Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Real Driving Emissions" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Cold start emissions of passenger cars with gasoline and diesel engines in Real Driving Emissions tests
Autorzy:
Pielecha, Jacek
Merkisz, Jerzy
Kurtyka, Karolina
Skobiej, Kinga
Powiązania:
https://bibliotekanauki.pl/articles/133895.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
Real Driving Emissions
emisja spalin
samochody osobowe
rzeczywiste emisje z jazdy
Opis:
Modernization of passenger cars and constant development of existing legislation lead to a reduction of exhaust emissions from these vehicles. In accordance with package 3 of the RDE test procedure, the European Commission has extended testing methods by including exhaust emissions during a cold start. The article compares the research results on the impact of ambient temperature during the cold start of spark-ignition and compression-ignition engines in road emission tests. The tests were carried out in line with the requirements of the RDE test procedure for passenger cars meeting the Euro 6d-Temp emissions standard. The obtained results were analyzed, i.e. there were compared the engine and vehicle operation parameters and the values of road exhaust emissions, during the cold start of gasoline and diesel engines at the ambient temperature of approximately 25°C. The summary presents the share of cold start phase of a passenger car (at the ambient temperature of around 25°C) for each exhaust emission compound in the urban part of the test, and in the entire RDE test, depending on the engine type used.
Źródło:
Combustion Engines; 2019, 58, 4; 160-168
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of ecological extremes of vehicles in road emission tests
Autorzy:
Pielecha, Jacek
Skobiej, Kinga
Powiązania:
https://bibliotekanauki.pl/articles/1833638.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
exhaust emission
passenger cars
real driving emissions
optimization
emisja spalin
samochody osobowe
badania emisji spalin
optymalizacja
Opis:
New testing procedures for determining road emissions of exhaust pollutants for passenger vehicles were established in 2018. New road testing procedures are designed to determine actual exhaust emissions, which may not always reflect laboratory emissions. Test procedures for the emission of pollutants in real traffic conditions are divided into four stages. The latest research on the emission of pollutants from motor vehicles in road traffic conditions, carried out using mobile measuring systems, reflects the actual ecological state of vehicles. The article compares the results of exhaust emissions obtained in road tests using the latest legislative proposals for passenger cars. Then, an attempt was made to determine the engine operating parameters in which exhaust road emission would be the lowest. Solution scenarios were defined as part of permissible changes to dynamic parameters that are included in European legislation on RDE testing. For this purpose, an optimization tool was used, allowing on the basis of given input data to determine the minimum objective function, defined as the smallest emission value of individual harmful compounds. The results of the exhaust gas emissions in the RDE test were used to determine the road emissions of individual harmful compounds. A thorough analysis of the emission intensity of individual compounds has shown that it is possible to approximate such values using functional rela-tionships or adopting them as a constant value. This division was used to determine the extremes (in this case the minima) of the objective function (minimum road emissions of harmful exhaust components). This task resulted in obtaining (within the permissible tolerances of all driving parameters and durations of individual road test sections) the value of exhaust emissions in the range from 26% to 81% lower than in the actual road test. This means that there is a tolerance range, where you can obtain the value of emissions in road tests. As a result, you can use the process of determining the minimum emissions tests RDE calibration of the drive units already at the stage of preparation so that in the real traffic conditions characterized by the lowest exhaust emissions.
Źródło:
Archives of Transport; 2020, 56, 4; 33-46
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of pollutant emissions and fuel consumption for the use of a multi-storey carpark
Autorzy:
Andrzejewski, Maciej
Nowak, Mateusz
Woch, Aleksandra
Stefańska, Natalia
Powiązania:
https://bibliotekanauki.pl/articles/2097593.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
real driving emissions
exhaust emissions
fuel consumption
energy consumption
parking
rzeczywista emisja cząstek
emisja spalin
zużycie paliw
zużycie energii
parkowanie
Opis:
In Poland, the number of vehicles owned per capita is systematically increasing. There is also a noticeable increase in traffic in large urban agglomerations. This creates a number of problems, such as difficulties in finding a parking spot. Then it becomes necessary to search for a long time to stop, which is correlated with higher emission of harmful substances and energy consumption. The aim of the work is a multi-criteria analysis of the selection of a parking spot at a shopping center focused on travel times, pollutant emissions and fuel consumption. In addition, consideration was given to the selection of the optimal parking spot. The tests were carried out in Real Driving Conditions similar to Real Driving Emissions testing. The procedure, currently used as an extension of the type-approval tests, reflects the actual exhaust emissions from vehicles more accurately than tests under laboratory conditions. Specialized PEMS (Portable Emissions Measurement System) apparatus was used for the measurements.
Źródło:
Combustion Engines; 2021, 60, 4; 46--51
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of vehicle dynamic parameters on the exhaust emissions in RDE tests
Autorzy:
Pielecha, J.
Kurtyka, K.
Skobiej, K.
Powiązania:
https://bibliotekanauki.pl/articles/133633.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
road tests
Real Driving Emissions
emisja spalin
samochody osobowe
testy drogowe
rzeczywiste warunki emisji
Opis:
The article compares driving test data using the latest legislative proposals applicable to passenger cars with different drives. For this purpose, cars of one type were selected, meeting the same exhaust toxicity standard (Euro 6c) and differing in used internal combustion engines (with spark-ignition, compression-ignition and hybrid drive). Several measurements were performed on the same test route in accordance with the RDE test guidelines, which requires a several of criteria to be met. These criteria include the length of the measuring sections, their overall timeshare and the dynamic characteristics of the drive. A portable emissions measurement system (PEMS) was used to record the engine and vehicle operating parameters and to measure the exhaust emissions during tests. This allowed for the monitoring of parameters such as: load value, engine speed and vehicle velocity. Then the obtained results were analyzed for their compatibility with the RDE procedure requirements. By determining the road emission of individual harmful compounds for all vehicles and the dynamic parameters of drive (relative positive acceleration and product of speed and positive acceleration) in various phases of the road test it was possible to compare them. On this basis, the impact of dynamic conditions of road tests on the obtained results of the road exhaust emission of harmful compounds for passenger cars with various drives was defined.
Źródło:
Combustion Engines; 2018, 57, 4; 26-34
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Observations from PEMS testing of combustion engines of different applications
Autorzy:
Merkisz, J.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133975.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
road tests
Real Driving Emissions
emisja spalin
samochody osobowe
testy drogowe
rzeczywista emisja cząstek
Opis:
The article compares data obtained in road tests with the latest legislative proposals relating to various applications of internal combustion engines. Passenger car emission tests have been performed several times on the same test route in accordance with the RDE procedure guidelines, for which a dozen or so criteria must be met, including the distance of each of the drive sections, their in the drive time and the dynamic characteristics of the drive. The analysis was also based on a two-dimensional operating density characterization, presented in the vehicle speed-acceleration coordinates. As a result, it was possible to compare dynamic properties, operating time density and, thus, to check the validity of conducted drive tests in terms of their feasibility and emission values. An exhaust emission related comparison of three types of powertrain have been presented: gasoline, diesel and hybrid in the RDE tests. The authors proposed a new form of presenting the road exhaust emissions results in relation to the carbon dioxide emission, referred to as a standardization of the emission results. The exhaust emissions from city buses fitted with different powertrains tested on an actual bus route and in the SORT test were also compared.
Źródło:
Combustion Engines; 2018, 57, 3; 40-55
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Passenger cars and heavy duty vehicles exhaust emissions under real driving conditions
Autorzy:
Merkisz-Guranowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/223645.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
passenger cars
heavy duty vehicles
exhaust emissions
vehicle testing
real driving emissions
samochody osobowe
pojazdy ciężarowe
emisja spalin
badania pojazdu
warunki jazdy
Opis:
In the assumptions regarding to the transport policy both at the level of country and Europe there is the concept of sustainable development of transport. Warsaw University of Technology in cooperation with Poznan University of Technology performs research work concerning the shaping of environmentally friendly transport system – Project EMITRANSYS. In this project, one of the conditions is to reduce exhaust emissions by means of transport. The paper presents the reasons for the testing of the exhaust emissions under Real Driving Emissions testing (RDE). Research potential of Institute of Combustion Engines and Transport at Poznan University of Technology in the area of road testing of passenger and heavy-duty vehicles has been presented in the paper. Example test results have been shown in the aspect of the emission-related classification of vehicles.
Źródło:
Archives of Transport; 2014, 31, 3; 47-59
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of the use of comfort devices on the exhaust toxic compounds from a modern PC car with spark ignition engine
Autorzy:
Siedlecki, Maciej
Merkisz, Jerzy
Dobrzyński, Michał
Kubiak, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/2097654.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
real driving emissions
RDE
combustion engine
comfort devices
emisja spalin
rzeczywiste emisje z jazdy
silnik spalinowy
urządzenia zwiększające komfort
Opis:
The use of comfort systems, the number of which in vehicles is constantly increasing, has a direct impact on fuel consumption and engine load. As part of the article, the vehicle's drive in real operating conditions was analyzed in terms of the emission of toxic compounds. The tests were carried out without and with the systems turned on, using the PEMS apparatus, where road emissions of carbon dioxide, carbon monoxide, hydrocarbons, nitrogen oxides and solid particles were measured in terms of mass, number and size distribution of diameters. The track was driven four times with different setting of the powertrain of examined car. The differences concerned the number of comfort systems in the vehicle and the mode of operation of the combustion engine.
Źródło:
Combustion Engines; 2022, 61, 3; 50--55
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current directions in LD powertrain technology in response to stringent exhaust emissions and fuel efficiency requirements
Autorzy:
Bielaczyc, P.
Woodburn, J.
Powiązania:
https://bibliotekanauki.pl/articles/133923.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
silnik LD
technologia napędowa
emisja spalin
normy emisji
WLTP
RDE
rzeczywista emisja cząstek
LD engines
powertrain technology
exhaust emissions
emissions standards
Worldwide harmonized Light vehicles Test Procedures
Real Driving Emissions
Opis:
The major global automotive markets have all set limits for exhaust emissions from new road vehicles, which have become increasingly stringent over the past few decades. There is also considerable pressure to reduce fuel consumption and CO2 emissions – around 80% of all new passenger cars sold globally are subject to some kind of energy efficiency regulation. Such legal requirements necessitate extensive R&D and testing and the entire field is undergoing a period of rapid change. Despite a recent trend towards harmonisation, at present significant regional differences exist, which vary from the analytical laboratory methods specified, the list of regulated pollutants, the numerical values of the emissions limits and the test cycles employed for engine and chassis dynamometer testing of vehicles and their powertrains. Here the key points are reviewed and strategies and technologies employed to deal with these emissions challenges are discussed. Incoming automotive emissions regulations including the WLTP and Real Driving Emissions are discussed and in conclusion likely directions in powertrain technology are identified.
Źródło:
Combustion Engines; 2016, 55, 3; 62-75
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trends in automotive emissions, fuels, lubricants, legislation and test methods –a global view, with a focus on the EU & US – summary of the 5th International Exhaust Emissions Symposium (IEES)
Autorzy:
Bielaczyc, P.
Woodburn, J.
Gandyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/132954.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emissions
emission standards
RDE
Real Driving Emissions
WLTP
Worldwide harmonized Light vehicles Test Procedures
WLTC
biofuel
exhaust aftertreatment systems
fuel
lubricant
emisja spalin
standardy emisji
rzeczywista emisja cząstek
biopaliwa
system oczyszczania spalin
paliwo
olej
Opis:
The field of vehicular exhaust emissions is experiencing wide-ranging and rapid changes. Air quality is very high on the political agenda and pressure remains to limit and reduce greenhouse gas emissions from the road transport sector. In addition to limits being increasingly stringent, the list of parameters subject to legal limits are slowly expanding – and, most importantly, these limits must be met under a wide wide range of conditions. A range of strategies are available to overcome these difficulties, which was explored during the 5th International Exhaust Emissions Symposium (IEES) hosted at BOSMAL in May 2016. This paper reports and summarises the topics of the 5th IEES and attempts a synthesis on the current status of the field and what the coming years may hold for the automotive and fuel industries and other allied fields.
Źródło:
Combustion Engines; 2016, 55, 3; 76-82
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of rail vehicles exhaust emissions
Autorzy:
Kamińska, Michalina
Kołodziejek, Daniel
Szymlet, Natalia
Fuć, Paweł
Grzeszczyk, Rafał
Powiązania:
https://bibliotekanauki.pl/articles/2097647.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
rail vehicles
real driving emissions
RDE
portable emission measurement system
PEMS
non-road mobile machinery
NRMM
emisja spalin
pojazdy szynowe
rzeczywista emisja cząstek
przenośne systemy pomiaru emisji
pozadrogowe maszyny ruchome
Opis:
The basic problem in terms of measuring exhaust emissions is the approval tests of traction vehicles, which are carried out on engine dynamometers. Therefore, it is impossible to obtain reliable results concerning their actual impact on the natural environment. It is therefore advisable to carry out the tests in real operation conditions, as is the case for road vehicles for which RDE (Real Driving Emissions) tests are carried out. The latest Stage V emission standards push for the introduction of this type of test, but no limit values for toxic exhaust gases have been established and no test guidelines have been defined for assessing actual emissions. This article describes the issues related to the legislative guidelines for non-road vehicles in force in Europe, as well as the measurement tools used, such as mobile equipment for measuring emissions of PEMS (Portable Emissions Measurement Systems) and newly developed emission gates. Additionally, the paper presents examples of locomotive exhaust emission tests in real operating conditions. The aim of the measurements was to assess the emission of toxic compounds against the relevant standards. The subject of the research was a diesel locomotive type T448.P equipped with a modernized internal combustion engine.
Źródło:
Combustion Engines; 2022, 61, 2; 10--17
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies