- Tytuł:
- Cmbustion of mixture of diesel fuel with gasoline in a compression ignition engine
- Autorzy:
-
Tutak, W.
Jamrozik, A. - Powiązania:
- https://bibliotekanauki.pl/articles/242181.pdf
- Data publikacji:
- 2018
- Wydawca:
- Instytut Techniczny Wojsk Lotniczych
- Tematy:
-
combustion
engine
diesel
gasoline
combustion phases - Opis:
- Paper presents results of experimental investigation of combustion process of diesel-gasoline blend in compression ignition direct injection engine. The researches were conducted for constant load of engine at constant rotational speed. Operating parameters of engine powered with diesel-gasoline blend were at the same level as for engine powered by pure diesel fuel. The preliminary study was conducted using CFD modelling. Based on encouraging modelling results preliminary experimental research was carried out. It turned out that it is possible to co-burning diesel with the gasoline as a blend. A mixture of 20, 40 and 60% of gasoline with diesel was used. It was concluded that an increase in gasoline fraction in blend causes delay of start of the combustion process. The homogeneity of the fuel-air mixture was improved due to longer ignition delay, which is accompanied by higher values of pressure rise rate. With 20 and 40% of gasoline fraction causes higher peak pressure compared to reference fuel-burning ware obtained. Up to 40% of gasoline fraction, the BSFC was kept at the same level as for reference fuel. It was observed that with the increase in gasoline fraction up to 40% NOx emission increased as well. Based on the carried out tests it can be stated that it is possible to co-burn gasoline with diesel in a compression ignition engine while maintaining the invariable engine operating parameters and exhaust emissions.
- Źródło:
-
Journal of KONES; 2018, 25, 2; 391-398
1231-4005
2354-0133 - Pojawia się w:
- Journal of KONES
- Dostawca treści:
- Biblioteka Nauki
Artykuł