Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "EV" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
Examination and assessment of electric vehicles’ operational safety
Badania i ocena bezpieczeństwa użytkowania samochodów elektrycznych
Autorzy:
Łukjanow, S.
Zieliński, W.
Powiązania:
https://bibliotekanauki.pl/articles/1363722.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
electric vehicle
tests of electric vehicle
safety of electric vehicle
samochody elektryczne
badania pojazdów EV
bezpieczeństwo pojazdów EV
Opis:
Increasingly stringent environmental protection requirements and the implementation of the most modern technologies compel automotive manufacturers to develop the production of environment-friendly vehicles with electric drive systems. In difficult road conditions, vehicle participants are exposed to various hazards, especially to health and life. This forced the Automotive Industry Institute (PIMOT) to attack the important problem named “Electric Vehicles’ Operational Safety (EVOS)”, which is related to a number of new issues, not sufficiently explored yet. The tests carried out until now on electric vehicles to check their conformity with the Regulations and Directives in force do not cover many issues that were identified within this project as having an important impact on vehicle riding safety and comfort. This work included the formulation and implementation of a three-level EVOS examination and assessment concept. This article presents results of comparative testing and assessment of the EVOS level for four electric vehicles, i.e. Mega E-City, Citroen C-Zero (Mitsubishi i-MiEV car manufactured by Citroen under a licence), Renault Fluence, and Opel Ampera. The presented results of testing the sample electric vehicles show how much the vehicles differ from each other and how much work still has to be done for improvement of the safety of their operation. Based on the work results, detailed EVOS assessment criteria may be prepared.
Wzrastające wymagania ochrony środowiska oraz wdrażanie najnowszych technologii powodują, że koncerny samochodowe rozwijają produkcję aut z napędem elektrycznym przyjaznych dla środowiska. Trudne warunki drogowe powodują, że kierowcy i pasażerowie pojazdów są narażeni na liczne zagrożenia, szczególnie ich zdrowia i życia. Spowodowało to konieczność podjęcia w PIMOT ważnego problemu Bezpieczeństwa Użytkowania Samochodów Elektrycznych (BUSE), w którym występują nowe dotychczas nierozpoznane zagadnienia. Dotychczas stosowane badania pojazdów EV na zgodność z Regulaminami lub Dyrektywami nie obejmują szeregu zagadnień, które zostały opracowane w trakcie wykonywania pracy a szczególnie wpływających na bezpieczeństwo i komfort jazdy. W pracy przedstawiono i zrealizowano trzystopniową koncepcję badań i oceny BUSE. W pracy przedstawiono wyniki badań porównawczych i ocenę BUSE czterech samochodów elektrycznych: Mega E-city, Citroen C-zero (licencja Mitsubishi iMiEV), Renault Fluence i Opel Ampera. Wyniki badań przedstawionych pojazdów EV wykazują jak bardzo te pojazdy różnią się między sobą i jak dużo jeszcze jest do zrobienia dla poprawy ich bezpieczeństwa użytkowania. Na podstawie wyników pracy mogą być opracowane szczegółowe kryteria BUSE.
Źródło:
Archiwum Motoryzacji; 2016, 74, 4; 59-82
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electromagnetic compatibility testing of electric vehicles and their chargers
Testowanie samochodów elektrycznych oraz ich ładowarek pod kątem kompatybilności elektromagnetycznej
Autorzy:
Chudy, Aleksander
Stryczewska, Henryka Danuta
Powiązania:
https://bibliotekanauki.pl/articles/1841316.pdf
Data publikacji:
2020
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
electromagnetic compatibility
electromobility
electric vehicle
EV charging
kompatybilność elektromagnetyczna
elektromobilność
samochód elektryczny
ładowanie samochodów elektrycznych
Opis:
he article presents the latest information about electromagnetic compatibility testing of electric vehicles, on-board chargers and electric vehicle charging stations with a consideration of current standards and Regulation No. 10 of the United Nations Economic Commission for Europe (UNECE).The aspects of immunity, conducted and radiated emissions were taken into account.
W artykule przedstawiono najnowsze informacje na temat badań samochodów elektrycznych oraz ładowarek pokładowych i zewnętrznych stacji ładowania pod kątem kompatybilności elektromagnetycznej z uwzględnieniem obowiązujących norm oraz Regulaminu nr 10 Komisji Gospodarczej Organizacji Narodów Zjednoczonych (EKG ONZ). Pod uwagęwzięto aspekty odporności i emisji zaburzeń przewodzonych oraz promieniowanych.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2020, 10, 3; 70-73
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prospects for the development of electric vehicle charging infrastructure in Poland in the light of the regulations in force
Autorzy:
Sendek-Matysiak, Ewelina
Pyza, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/1833618.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric vehicle
electromobility
infrastructure
EV charging station
pojazd elektryczny
elektromobilność
infrastruktura
stacja ładowania pojazdów elektrycznych
Opis:
The Polish electric mobility market, presently at a relatively early development stage, cannot compete with traditional means of transport in relation to the number of locations enabling drivers to “refuel” their vehicles. Simultaneously, ex-tension of the network of publicly available EV charging stations constitutes a vital prerequisite for electric vehicle industry development. The feeling of range anxiety connected with limited access to suitable EV charging outlets, in particular during longer trips, discourages potential buyers from purchasing electric vehicles, and, as a result, limited demand hinders development of this industry. In January 2018, the Polish Parliament (the Sejm) passed the Act on electromobility and alternative fuels which establishes a certain system and provides a number of objectives vital for electric vehicle market development. Being aware of the fact that, at least for the first few years, infrastructure development is a key factor, the legislator, in Art. 60, section 1 of the Act, establishes a minimum number of EV charging outlets to be installed in Polish communes, by 31 December 2020. However, no detailed guidelines as to their location were given. It only indicates a minimum number of them, which should be established in communes with a given demographic and transport characteristics of the commune i.e. the number of inhabitants and motor vehicles and the number of cars per 1000 inhabitants of the commune. The purpose of this article is to indicate in which, specifically, municipalities, according to the act, electric vehicles charging outlets are to be located. Based on the analysis performed it was determined that publicly available EV charging outlets must be installed only in 32 of 2477 communes in Poland and these are municipalities. Identification of such communes made it possible to determine the distances between them, which made it possible to verify whether the network of EV charging infrastructure planned on the basis of the guidelines in the Act will enable efficient route travel in the future without experiencing any range anxiety. In addition, the existing market conditions were presented and discussed, with an indication of whether they are conducive to meeting the minimum set in the Act regarding the number of charging points. The conducted analysis is an introduction to further research on determining the optimal distribution of charging outlet in Poland.
Źródło:
Archives of Transport; 2021, 57, 1; 43-58
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
“Interactive Power Devices for Efficiency in Automotive with Increased Reliability and Safety” – the European Project Concerning the Main Automotive and Transport Application Domains
Autorzy:
Kadlec, J.
Kuchta, R.
Novotny, R.
Hajduga, A.
Sekrecki, M.
Roszczyk, P.
Dybowski, J.
Kalbarczyk, J.
Zieliński, W.
Bańbura, P.
Burliński, R.
Powiązania:
https://bibliotekanauki.pl/articles/263013.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
electric vehicle
NAND flash memory
reliability
EV powertrain
electric drive efficiency
pojazd elektryczny
pamięć flash NAND
niezawodność
napęd
napęd elektryczny
efektywność
Opis:
The overall objective of the IDEAS project is to develop advanced packaging for power supply components and new generation memory systems applicable to Electric and ICE propelled vehicles, with paying attention to considering also the aspects that have not been addressed yet in the running ENIAC and ARTEMIS Automotive projects. A major challenge related to electronic devices in the automotive applications is the reliability of power supply systems which must be capable to assure the functionality of subsystems in all operating conditions, inclusive of ageing. The control systems, which rely on multicore microcontrollers and complex software architectures, require increasingly stringent constraints from the memory devices which need to be designed for very high bandwidth, speed and reliability. In the following thesis, a few aspects of the IDEAS project will be presented: a review of important factors that affect the reliability and life-cycle endurance of NAND flash memories, multispeed gear application in electric drives and its influence on the energy efficiency. The problem of electromagnetic compatibility of electronic devices will also be dealt with in the paper
Źródło:
Archiwum Motoryzacji; 2015, 69, 3; 31-64
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved Matlab/Simulink model of dual three-phase fractional slot and concentrated winding PM motor for EV applied brushless DC drive
Autorzy:
Shchur, Ihor
Mazur, Damian
Makarchuk, Oleksandr
Bilyakovskyy, Ihor
Turkovskyi, Valentyn
Kwiatkowski, Bogdan
Kalandyk, Dawid
Powiązania:
https://bibliotekanauki.pl/articles/2175119.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric vehicle
EV
dual three-phase motor
DTP motor
BLDC drive
fractional slot concentrated winding PM motor
FEM modeling
self and mutual differential inductances
Matlab/Simulink model
Opis:
The development of electric vehicles (EV) necessitates the search for new solutions for configuring powertrain systems to increase reliability and efficiency. The modularity of power supplies, converters, and electrical machines is one such solution. Among modular electric machines, dual three-phase (DTP) motors are the most common in high-power drives. To simplify low and medium power drives for EVs based on DTP PM motor, it is proposed to use a BLDC drive and machine of the simplest design - with concentrated windings and surface mounted PMs on the rotor. To study and create such drives, an improved mathematical model of DTP PM machine was developed in this work. It is based on the results of 2D FEM modeling of the magnetic field. According to the developed method, the dependences of the self and mutual inductances between all phase windings from the angle of rotor position and loads of different motor modulus were determined. Based on these inductances, the circuit computer model of DTP PM machine was created in the Matlab/Simulink. It has a high simulation speed and a high level of adequacy, which is confirmed by experimental studies with a mock-up sample of the electric drive system.
Źródło:
Archives of Control Sciences; 2022, 32, 4; 677--707
1230-2384
Pojawia się w:
Archives of Control Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies