodarki odpadami proponowane w Unii Europejskiej. W pracy przedstawiono wyniki badań wpływu częściowego zastąpienia tym materiałem cementu portlandzkiego na parametry wytrzymałościowe betonów w porównaniu do betonu referencyjnego oraz do betonów zawierających w swoim składzie konwencjonalne dodatki (krzemionkowe i wapienne popioły lotne). W artykule przedstawiono wyniki badań wybranych właściwości (konsystencji, wytrzymałości na ściskanie, wytrzymałość na rozciąganie po 28 i 56 dniach dojrzewania, głębokości penetracji wody pod ciśnieniem) betonów zwykłych i betonów zawierających popioły lotne w ich składzie. Do wykonania próbek użyto cementu portlandzkiego CEM I 32,5 R i kruszywa naturalnego o uziarnieniu 0-16 mm. Beton z dodatkami został wykonany w pięciu partiach, w których popiół został dodany w ilości 5%, 10%, 15%, 20%, 30% masy cementu. Badania wykazały, poprawę parametrów wytrzymałościowych betonów zawierające popioły lotne z termicznego przekształcania osadów ściekowych.
Application of fly ash from combustion of municipal sewage sludge (FAMSS) in the concrete technology implements assumptions concerning the waste management adopted by the European Union. The study concerned the influence of partial replacement of the Portland cement by the ash on strength parameters of concrete in comparison to the reference concrete and concretes containing conventional admixtures (siliceous and calcareous fly ashes). The article presents the results of investigations on selected properties (consistency, water absorption, compressive strength and tensile strength after 28 and 56 days of curing, penetration depth) of ordinary concretes and concretes containing fly ash (calcareous and siliceous ash) from combustion of municipal sewage sludge. To make up the samples, the Portland cement CEM I 32,5 R and natural aggregate with graining of 0-16 mm were used. The concrete with siliceous and siliceous admixture was made in five lots to which the ash was added in the quantity of 5%, 10% 15%, 20% and 30% of the cement weight. The investigations have shown that the concretes containing fly ash from combustion of municipal sewage sludge have better strength parameters.
Źródło:
Rocznik Ochrona Środowiska; 2018, Tom 20, cz. 2; 1113-1128
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selecting recipes of cement slurry for sealing casing columns in wellbores used for CCS
Autorzy:
Formela, M.
Stryczek, S.
Wiśniowski, R.
Pikłowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/298986.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
cement sheath
cement slurry
cement corrosion
carbon capture and storage (CCS)
carbon dioxide
fly ashes
Opis:
Cement sheath serves primarily as a zonal isolation for the life of the well while protecting and supporting the casing. Nowadays, more and more solutions in the term of different cement slurries compositions appear on the market. One of them is application of fluid ashes as an alternative substitution of cement itself. The purpose of it is to overcome a challenging environment where a high concentration of corrosive gases or fluids exist. An example of that aggressive substance is carbon dioxide. Moreover, this is how it might reduce the cost of the cementing process. Laboratory research was conducted at the Drilling, Oil and Gas Faculty and Materials Science and Ceramics Faculty at AGH University of Science and Technology in Krakow.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 3; 609-618
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of The Properties of the Ash-Water Suspension of the Incinerated Sewage Sludge Ash (Issa)
Badania właściwości zawiesin popiołowo-wodnych z popiołów ze spalania komunalnych osadów ściekowych
Autorzy:
Kępys, W.
Pomykała, R.
Pietrzyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/318771.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
suspension technologies
fly ashes
municipal sewage combustion
technologie zawiesinowe
popioły lotne
spalanie komunalnych osadów ściekowych
Opis:
The article presents the results of a study on the possibility of the use of ash in suspension technologies applied in underground minEng. Suspensions are prepared with two types of ashes derived from different installations combusting municipal sewage sludge in fluidized bed boilers. Properties of suspension as well as ways of its use was determined in accordance with Polish Norm PN-G-11011:1998. The resulting suspensions did not meet the requirements concerning application in backfilling, and depending on their composition they may be used for insulation and caulking of gob.
W artykule przedstawiono wyniki badań nad możliwością wykorzystania popiołów lotnych w technologiach zawiesinowych stosowanych w górnictwie podziemnym. Zawiesiny sporządzono z dwóch popiołów pochodzących z różnych instalacji, spalających komunalne osady ściekowe w kotłach fluidalnych. Właściwości zawiesin jak i kierunek ich zastosowania określono zgodnie z Polską Normą PN-G- 11011:1998. Sporządzone zawiesiny nie spełniały wymagań dotyczących zastosowania w podsadzce zestalanej, natomiast w zależności od ich składu mogą być stosowane do izolacji i doszczelniania zrobów zawałowych.
Źródło:
Inżynieria Mineralna; 2014, R. 15, nr 1, 1; 205-212
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane właściwości mikrosfer z popiołów lotnych
Selected properties of cenospheres from fly ashes
Autorzy:
Strzałkowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/164727.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
mikrosfery
popioły lotne
morfologia
skład chemiczny
skład fazowy
cenospheres
fly ashes
morphology
chemical composition
phase composition
Opis:
W artykule przedstawiono wyniki badań próbki mikrosfer pozyskanych w jednej z zagranicznych elektrowni węglowych. Porównano je z wynikami badań mikrosfer pochodzących z popiołów lotnych z Elektrowni Łaziska. Omówiono podstawowe, istotne dla oceny przemysłowej, właściwości badanego materiału: uziarnienie, gęstość nasypową, skład chemiczny (zarówno składniki podstawowe, jak i wybrane metale ciężkie) oraz skład fazowy różnych klas ziarnowych mikrosfer. Zasygnalizowano możliwości dalszego wykorzystania badanego materiału.
This paper presents the results of the research of cenospheres produced in one foreign coal-burning power plant. They were compared with cenospheres obtained from fly ashes at Łaziska Power Plant. Essential properties of cenospheres, such as granular composition, bulk density, chemical composition (both basic components and selected heavy metals) as well as phase composition of different grain classes of the microspheres were described in the view of industrial assessment. The possibility of further use of the cenospheres was indicated.
Źródło:
Przegląd Górniczy; 2017, 73, 11; 37-43
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of fly ashes and sewage sludge on Fe, Mn, Al, Si and Co uptake by grass mixture
Autorzy:
Antonkiewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/125129.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
fly ashes
municipal sewage sludge
grass mixture
yield
Fe
Mn
Al
Si
Co
uptake
quantitative ratios
Opis:
Application of sewage sludge for environmental management of fly ashes landfill site affects chemical composition of plants. The aim of the present investigations was learning the effect of growing doses of municipal sewage sludge on the yield and uptake of Fe, Mn, Al, Si and Co by grass mixture used for environmental management of fly ashes landfill. The experimental design comprised of 5 objects differing by a dose of municipal sewage sludge supplied per 1 hectare: I. control, II. 25 t d.m., III. 50 t d.m., IV. 75 t d.m. and V. 100 t d.m. Application of sewage sludge resulted in the increase in yield. The content of analyzed elements in the grass mixture depended significantly on sewage sludge dose. Increasing doses of sewage sludge caused marked increase in Mn and Co contents, while they decreased Fe, Al and Si contents in the grass mixture. It was found that growing doses of sewage sludge caused an improvement of Fe to Mn ratio value in the grass mixture. Assessing the element content in the grass mixture in the view of forage value, it was found that Fe and Mn content did not meet the optimal value. Si content in plants was below the optimal value.
Źródło:
Journal of Ecological Engineering; 2014, 15, 3; 6-13
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kruszywo z drobnoziarnistych odpadów niebezpiecznych
Manufacture of artificialaggregates using fine-grained hazardous wastes
Autorzy:
Kępys, W.
Powiązania:
https://bibliotekanauki.pl/articles/400188.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
termiczne przekształcanie odpadów
popioły lotne
granulacja
kruszywa sztuczne
thermal treatment of wastes
fly ashes
granulation
artificial aggregates
Opis:
W wyniku termicznego przekształcania odpadów powstają odpady drobnoziarniste w postaci popiołów lotnych i żużli, które w większości poddawane są składowaniu. W procesie granulacji wytworzono z nich kruszywa. W artykule przedstawiono wyniki badań wybranych właściwości fizykochemicznych powstałych kruszyw, wyniki badań wytrzymałości na ściskanie wytworzonych betonów oraz wpływ betonu na środowisko wodne.
Fine-grained solid residues (fly ashes and bottom ashes) are formed as a result of thermal treatment of wastes. Most ofthem are landfilI disposed. Thus, to reuse them, artificial aggregates have been tried to be produced by granulation. The aim ofthis paper is to present results of selected research chemical and physical properties of such artificial aggregates, compression strength of concrete and influence of water environment.
Źródło:
Inżynieria Ekologiczna; 2010, 23; 70-76
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność siarczanowa napowietrzonych zapraw cementowych z dodatkiem popiołów lotnych
Sulphate resistance of air entrained mortars with admixture of fly ashes
Autorzy:
Jaworska, M.
Powiązania:
https://bibliotekanauki.pl/articles/390618.pdf
Data publikacji:
2015
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
korozja siarczanowa
zaprawy napowietrzone
pory powietrzne
popioły lotne
sulphate attack
air voids
air entrainment
mortars
fly ashes
Opis:
W artykule przedstawiono wyniki badań wytrzymałości, ekspansji w roztworze Na2SO4, dyfrakcji rentgenowskiej oraz mikroskopii skaningowej zapraw napowietrzonych i nienapowietrzonych z dodatkiem popiołu lotnego krzemionkowego i wapiennego. W roztworze Na2SO4 napowietrzone zaprawy uległy szybszej ekspansji i rozpadowi niż zaprawy nienapowietrzone. W zaprawach napowietrzonych wykryto większą ilość ettringitu, który występował w porach powietrznych i w mikrostrukturze zaczynu oddalonego od porów. Zastąpienie 20% cementu popiołami lotnymi przyniosło znaczącą poprawę odporności zapraw na korozję siarczanową. Zaprawy z popiołem wapiennym wykazały najmniejsze odkształcenia i największą trwałość. We wszystkich zaprawach produktami korozji siarczanowej były gips i ettringit.
The effects of entrained air on sulphate resistance of fly ash blended cements mortars long term immersed in Na2SO4 solution were investigated. The expansion strains and decrease in strength of air entrained mortars were faster than those of non-air entrained ones. It was found with SEM and XRD analyses that ettringite and gypsum were the main sulfate attack products. The SEM studies of mortars microstructure showed that the highest amount of ettringite observed occurred in air voids partially filled with this phase. The sulphate resistance of AE and nAE mortars containing high or low calcium fly ash blended cements was significantly higher compared to plain OPC mortar.
Źródło:
Budownictwo i Architektura; 2015, 14, 1; 43-52
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies