Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "ferrite" wg kryterium: Temat


Tytuł:
Structure and Properties of the S49 Rail after a Long Term Outdoor Exposure
Autorzy:
Konieczny, Jarosław
Labisz, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2172345.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
microstructure
perlite
ferrite
hardness
Opis:
The subject of the research in this work was the S49 rail made of R260 rail steel (1.0623). The carried out investigations concern microstructure tests and tests of mechanical properties of rails after several years of exposure in the open air without usage. The purpose of the work was to determine on the basis of the results of research the possibilities of using the tested rail for usage and application for the construction of tracks on railway sidings. For investigations there were used diverse techniques reaching such engineering materials investigations like light or scanning electron microscope for microstructure investigations, as well as hardness and microhardness test were performed for determinations of the microstructural changes occurred in the upper area of the rails surface. The microstructure changes concerns especially the ferritic and pearlitic structure and the breaks in the present carbide mesh. During investigations it was found out that the tested railway rails are fully useful for application, after machining to achieve required dimensional parameters. It is also of high importance, of the economical point of view, that their price, also in case of earlier installation of the rails, may be lower than the current price offered on the marked for a entire new product. The price difference reaches dimensions in the range of 5% - 10%.
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 2; 280--290
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Combined Influence of Molybdenum and Nickel in Steel Welds
Autorzy:
Szczucka-Lasota, B.
Węgrzyn, T.
Kurc-Lisiecka, A.
Piwnik, J.
Powiązania:
https://bibliotekanauki.pl/articles/352371.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
welding
steel
ferrite
impact toughness
Opis:
Weld metal deposit (WMD) was carried out for standard MMA welding process. This welding method is still promising mainly due to the high amount of AF (acicular ferrite) and low amount of MAC (self-tempered martensite, retained austenite, carbide) phases in WMD. That structure corresponds with good impact toughness of welds at low temperature. Separate effect of these elements on the mechanical properties of welds is well known, but the combined effect of these alloy additions has not been analyzed so far. It was decided to check the total influence of nickel with a content between 1% to 3% and molybdenum with content from 0.1% up to 0.5%.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1087-1091
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and electromagnetic properties of microwave sintered CoCuZn ferrites
Autorzy:
Patankar, K. K.
Powiązania:
https://bibliotekanauki.pl/articles/411554.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
ferrite
microwave sintering
Microstructure
electromagnetic
inductors
Opis:
Co-Cu-Zn ferrite material has been extensively used in multilayer chip inductors because of their good electromagnetic properties at higher frequencies and low sintering temperatures. In this research work, a comparative study on Co-Cu-Zn ferrite prepared from two different routes is reported. The two different routes are conventional ceramic sintering method (CS) and is microwave sintered (MS) method. The former route is most commonly used while the latter one is now gaining popularity in sintering processes. The work highlights that the sintering temperature and time were significantly reduced from 4 h and 1250 °C for the CS process to 20 min and 900 °C for MS process. Moreover, microwave sintering also improves the physical and electromagnetic properties of ferrite.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 1; 1-8
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and magnetic properties of cobalt ferrite nanopowders synthesis using contact non-equilibrium plasma
Autorzy:
Frolova, L.
Derimova, A.
Butyrina, T.
Powiązania:
https://bibliotekanauki.pl/articles/1052775.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
nanomaterials
cobalt
ferrite
Fe/Co molar ratio
Opis:
Different grades of magnetic cobalt ferrite (Co_xFe_{3-x}O₄) nanoparticles were synthesized with various molar ratios of Fe²⁺ to Co²⁺ ions in the initial salt solutions method with using contact non-equilibrium plasma. The crystal structure and morphology of the nanoparticles are obtained from X-ray diffraction and transmission electron microscopy studies. With an increase in the value of x, the saturation magnetization for the samples of CoFe₂O₄ has decreased from 150.9 emu/g to 1.2 emu/g. The dependence of the coercive force on x is extremal with a plateau maximum corresponding to the x=0.5-1.25.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 1021-1023
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Promotion of iron-oxide with potassium as optimization of the soot combustion catalyst
Autorzy:
Legutko, P.
Stelmachowski, P.
Kotarba, A.
Powiązania:
https://bibliotekanauki.pl/articles/115602.pdf
Data publikacji:
2012
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
soot combustion
promotion
potassium
iron
ferrite
catalyst
Opis:
In this work the effect of potassium addition to iron oxides (FeO, Fe3O4, Fe2O3) as catalysts for soot combustion was investigated. While the addition of potassium by impregnation had positive effect on all oxides the strength of this effect varied considerably. Comparison with potassium ferrites (K2Fe22O34, KFeO2), with potassium as a part of a crystal lattice, proved that they were more active than unpromoted oxides. The determined range of activity was as follows: FeO < Fe3O4 Fe2O3 K/Fe34 ~ K2Fe22O34 K/Fe2O3 K/FeO ~FeO2.
Źródło:
Challenges of Modern Technology; 2012, 3, 2; 9-11
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathemathical Equations of the Influence of Molybdenum and Nitrogen in Welds
Autorzy:
Węgrzyn, T.
Kamińska, J.
Piwnik, J.
Stanik, Z.
Powiązania:
https://bibliotekanauki.pl/articles/352317.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
welding
steel
micro-jet
ferrite
impact toughness
equations
Opis:
The paper offers mathematical equations of the influence of micro-jet cooling on structure and impact toughness properties of metal weld deposit. Weld metal deposit (WMD) was carried out for standard MIG welding and for MIG welding with micro-jet cooling. This new method is very promising mainly due to the high amount of AF (acicular ferrite) and low amount of MAC (selftempered martensite, retained austenite, carbide) phases in WMD. That structure corresponds with very good mechanical properties ie. good impact toughness of welds at low temperature. Micro-jet cooling after welding can find serious application in automotive industry very soon. Until that moment only argon, helium, nitrogen and gas mixtures of argon were tested for micro-jet cooling after welding. The best results of mechanical properties of WMD in presented welding method correspond with micro-jet argon cooling.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 83-86
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
To Study the Microstructural Evolution of EN353 Steel under Different Heat Treatment Conditions
Autorzy:
Sharma, Lochan
Chaubey, Sandeep Kumar
Powiązania:
https://bibliotekanauki.pl/articles/27313870.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
CCT curves
cooling rate
heat treatment
bainite
ferrite
pearlite
microstructure
Opis:
Steel is basically used in construction, automobile, buildings, infrastructure, tools, ships, appliances, machines and weapons due to its good mechanical as well as metallurgical properties. Heat treatment of steels significantly enhance its mechanical and metallurgical properties due to the formation of various phases depending upon the type of steel used for specific application. In present study, blank of EN353 grade steel having different sizes were used to investigate the effect of heat treatment and microstructural changes. JMat-Pro software was used to predict the continuous cooling transformation behaviour of EN353 steel. Different phases such as bainite, perlite and other carbide inclusion can be observed in the microstructural examination. Pearlitic microstructure developed for the specimen of size 40×40×40 mm heated at 870°C for 2 hrs and then isothermal heating was performed for same specimen at 600°C for 73 min followed by air cooling. Relevance Statement: Steel is an important material which is frequently used in almost all areas such as structure building, pressure vessels, transportation and many more other applications. Addition of alloying elements in parent steel significantly improve the metallurgical as well as mechanical properties. Steel properties like tensile strength, toughness, ductility, corrosion resistance, wear resistance, hardness, hot hardness, weldability, fatigue etc. significantly improved with the addition of alloying and heat treatment. Heat treatment processes can be used to improve the properties of steel which are frequently used in many manufacturing industries. Different grades of steels which are heat treated under a set of sequence of heating and cooling to change their physical and mechanical properties so that it can fulfil its function under loading condition. With the help of heat treatment process desired microstructure has been achieved which exhibit good mechanical properties of steels.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 2; 423--430
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The quality of the joint between alloy steel and unalloyed cast steel in bimetallic layered castings
Autorzy:
Wróbel, T.
Powiązania:
https://bibliotekanauki.pl/articles/382487.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odlew warstwowy
staliwo
austenit
ferryt
perlit
layered casting
cast steel
austenite
ferrite
pearlite
Opis:
In paper is presented technology of bimetallic layered castings based on founding method of layer coating directly in cast process so-called method of mould cavity preparation. Prepared castings consist two fundamental parts i.e. bearing part and working part (layer). The bearing part of bimetallic layered casting is typical foundry material i.e. ferritic-pearlitic unalloyed cast steel, whereas working part (layer) is plate of austenitic alloy steel sort X2CrNi 18-9. The ratio of thickness between bearing and working part is 8:1. The aim of paper was assessed the quality of the joint between bearing and working part in dependence of pouring temperature and carbon concentration in cast steel. The quality of the joint in bimetallic layered castings was evaluated on the basis of ultrasonic non-destructive testing, structure and microhardness researches.
Źródło:
Archives of Foundry Engineering; 2012, 12, 1; 119-124
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of selected cast parameters on quality of joint in layered castings
Autorzy:
Wróbel, T.
Cholewa, M.
Powiązania:
https://bibliotekanauki.pl/articles/382816.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odlew warstwowy
staliwo
austenit
ferryt
perlit
layered casting
cast steel
austenite
ferrite
pearlite
Opis:
In paper is presented technology of bimetallic layered castings based on founding method of layer coating directly in cast process so-called method of mould cavity preparation. Prepared castings consist two fundamental parts i.e. bearing part and working part (layer). The bearing part of bimetallic layered casting is typical foundry material i.e. unalloyed cast steel, whereas working part is plate of austenitic alloy steel sort X2CrNi 18-9. The ratio of thickness between bearing and working part is 8:1. The aim of paper was assessed the quality of the joint between bearing and working part in dependence of pouring temperature and carbon concentration in cast steel. The quality of the joint in bimetallic layered castings was evaluated on the basis of ultrasonic non-destructive testing, structure and microhardness researches.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2; 105-110
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Content of δ Ferrite in Pulse-Arc Welded Steel 304
Autorzy:
Gucwa, M.
Bęczkowski, R.
Grzyb, A.
Powiązania:
https://bibliotekanauki.pl/articles/380266.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel
ferrite
welding arc
Schaeffler diagram
stal nierdzewna
ferryt
spawanie
diagram Schaefflera
Opis:
The paper presents the results of research on the effect of the welding arc type on the content of δ ferrite, in the welded joint of 304 grade stainless steel. Based on the commonly used Schaefler diagram, the content of δ ferrite in the welded joint was estimated, and then these results were verified by comparing them with results obtained on specimens welded by different welding arc types, including the pulse arc. The obtained investigation results indicate some discrepancies between calculations made by analytical methods and the fraction of δ ferrite measured on the prepared specimens.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1 spec.; 131-134
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Segregation of elements in corrosion resistant castings of diversified wall thickness
Segregacja pierwiastków w odlewach kwasoodpornych o zróżnicowanych grubościach ścianek
Autorzy:
Malatyńska, P.
Powiązania:
https://bibliotekanauki.pl/articles/351137.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
segregation of elements
stainless steel
ferrite
carbides
segregacja pierwiastków
stal nierdzewna
ferryt
węgliki
Opis:
The segregation of elements in two corrosion resistant cast steel grades Cr18-Ni9-Mo, in castings of wall thickness: 7, 15 and 30 mm were performed. The results indicate the analogous path of curves of the content of Fe, Cr, Ni, Mo and C, in walls of various thickness. Decrease in the content observed in the delta ferrite Fe (2 to 3 wt. %), Ni (from 3.5 to 5 wt. %) and C (about 1 wt. %), where the Mo and Cr increased their content of 2% wt. %, and about 6% wt. respectively in the case of the two test cast. For the test steel Q2 with a carbon content 0.054 wt. % were found carbides in the form of white precipitates on the grain boundary of delta ferrite. This resulted in the occurrence of the peaks in the lines of the element distribution analysis especially for molybdenum, iron and carbon, as shown in the diagrams for various segregation of wall thickness.
Zbadano segregację pierwiastków w dwóch gatunkach staliwa kwasoodpornego Cr18-Ni9-Mo, bezpośrednio w odlewach o grubościach ścianek 7, 15 i 30 mm. Wyniki wskazują, analogiczny przebieg krzywych zawartości Fe, Cr, Ni, Mo i C, zebranych w różnych grubościach ścianek. Spadek zawartości odnotowano w ferrycie delta dla Fe (od 2 do 3% wag.), Ni (od 3,5 do 5% wag.) oraz C (około 1%), natomiast w przypadku Mo oraz Cr stwierdzono wzrost zawartości o odpowiednio 2% wag. i około 6% wag., w przypadku dwóch badanych staliw. Dla badanego staliwa Q1 o zawartości węgla 0,054% wag. stwierdzono występowanie węglików w postaci białych wydzieleń na granicy ferrytu delta. Spowodowało to występowanie pików na linii analizy rozkładu pierwiastków zwłaszcza dla molibdenu, zelaża oraz węgla, co zostało uwidocznione na wykresach segregacji dla różnych grubości ścianek.
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 3; 775-778
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prediction of Ferrite Content in Austenitic Cr-Ni Steel Castings During Production
Autorzy:
Senberger, J.
Pernica, V.
Kana, V.
Zadera, A.
Powiązania:
https://bibliotekanauki.pl/articles/380650.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solidification
metallography
austenitic steel
austenite
ferrite
DeLong diagram
krzepnięcie
metalografia
stal austenityczna
austenit
ferryt
diagram DeLong
Opis:
Determination of the ferrite content in austenitic steels, which solidified under defined conditions. Ferrite content in austenitic matrix was determined from samples with wall thickness of 60 mm. Measured ferrite contents served to propose the regression equations for the calculation of the ferrite content in steels with Cr content of 18 up to 22 % and Ni of 9 up to 11 %. An additional regression equation was proposed for steels with a higher Ni content. The proposed regression equations have been checked up on the operating melts. In conclusion, the ferrite content in the axis of the casting of wall thickness of 500 mm has been calculated and it was compared to the ferrite determined in the usual way from the cast-on test.
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 91-94
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examination and elimination of defects in cone casting made of ductile cast iron
Autorzy:
Guzik, E.
Łagowski, M.
Nowak-Dudek, A.
Niedzielski, B.
Powiązania:
https://bibliotekanauki.pl/articles/380013.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ductile iron
cone casting
casting defect
ferrite
pearlite
graphite
żeliwo sferoidalne
stożek odlewniczy
wada odlewu
ferryt
perlit
grafit
Opis:
In the scope of existing cooperation with the Foundry of Cast Iron ZM “WSK Rzeszów” Ltd. there was carried out research work of microstructure and mechanical properties in the walls of a cone casting made of ductile cast iron. The particular attention was being put to the search of the potential brittle phases which have deleterious effect on ductility and dynamic properties of highly strained use of the casting prone to the potential risk of cracks during the highly strained use.
Źródło:
Archives of Foundry Engineering; 2013, 13, 4; 43-48
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ausferritic Microstructure Phase Analysis in Ductile Iron
Autorzy:
Trzaskowski, W.
Nawrocki, P.
Łukasik, K.
Myszka, D.
Powiązania:
https://bibliotekanauki.pl/articles/381436.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
image analysis
ausferritic ductile iron
x-ray diffraction
austenite
ferrite
analiza obrazu
żeliwo sferoidalne
dyfrakcja rentgenowska
austenit
ferryt
Opis:
Image analysis allows to acquire a number of valuable quantitative informations on the observed structure and make appropriate conclusions. So far, a large part of analyzed images came only from light microscopes, where it was a possibility of accurately distinguish the different phases on the plane. However, the problem happened in the case of the observation of images obtained by scanning electron microscopy. In this case, the presence of various shades of gray, and the spaciousness of the image attained. To perform the analysis the matrix images of the ausferritic ductile iron were used. Full analysis was carried out using the computer program MicroMeter 1.03. Results obtained in the analysis were related directly to the results from X-ray diffraction. Obtained as a result of the analysis were related directly to the results from X-ray diffractometer. The following technique has weaknesses, including the misinterpretation by the operator microscope or program. After all, it was possible to obtain similar results to the result that has been obtained from X-ray diffractometer.
Źródło:
Archives of Foundry Engineering; 2018, 18, 2; 112-116
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of plastic deformation carbon steel on the process of burning electric arc
Autorzy:
Vakulenko, Igor Alex
Plitchenko, Sergey
Kurt, Bulent
Askerov, Hangardas
Proydak, Svetlana
Erdogdu, Ahmet Emrah
Powiązania:
https://bibliotekanauki.pl/articles/2091226.pdf
Data publikacji:
2021
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
substructure
density dislocation
electric current
plastic deformation
cementite
ferrite
podbudowa
dyslokacja gęstości
prąd elektryczny
deformacja plastyczna
cementyt
ferryt
Opis:
During a study of the combustion process of a direct polarity electric arc, a directly proportional dependence of the electric current value on the degree of cold plastic deformation of carbon steel used as an electrode was found. To calculate the value of the electric current during arc burning, in the indicated ratio, it was proposed to replace the surface tension force of the liquid metal with the surface tension of ferrite of plastically deformed carbon steel. Calculation of the ferrite’s surface tension value on the deformation degree of the steel under study through the size of the coherent scattering regions was used to explain the observed dependence of the electric current during arc burning. From the analysis of the considered correlation ratios, it was found that with an increase in the cold deformation degree, the refinement of the coherent scattering regions results in the ferrite’s surface tension increase and consequently, to an increase in the electric current during arc burning. Comparative analysis of the obtained results of calculating the value of electric current during arc burning through the surface tension of ferrite of cold-deformed carbon steel showed a fairly good coincidence with experimental data. The differences did not exceed 9%.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2021, 112; 211--218
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies