Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "dynamic loads" wg kryterium: Temat


Tytuł:
Усовершенствование приводов перчаточных автоматов
Autorzy:
Chaban, A. V.
Powiązania:
https://bibliotekanauki.pl/articles/2131170.pdf
Data publikacji:
2016
Wydawca:
Instytut Studiów Międzynarodowych i Edukacji Humanum
Tematy:
glove automatic
dynamic loads
the device reduce the dynamic loads
Opis:
Goal. An analysis of drives glove machines to develop their new designs that can reduce dynamic loads. Methods. The use of modern methods of analysis based on the theory of the dynamics of mechanical systems. Results. An analysis of drives glove machines. New constructions of drives that can reduce the dynamic loads that occur during their operation. It is noted that the reduction of dynamic loads can be achieved by setting the actuator devices glove machines reduce dynamic loads. Here are the most effective de- vice with elastic elements and electromagnetic clutches. Scientific novelty. A method for improving drive glove machines with devices reduce dynamic loads. Practical significance. New designs drive glove machines.
Źródło:
Humanum. Międzynarodowe Studia Społeczno-Humanistyczne; 2016, 3(22); 17-23
1898-8431
Pojawia się w:
Humanum. Międzynarodowe Studia Społeczno-Humanistyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modal Analysis of a Steel Radial Gate Exposed to Different Water Levels
Autorzy:
Brusewicz, K.
Sterpejkowicz-Wersocki, W.
Jankowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/241116.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
modal analysis
radial gate
dynamic loads
Opis:
With the increase in water retention needs and planned river regulation, it might be important to investigate the dynamic resistance of vulnerable elements of hydroelectric power plants, including steelwater locks. The most frequent dynamic loads affecting hydroengineering structures in Poland include vibrations caused by heavy road and railway traffic, piling works and mining tremors. More destructive dynamic loads, including earthquakes, may also occur in our country, although their incidence is relatively low. However, given the unpredictable nature of such events, as well as serious consequences they might cause, the study of the seismic resistance of the steel water gate, as one of the most vulnerable elements of a hydroelectric power plant, seems to be important. In this study, a steel radial gate has been analyzed. As far as water gates are concerned, it is among the most popular solutions because of its relatively small weight, compared to plain gates. A modal analysis of the steel radial gate was conducted with the use of the FEM in the ABAQUS software. All structural members were modelled using shell elements with detailed geometry representing a real structure.Water was modelled as an added mass affecting the structure. Different water levels were used to determine the most vulnerable state of the working steel water gate. The results of the modal analysis allowed us to compare the frequencies and their eigenmodes in response to different loads, which is one of the first steps in researching the dynamic properties of steel water gates and their behaviour during extreme dynamic loads, including earthquakes.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2017, 64, 1; 37-47
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic load analysis of the connecting bolts in a universal joint
Autorzy:
An, Yuchen
Liu, Jing
Li, Zengguang
Powiązania:
https://bibliotekanauki.pl/articles/2087028.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
dynamic loads
connecting bolts
universal joint
dynamic model
Opis:
Dynamic loads of the connecting bolts in a universal joint can greatly affect the bolt fatigue and fracture, as well as the machinery safety and stability. But few researches focused on those. To obtain the dynamic load characteristics of the connecting bolts in a universal joint, this paper established a flexible dynamic model for the connecting bolts. A multibody dynamic model of a universal joint is developed. The dynamic loads on the connecting bolts of the universal joint are analyzed. The influences of the preloads, speeds and loads are studied. The amplitude and frequency properities are obtained. The effect of the preload is small when the preload is in the range of 80%~120% of the standard value. The load and speed have great influence on the time- and frequency-domain dynamic loads of the bolts. The flexible dynamic model of the connecting bolt is closer to the actual situation than the rigid model since it can consider the preload and deformation of the bolts. This study can provide guidance for the fatigue life prediction of the universal shaft and its bolts.
Źródło:
Eksploatacja i Niezawodność; 2022, 24, 2; 211--225
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of conditions for testing mileage of military vehicles
Autorzy:
Luty, W.
Mieten, M.
Powiązania:
https://bibliotekanauki.pl/articles/30147053.pdf
Data publikacji:
2018
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
mileage tests
special purpose vehicles
dynamic loads
Opis:
The study discusses the issue of determining the conditions for testing the mileage of a vehicle. Lifetime tests are the crucial element of qualification tests. This type of research verifies the resistance of vehicles and elements of their on-board equipment to vibrations and shocks resulting from the interaction of uneven surface during the movement. Certain test conditions can be straightforwardly determined and verified e.g. weather conditions or a type of the road/surface. The problem appears when the tests are to be conducted in field conditions (off-road). At the set driving speed, the level and frequency structure of dynamic loads of elements of a vehicle drive system depend mainly on a surface profile and its viscoelastic conditions. Either the profile or the characteristics of ground foundations change over the time depending on various factors. The paper attempts to assess the interaction of a ground surface of selected field roads on a vehicle. The result of direct measurement of the vertical acceleration captured on a drive axle and on a vehicle’s frame above the axle was addressed. The measurement results were analyzed within the context of possible planning of vehicle test requirements with the application of the method of testing mileage under the field conditions.
Źródło:
Scientific Journal of the Military University of Land Forces; 2018, 50, 3(189); 181-191
2544-7122
2545-0719
Pojawia się w:
Scientific Journal of the Military University of Land Forces
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamics of non-uniformity loads of AFC Drives
Dynamika nierównomierności obciążeń napędów w ścianowym przenośniku zgrzebłowym
Autorzy:
Dolipski, M.
Remiorz, E.
Sobota, P.
Powiązania:
https://bibliotekanauki.pl/articles/218931.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
przenośnik ścianowy
model dynamiczny
obciążenia dynamiczne
nierównomierność obciążenia dynamicznego
armoured face conveyor
dynamic model
dynamic loads
non-uniformity of dynamic loads
Opis:
The length of armoured face conveyors currently used in hard coal mines most often ranges between 200 m and 300 m. The machines are equipped with a main and auxiliary drive. Asynchronous motors mounted in conveyor drives feature the capacity of several hundreds of kilowatts. The non-uniform distribution of loads onto individual drives is observed in practice. The numerical value of loads distribution onto the individual armoured face conveyor drives is represented by a drive load distribution factor. It is defined as a ratio between the load of an electric motor installed in a given drive and the total conveyor load. The article presents a physical armoured face conveyor model intended for examining dynamic phenomena influencing the load non-uniformity of drives. Motion in this physical model is described with the system of (4 · j + 5) non-linear ordinary differential quotations of the second order. A mathematical model is obtained by adding functions describing the interwork of sprocket drums with chains and functions approximating the mechanical characteristics of asynchronous motors powered by means of frequency inverters. A large number of computer simulations was performed using this model enabling to study the impact on the load non-uniformity of drives of such parameters as motor slip, motor supply voltage drop, variations in supply voltage frequency, differences in the gear ratio of transmissions and differentiation in the pitch of scraper chain links along the chain contour.
Długość przenośników zgrzebłowych ścianowych stosowanych obecnie w kopalniach węgla kamiennego najczęściej mieści się w przedziale od 200 m do 300 m. Maszyny te wyposażone są zawsze w napęd główny i pomocniczy, przy czym pierwszy z nich wyniesiony jest do chodnika podścianowego. Silniki napędowe o mocy kilkuset kilowatów napędzają bęben łańcuchowy przez sprzęgło i przekładnię zębatą. Z kolei bębny łańcuchowe poruszają łańcuch zgrzebłowy, który tworzą dwa środkowe łańcuchy ogniwowe ze zgrzebłami przymocowanymi do ogniw poziomych łańcuchów. Ze względu na znaczne wydłużenia sprężyste łańcucha zgrzebłowego obciążonego urobkiem węglowym, konieczne jest jego wstępne napinanie. W zależności od wartości napięcia wstępnego łańcucha zgrzebłowego, oporów ruchu w gałęzi górnej i dolnej przenośnika oraz występujących drgań wzdłużnych, łańcuch może się znajdować w jednym z trzech stanów dynamicznych: w stanie stałego luzowania, w stanie okresowego luzowania lub w stanie nieluzowania. W przenośnikach ścianowych obserwuje się nierównomierny rozdział obciążeń na poszczególne napędy. Jego liczbową miarą jest współczynnik rozdziału obciążenia napędu. Jest on definiowany, jako stosunek obciążenia silnika elektrycznego zainstalowanego w danym napędzie do całkowitego obciążenia przenośnika (wzory 1 i 2). W praktyce niemożliwa staje się eliminacja wszystkich przyczyn nierównomiernego obciążenia napędu głównego i pomocniczego w przenośniku ścianowym. Wobec tego podejmuje się działania mające na celu wyrównywanie obciążeń napędów poprzez sterowanie wybranymi parametrami techniczno-ruchowymi przenośnika ścianowego. Badania komputerowe za pomocą własnego modelu dynamicznego wykazały, że jest to możliwe. Tymi parametrami są częstotliwości napięcia zasilania silników asynchronicznych, które powodują zmiany prędkości kątowych bębnów łańcuchowych. W artykule przedstawiono model fizyczny ścianowego przenośnika zgrzebłowego przeznaczony do badania zjawisk dynamicznych wpływających na nierównomierność obciążenia napędów (rys. 1). Opis ruchu w tym modelu fizycznym tworzy układ (4 · j + 5) nieliniowych równań różniczkowych zwyczajnych drugiego rzędu. Dokładając do tego funkcje opisujące współdziałanie bębnów łańcuchowych z łańcuchami oraz funkcje aproksymujące charakterystyki mechaniczne silników asynchronicznych zasilanych za pomocą przemienników częstotliwości (wzory od 3 do 9) otrzymuje się model matematyczny. Za pomocą tego modelu matematycznego wykonano dużą liczbę symulacji komputerowych umożliwiających badanie wpływu takich parametrów jak poślizg silnika, spadek napięcia zasilania silnika, zmiana częstotliwości napięcia zasilającego, różnica w przełożeniu reduktorów i zróżnicowanie podziałek ogniw łańcucha zgrzebłowego wzdłuż konturu łańcuchowego na nierównomierność obciążenia napędów. Na rysunkach od 4 do 10 pokazano wybrane charakterystyki czasowe przedstawiające wpływ wyżej wymienionych parametrów na nierównomierność obciążenia napędów w przenośniku ścianowym.
Źródło:
Archives of Mining Sciences; 2014, 59, 1; 155-168
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Construction technology of timber-frame houses resistant to dynamic loads – study on models of exterior walls
Autorzy:
Szczepanski, M.
Migda, W.
Jankowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/102257.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
timber frame house
exterior wall
numerical model
dynamic loads
Opis:
The aim of this paper is to show the numeric representation of experimental studies concerning the behaviour of exterior wall models of a timber-frame house under harmonic loading. A single wall model according to traditional technology of timber-frame house walls (filling with mineral wool) was tested. The analysis was conducted for the following frequencies: 0.5 Hz, 1.0 Hz, 2.0 Hz and 5.0 Hz for various values of the specified displacement. A number of hysteresis loops were obtained for each of the tests. Based on them, the damping ratio as well as stiffness were calculated. The skeleton model filled with mineral wool (traditional technology) experienced serious damage under larger displacements. The results of the study have been used to propose a numerical model of wall filled with mineral wool. The proposed numerical model is consistent with the results for the values obtained during the experimental study, which proves the correctness of the adopted solution.
Źródło:
Advances in Science and Technology. Research Journal; 2015, 9, 28; 75-80
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of the cannon on the combat vehicle chassis during firing
Autorzy:
Borkowski, W.
Figurski, J.
Walentynowicz, J.
Hryciów, Z.
Powiązania:
https://bibliotekanauki.pl/articles/241723.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combat vehicle
cannon
dynamic loads
mathematical model
numerical simulations
Opis:
In this paper the mathematical model of combat vehicle as well as mathematical models of input function generated by the cannon during firing and terrain unevenness was presented. This model enables the analysis of dynamic loads of the equipment mounted inside combat vehicle as well as analysis of dynamic loads of the crew. Parameters of the impulse forces acting on the vehicle during firing were determined on the theoretical basics of internal ballistic of cannon. The results of calculation were presented for hypothetical basic combat vehicle with a 125 mm and 73 mm calibre smoothbore gun. Firing during short stops and during combat vehicle motion at different speeds on terrain unevenness as well as angle of elevation of the gun barrel and rotation angle of the turret on the level of dynamic load were considered. A part of this paper was presented at the RTO AVT Symposium on "Functional and Mechanical Integration of Weapons and Land and Air Vehicles".
Źródło:
Journal of KONES; 2007, 14, 1; 49-61
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic load in operation of high-speed tracked vehicles
Autorzy:
Borkowski, W.
Rybak, P.
Powiązania:
https://bibliotekanauki.pl/articles/245770.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
combat vehicles
dynamic loads
terrain driving
HTV vibration
Opis:
The paper describes dynamic load-generating sources and their effects on high-speed tracked vehicles, placed people and equipment within it. The variety of the operation conditions causes a complex dynamic load, both in terms of level, direction and distribution. The effects of the impacts are shown in photographs. It is important to know the level of loads in terms of the development of resistant and safe high-speed tracked vehicles. The selected results of its own researches of high-speed tracked vehicles were presented. research were carried out under conditions similar to those typical for this class of vehicles, both during the rides on the road, the ground and obstacles on the specially constructed for this purpose. The results of research and analysis compare in the form of graphs and the estimated value. The presented scope and methodology allows the multi-variants investigation and estimate the loads of the hall, interior fittings and people in special vehicles and other objects that may be exposed to this type of loads. The presented results of the study confirm the possibility but also the need to load test and analysis of dynamic loads on the vehicle, its crew and equipment within it. Knowing the value of these loads allows for the rational formation of the vehicle structure for obtaining the highest possible technical and combat duration.
Źródło:
Journal of KONES; 2009, 16, 4; 17-22
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The research on dynamic loads and traction properties of military vehicles in the aspect of improvement of their structures
Autorzy:
Borkowski, W.
Rybak, P.
Hryciów, Z.
Wysocki, J.
Michałowski, B.
Wiśniewski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247931.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
military vehicle
dynamic loads
traction
model tests
experimental tests
Opis:
Since the beginning of the 90’s, a scientific team in the Motor Vehicle and Transport Institute of the Mechanical Department in the Military University of Technology, has been involved in the model and experimental tests of the existing structures of the military vehicles (tanks, combat infantry vehicles and wheeled armoured carriers) in the aspect of their modernization. A part of works is related to the military vehicles included in the army’s equipment and the other parts are related to newly designed vehicles. In both cases issues related to the behaviour of selected assemblies and the whole vehicle, structure during threats posed by the reality of contemporary battlefield or armed symmetric or asymmetric conflicts are analysed. Selected effects of the tests and analyses will be presented mostly within the qualitative scope due to the data sensitivity. Contemporary design of military vehicles requires involvement of various research methods and specialized calculation software. The results obtained during performed various experimental tests make a valuable basis for verification of numerical models used in design process and multi-option simulation calculations.
Źródło:
Journal of KONES; 2015, 22, 1; 37-46
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of suspension technical condition on multi-axis vehicle dynamic loads
Autorzy:
Borkowski, W.
Rybak, P.
Hryciów, Z.
Michałowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/247096.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
multi-axial special vehicles
combat vehicles
reliability
dynamic loads
Opis:
The paper describes the operating conditions of multi-axial special vehicles presents the tasks and risks during the so-called peacekeeping and stabilization mission. Given are described risks of travel on the roads and unpaved roads, in towns and hilly terrain. To be able to carry out driving in difficult conditions, the main components of fighting vehicles must have a high reliability. This also applies to the burden of combat. The paper presents a method to assess the condition of the suspension, consequently, its influence on dynamic loads on the crew and the internal equipment of the vehicle, presents a mathematical model of the vehicle similar to the multi-axis wheeled armoured personnel carrier. Describes the numerical model developed on the basis of it. It concerns on performed research for the most common cases. Are examples of the results of numerical estimates of the impact on the failure of the suspension, including damage to the wheels and suspension components, on the level of dynamic loads acting on the vehicle, its equipment and people stay in it. The model vehicle is a versatile tool for analyzing the dynamics of different types of vehicles, including tracked combat vehicles and multiaxial vehicles.
Źródło:
Journal of KONES; 2011, 18, 4; 421-426
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research on the dynamic loads of the wheeled armoured personnel carrier
Autorzy:
Borkowski, W.
Hryciów, Z.
Michałowski, B.
Rybak, P.
Wiśniewski, A.
Wysocki, J.
Powiązania:
https://bibliotekanauki.pl/articles/243711.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
experimental research
dynamic loads
wheeled armoured personnel carrier
acceleration
vibrations
Opis:
The results of the experimental research on the influence of the special vehicle movement conditions on the body shell and the vehicle crew dynamic load will be presented in the paper. ROSOMAK Wheeled Armoured Personnel Carrier (Wheeled APC), the basic version, was the subject of the research. The research work was aimed at analysis of the dynamic loads resulting from the deterministic inputs and driving on the selected types of surfaces generating random kinematic inputs. The personnel carrier service conditions, measuring apparatus, and testing methods will be described. The vertical accelerations of the selected points of the vehicle, and deflection of the prime and second suspension of the vehicle left side were measured. The time and the acceleration RMS value spectrum charts for the selected implementations will be presented. The cumulative statistics will be shown in the form of a table. The conclusions regarding the influence of the road surface on the personnel carrier driver's working comfort will be formulated. The assessment of the suspension quality will be included in the conclusions. Driving on the smooth surface is comfortable. However, the road surface worsening causes decreased proficiency sense until the exposure limit boundary is reached when the vehicle drives on a poor quality cobble road with 50 km/h speed. The vehicle basic version is not fitted with the seats for assault troops, therefore the influence of the road irregularities on the centre of mass of the body shell, and the driver's and commander's seats were determined. It is recommended to make further tests on the personnel carrier combat and special versions.
Źródło:
Journal of KONES; 2011, 18, 1; 69-76
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer modelling of roadheaders body vibration generated by the working process
Autorzy:
Cheluszka, P.
Gawlik, J
Powiązania:
https://bibliotekanauki.pl/articles/128170.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
roadheader
dynamic model
dynamic loads
vibrations
kombajn chodnikowy
model dynamiczny
obciążenia dynamiczne
drgania
Opis:
Boom–type roadheaders represent heavy working machines used in underground mines for the drilling of dog headings, for tunnelling and – to a certain extent – for surface mining. The key working process carried out by such roadheaders is rock mining. This process, especially when cutting rocks with low workability, causes strong vibration excitations and dynamic loads not only in a roadheader cutting system, but within its entire construction. The article presents a dynamic model of a boom–type roadheader body. Four vibrating masses, representing the key subassemblies of the studied object and a seat together with a roadheader operator, are distinguished in a spatial physical model with a discrete structure. They are subject to the activity of an excitation from the loads generated in the cutting process. A mathematical model is comprised of 19 non-linear ordinary differential quotations of the second order. The model was implemented in the MATLAB/Simulink environment, in which a simulation model was created. The article presents the examples of results of numerical simulations using the established model.
Źródło:
Vibrations in Physical Systems; 2016, 27; 67-74
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental complex for material impact strength researches
Autorzy:
Astanin, V. V.
Olefir, G. O.
Balalaey, A. V.
Powiązania:
https://bibliotekanauki.pl/articles/243348.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
impact loads
dynamic loads
residual deformation
composite materials
thermogas ballistic installation
deformation measurement device
Opis:
The objective has been stated to investigate the capability of materials and structures to with stand to impact loading. Computerized research complex has been developed and manufactured to carry out experiments on impact interaction of specimen with an accelerated to a certain velocity piercer. The complex includes ,,GANCHEN"-type thermogas ballistic gun for piercer accelerating, piercer velocimeter, ballistic pendulum for measurement of integral energy datum of piercer-specimen interaction, and ,,ODD" device for measurement of residual deformation of the specimen. The experiment progress control, gaging equipment sensor signal processing and obtained information data storage are accomplished at researches. The elaborated system and research techniques permit carrying out a series of comparative check tests of specimens of different metal-composite constructions. Measurement of damages of a multilayer composite surface, the principal scheme of the thermal gas ballistic laboratory installation, basic and structural schemes of optical detector of deformations ODD-C, dependence of the optical gauge displacement, a screenshot of the developed software for the ,,ODD" device operation, the scheme of the contactless surface deformation damages scanning method, calculation algorithm of the scanned surface coordinates, appearance of the material samples after punching with a spherical piercer and computer representation of measurements of damaged zones, results of research of metal-plastic composites, increase of ability of samples to absorb the energy of the sphere, discrete character of deformation distribution are presented in the paper.
Źródło:
Journal of KONES; 2008, 15, 1; 17-28
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical tests of roadheader’s boom vibrations
Autorzy:
Dolipski, M.
Cheluszka, P.
Sobota, P.
Powiązania:
https://bibliotekanauki.pl/articles/128235.pdf
Data publikacji:
2014
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
roadheader
boom
dynamic model
dynamic loads
vibrations
kombajn chodnikowy
model dynamiczny
obciążenia dynamiczne
drgania
Opis:
The work presents a dynamic model of a telescopic boom of a roadheader. The boom represents a load–carrying structure of cutting heads and of their drive system. Together with the cutting heads’ drive, it represents a cutting system of a roadheader performing the roadheader’s basic function, that is cutting the heading face. A physical model with a discrete structure was created for the purpose of analysing the vibrations accompanying the operation of a roadheader. Due to the design of the telescopic boom, three vibrating masses are distinguished in this model concentrated in the centre of gravity of rigid bodies representing: the fixed part of the boom, the extendable part (telescope) and a reduction gear (with transverse cutting heads mounted in the output shaft journals) fitted to the extendable part of the boom. It is a spatial model with 18 degrees of freedom. The mathematical model established was used in simulation tests the aim of which was to identify the value and sources of vibrations in the selected structural nodes of the boom during the performance of a working process. The excitation of vibrations is an effect of a computer simulation of the rock cutting process with transverse heads with the set stereometry. The article presents selected results of numerical tests using the established dynamic model.
Źródło:
Vibrations in Physical Systems; 2014, 26; 65-72
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of stress-strain state of plates under impact loading
Autorzy:
Astanin, V. V.
Borodachov, M. M.
Bogdan, S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/243346.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
impact loads
dynamic loads
plate
strengthened ribs
plate with damages
numerical methods
stress-strain state
Opis:
The problem concerning the stress-strain state of a plate under impact load with various intensity levels of collision momentum applying finite-element method was considered. The problem concerning transversal impact of a body in form of a mass point or a finite body to the sheet-formed structures of following type: a plate, a plate strengthened by ribs, a plate with damages was considered. Problem design diagram, design diagram of plate, fields of deflection intensities distribution w for plate central surface, stress distribution fields of the plate based layer, stress distribution fields of the plate based layer equivalent stresses sigma eq =f(m), relations for sigma eq = f(m) and w = f(m) at variation of impact initial velocity, impulse form of view, deflection and equivalent stress sigma eq intensity distribution diagrams in cross-section Kn depending on view form of impulse, the diagram of plate's deflections, the stress field sigma eq of the plate caused by impact body of finite dimensions, the field of deflection intensity distributions w for damage plate, the field of equivalent stress intensity distributions sigma eq for damage plate, the structure diagram of plate with stringers, the deflection field of plate with stringers, diagrams of equivalent stresses sigma eq of plate with stringers in central cross-section along axis x at damage deeps are presented in the paper.
Źródło:
Journal of KONES; 2008, 15, 1; 5-15
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies