Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "convection" wg kryterium: Temat


Tytuł:
Numerical Analysis of Convective Heat Transfer for Selected Geometric System
Autorzy:
Orłowska, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/2174927.pdf
Data publikacji:
2022
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
convection
intensification
protect
environment
Opis:
The contemporary problems and issues of environmental protection refer to a large extent to problems related – generally speaking – to energy. Currently, the production processes mainly concern the combustion of energy fuels, transport – over long distances, and their use for utility purposes, e.g. engine drive or heating. These processes significantly negatively impact the environment and are magnified by their enormous intensity and size. While energy production and transport processes have been studied for many years, and their results are widely published, the issues related to the application and operation of heating devices are little known and require much observation and research. The operating indicators of heating devices are generally characterized by low values (natural convection), and their artificial increase (intensity) cannot be used due to the acoustic effects and additional (significant) investment costs. The article presents some research results on the intensification of heat flow – i.e. the thermal efficiency of flat heaters placed in a room with a specific temperature. Physical phenomena were investigated numerically by shaping the heat exchange space. The tested systems concerned a room with a free-standing heater, a heater with a vertical panel mounted in parallel, and a system with a curved bottom plate forming the so-called de Laval nozzle. Interesting results of air velocity and temperature fields and values of the heat transfer coefficient along the height of the heater were obtained. Based on the presented research, it can be concluded that the creation of convection surfaces around the heater is advisable because it affects the intensity of heat exchange, which can be increased without energy-intensive energy expenditure, i.e. in a non-mechanical way. Undoubtedly contributes positively to investment and operating costs, which is essential in environmental protection issues.
Źródło:
Rocznik Ochrona Środowiska; 2022, 24; 163--171
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Global stability for thermal convection in a couple-stress fluid with temperature and pressure dependent viscosity
Autorzy:
Choudhary, S. S.
Bharti, P. K.
Powiązania:
https://bibliotekanauki.pl/articles/178230.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
konwekcja
konwekcja cieplna
stabilność
płyn nieniutonowski
convection
thermal convection
stability
non-Newtonian fluid
Opis:
We show that the global nonlinear stability threshold for convection in a couple-stress fluid with temperature and pressure dependent viscosity is exactly the same as the linear instability boundary. This optimal result is important because it shows that linearized instability theory has captured completely the physics of the onset of convection. It has also been found that the couplestress fluid is more stable than the ordinary viscous fluid and then the effect of couple-stress parameter (F) and variable dependent viscosity (Γ) on the onset of convection is also analyzed.
Źródło:
Studia Geotechnica et Mechanica; 2013, 35, 3; 85-102
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of thermal stratified storage tank
Autorzy:
Smusz, R.
Kielan, P.
Mazur, D.
Powiązania:
https://bibliotekanauki.pl/articles/140948.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
temperature stratification
thermal energy
heat recovery
convection
Opis:
The basic aim of the task is to compile a temperature stratification system in an accumulation tank. The range of the thesis concerns the shape and dimensions of a stratification system for an accumulation tank. Thermal stratification is a process that comprises the maintaining of temperature stratification at different levels of an accumulation tank which reduce to a minimum the process of temperature equalization. It results from the fact that the thermal stratification in a tank significantly increases the installation efficiency and improves the process of energy storing. It is connected with a thermodynamic element quality, that is the higher the temperature, the higher the energy, and, thus, the thermosdynamic element quality. In this phenomenon, thanks to the same amount of accumulated thermal energy and average temperature, as in a fully mixed tank, the user has a higher temperature in the upper part of the tank at his disposal. It has significant importance in the case when there is a low-temperature heating medium that transfers heat to the accumulation tank. Such a situation occurs when heat is absorbed from synthetic freons used in cooling and air-conditioning systems.
Źródło:
Archives of Electrical Engineering; 2017, 66, 3; 631-642
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ metody doprowadzenia ciepła w procesie suszenia marchwi na kinetykę procesu
Influence of the method of heat input in carrot drying on the kinetics of the process
Autorzy:
Skorupska, E.
Powiązania:
https://bibliotekanauki.pl/articles/290826.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
suszenie
konwekcja
mikrofale
marchew
drying
convection
microwaves
carrot
Opis:
Badano wpływ sposobu doprowadzania ciepła (strumieniem gorącego powietrza o temperaturze 70, 100 i 150°C przez 4 min lub promieniowania mikrofalowego ok. 250 W przez 0,5 i 1 minutę) do pojedynczych plastrów marchwi przed procesem suszenia w warunkach konwekcji naturalnej na kinetykę procesu. Określono zależność szybkości suszenia w temperaturze 70 i 106°C w funkcji zawartości wody po zastosowaniu różnych metod wstępnego ogrzewania oraz określono statystycznie charakter tych zmian w przedziałach zawartości wody.
Influence of the method of heat input (stream of hot air at temperature 70, 100 and 150°C for 4 minutes or microwave radiation circa 250 W for 0.5 and 1 minute) to single carrot slices before the drying process in natural convection conditions on the process kinetics was analysed. The relation between drying speed at temperature 70 and 106°C as function of water content after application of various methods of preliminary heating was determined and character of these changes in water content ranges was determined.
Źródło:
Inżynieria Rolnicza; 2006, R. 10, nr 7(82), 7(82); 391-398
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat transfer processes in installations with photovoltaic roof tiles
Autorzy:
Kurz, D.
Powiązania:
https://bibliotekanauki.pl/articles/97640.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
photovoltaic roof tile
convection
radiation
conduction
heat transfer
Opis:
The paper presents the classification of methods of heat transfer, and the procedure when determining criterion equations depending on the type of heat exchange. It describes the heat transfer coefficients and resistance of heat transfer by convection. It also indicates the workflow to determine the quantitative heat flow in the present system of photovoltaic roof tiles installed in the roof structure.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 444-456
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Research of Temperature Distribution on the Surface of the Front Plate, of a Flat Plate Heat Exchanger
Badania eksperymentalne rozkładu temperatury na powierzchni płyty czołowej płaskiego, płytowego wymiennika ciepła
Autorzy:
Orłowska, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/1811588.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
radiator
temperature
convection
isothermal
grzejnik
temperatura
konwekcja
izotermiczność
Opis:
The purpose of the work was to perform experimental tests on a plate heat exchanger. For this purpose, a laboratory test stand located in the hall of the Koszalin University of Technology was used. The experiment concerned checking the isothermal face of a flat panel radiator. Temperature distributions were checked at three board heights and in twelve finite elements. Temperature distribution fields were obtained depending on the flow rates tested.
Celem pracy było wykonanie badań eksperymentalnych na płytowym wymienniku ciepła. W tym celu wykorzystano laboratoryjne stanowisko badawcze zlokalizowane w sali Politechniki Koszalińskiej. Eksperyment dotyczył sprawdzenia izotermicznej powierzchni płaskiego grzejnika płytowego. Rozkłady temperatury sprawdzono na trzech wysokościach płyty i w dwunastu elementach skończonych. W zależności od badanych natężeń przepływu uzyskano pola rozkładu temperatury.
Źródło:
Rocznik Ochrona Środowiska; 2020, Tom 22, cz. 1; 256-264
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the onset of thermal instability of a porous medium layer saturating a Jeffrey nanofluid
Autorzy:
Rana, Gian C.
Gautam, Poonam Kumari
Powiązania:
https://bibliotekanauki.pl/articles/38883772.pdf
Data publikacji:
2022
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
nanofluid
Jeffrey model
Rayleigh number
porous medium
convection
Opis:
The onset of stationary convection in thermal instability of porous layer saturating a Jeffrey nanofluid is studied. The behaviour of nanofluid is described by a Jeffrey fluid model and the porous layer is assumed to follow Darcy’s law. Due to the presence of the Jeffrey parameter and nanoparticles, the momentum-balance equation of fluid is modified. The linear stability analysis and normal modes analysis method are utilised to derive the dispersion relation for the Rayleigh number in terms of various parameters for free-free boundaries. The effects of the Jeffrey parameter, Lewis number, modified diffusivity ratio, nanoparticles’ Rayleigh number and medium porosity on the physical system are discussed analytically and graphically.
Źródło:
Engineering Transactions; 2022, 70, 2; 123-139
0867-888X
Pojawia się w:
Engineering Transactions
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Boundary layer analysis in nanofluid flow past a permeable moving wedge in presence of magnetic field by using Falkner – skan model
Autorzy:
Ali, M.
Alim, M. A.
Powiązania:
https://bibliotekanauki.pl/articles/265769.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
magnetohydrodynamika
nanofluid
porowatość
konwekcja
MHD
wedge flow
porosity
convection
Opis:
In the present work, the effect of various dimensionless parameters on the momentum, thermal and concentration boundary layer are analyzed. In this respect we have considered the MHD boundary layer flow of heat and transfer over a porous wedge surface in a nanofluid. The governing partial differential equations are converted into ordinary differential equations by using the similarity transformation. These ordinary differential equations are numerically solved using fourth order Runge–Kutta method along with shooting technique. The present results have been shown in a graphical and also in tabular form. The results indicate that the momentum boundary layer thickness reduces with increasing values of the pressure gradient parameter β for different situations and also for the magnetic parameter M but increases for the velocity ratio parameter λ and permeability parameter K*. The heat transfer rate increases for the pressure gradient parameter β, velocity ratio parameter λ, Brownian motion parameter Nb and Prandtl number Pr but opposite result is found for the increasing values of the thermoporesis parameter Nt. The nanoparticle concentration rate increases with an increase in the pressure gradient parameter β, velocity ratio parameter λ, Brownian motion parameter Nb and Lewis number Le, but decreases for the thermoporesis parameter Nt. Finally, the numerical results has compared with previously published studies and found to be in good agreement. So the validity of our results is ensured.
Źródło:
International Journal of Applied Mechanics and Engineering; 2018, 23, 4; 1005-1013
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pomiary parametrów cieplnych przekładni zębatych
Measurements of heat parameters in cylindrical gears
Autorzy:
Tomaszewski, J.
Rysiński, J.
Powiązania:
https://bibliotekanauki.pl/articles/157994.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
temperatura
ciepło
tarcie
konwekcja
heat balance
temperature
friction
convection
Opis:
Temperatura jako jeden z podstawowych parametrów diagnostycznych ma bardzo duży wpływ na charakter pracy przekładni. Dlatego w pracy przedstawiono doświadczalne metody pomiaru parametrów cieplnych przekład-ni. Badania przeprowadzono na stanowisku mocy zamkniętej.
Temperature is one of the basic parameters used for an assessment of gear work conditions. In a real object, the registration of temperature in some characteristic points is needed. Therefore, in the paper the experimental investigation of heat parameters in characteristic points are presented. The experimental investigations were performed on the power-closed-loop test stand (called also back-to-back rig or circulating power test stand).
Źródło:
Pomiary Automatyka Kontrola; 2007, R. 53, nr 12, 12; 35-37
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie gęstości strumienia ciepła konwekcji wymuszonej w przepływie laminarnym w przewodach prostoosiowych metodą elementów brzegowych
Determination of heat flux density of forced convection flows through straight pipes by the Boundary Element Method
Autorzy:
Teleszewski, T. J.
Powiązania:
https://bibliotekanauki.pl/articles/404095.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Symulacji Komputerowej
Tematy:
metoda elementów brzegowych
laminarny przepływ jednokierunkowy
strumień ciepła
konwekcja
konwekcja wymuszona
boundary element method
laminar unidirectional flow
heat flux
convection
forced convection
Opis:
W pracy przedstawiono algorytm MEB do analizy pól temperatury i gęstości strumienia ciepła przy przepływie laminamym z wymianą ciepła w przewodach prostoosiowych o dowolnym kształcie przekroju poprzecznego. Zaprezentowano sformułowanie zagadnienia przy użyciu metody elementów brzegowych do opisu przepływu i wymiany ciepła w przepływie jednokierunkowym przez przewód o dowolnym kształcie przekroju poprzecznego. Przedstawiono graficzne rezultaty obliczeń przepływu z udziałem konwekcji wymuszonej w profilowanym przewodzie prostoosiowym.
The paper presents the numerical application Boundary Element Method to analyze the temperature and heat flux density distribution of forced convection laminar flows through straight pipes with arbitrary cross-section shapes. Integral formulations the problems of the fluid flow and heat exchange for the case of the laminar unidirectional flow with heat transfer was presented. Moreover graphical results of the numerical calculations the velocity, temperature and heat flux of laminar flow in the profiled straight pipe were presented.
Źródło:
Symulacja w Badaniach i Rozwoju; 2014, 5, 2; 143-153
2081-6154
Pojawia się w:
Symulacja w Badaniach i Rozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ metody suszenia na wytrzymałość mechaniczną suszu z selera korzeniowego
Effect of drying mode on mechanical resistance of dried celeriac
Autorzy:
Nowak, D.
Krzywoszyński, P.
Powiązania:
https://bibliotekanauki.pl/articles/2070115.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
konwekcja
podczerwień
test łamania
chrupkość
convection
infrared
breaking test
crispness
Opis:
Seler (8 odmian), w postaci plastrów, suszono konwekcyjnie i za pomocą bliskiej podczerwieni. Susz poddawano testowi łamania przy użyciu teksturoinetru Ti'xture Analyser. Wyznaczono prace zniszczenia próbki, chrupkość i maksymalną siłę zniszczenia próbki. Nie stwierdzono jednoznacznego zróżnicowania pomiędzy właściwościami mechanicznymi suszu w zależności od odmiany ani metody suszenia j materiału nieblanszowanego. Blanszowanie spowodowało istotną zmianę wytrzymałości badanych suszów.
Celeriac slices (8 varieties of raw material) were dried by convection and infrared methods. Dried material was subjected to a breaking test using the Texture Analyzer Apparatus. On basis of the deformation curve breaking force, crispness and work of breakage were determined. Disparities of mechanical properties due to variety of material and drying mode of non-blanching material were not observed. Blanching caused significant changes of examined dried material resistance.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 1; 40-41
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of regulating elements on convective heat transfer along shaped heat exchange surfaces
Autorzy:
Cernecky, J.
Koniar, J.
Brodnianska, Z.
Powiązania:
https://bibliotekanauki.pl/articles/185818.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer
convection
holographic interferometry
przenikanie ciepła
konwekcja
interferometria holograficzna
Opis:
The paper deals with a study of the effect of regulating elements on local values of heat transfer coefficients along shaped heat exchange surfaces with forced air convection. The use of combined methods of heat transfer intensification, i.e. a combination of regulating elements with appropriately shaped heat exchange areas seems to be highly effective. The study focused on the analysis of local values of heat transfer coefficients in indicated cuts, in distances expressed as a ratio x/s for 0; 0.33; 0.66 and 1. As can be seen from our findings, in given conditions the regulating elements can increase the values of local heat transfer coefficients along shaped heat exchange surfaces. An optical method of holographic interferometry was used for the experimental research into temperature fields in the vicinity of heat exchange surfaces. The obtained values correspond very well with those of local heat transfer coefficients [alfa]x, recorded in a CFD simulation.
Źródło:
Chemical and Process Engineering; 2013, 34, 1; 5-16
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Convection and radiation cooling of overhead power lines - laboratory verification using thermography
Autorzy:
Chatzipanagiotou, P.
Felczak, M.
De Mey, G.
Chatziathanasiou, V.
Więcek, B.
Powiązania:
https://bibliotekanauki.pl/articles/114618.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
overhead power line
convection
laminar and turbulent airflow
radiation
IR thermography
Opis:
The thermal behavior of overhead power lines depends upon physical parameters, such as surface emissivity and line dimensions, as well as weather conditions. In this paper, the results of the convection and radiation cooling of a conductor that simulate a power line are presented. Laboratory experiments were conducted and the results were compared with the data obtained using empirical formulae from the literature. Both the laminar and the turbulent airflow were investigated.
Źródło:
Measurement Automation Monitoring; 2017, 63, 3; 107-110
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface tension reduction in air-water systems containing nonionic surfactant - comparison of mass transfer limited models
Redukcja napięcia powierzchniowego w układzie woda-powietrze zawierającym niejonowy surfaktant - porównanie modeli z limitem transportu masy
Autorzy:
Kramek-Romanowska, K.
Sosnowski, T. R.
Powiązania:
https://bibliotekanauki.pl/articles/2073277.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
adsorption dynamics
surface tension
diffusion
convection
dynamika adsorpcji
napięcie powierzchniowe
dyfuzja
konwekcja
Opis:
In this work, a proposal of non-diffusional description of surface tension reduction in dynamic conditions in systems containing nonionic surfactant Tween80 is presented. The proposed macroscopic model exploits the conception of mass transfer coefficient in liquid phase. In addition, changes in interfacial surface (surface of a growing bubble in the Maximum Bubble Pressure method) are taken into account in the model. Obtained results were compared with the asymptotic solution of Ward and Tordai equation and experimental results.
Przedstawiono propozycję opisu dynamiki obniżania napięcia powierzchniowego układu roztwór niejonowego surfaktantu TweenSOpowietrze. Zaproponowany model wykorzystuje ujęcie makroskopowe procesu z zastosowaniem koncepcji współczynnika wnikania masy w fazie ciekłej. W obliczeniach uwzględniono zmienność pola powierzchni pęcherza na której gromadzi się surfaktant oraz efekty konwekcyjne. Wyniki porównano z asymptotycznym rozwiązaniem Ward-Tordai dyfuzyjnego modelu transportu surfaktantu do powierzchni międzyfazowej oraz wynikami eksperymentalnymi.
Źródło:
Inżynieria i Aparatura Chemiczna; 2017, 3; 78--79
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Marangoni convection in a relatively hotter or cooler liquid layer with free boundaries
Autorzy:
Gupta, A. K.
Shandil, R. G.
Powiązania:
https://bibliotekanauki.pl/articles/265233.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
napięcie powierzchniowe
konwekcja
przewodzenie
stabilność liniowa
surface tension
convection
conducting
linear stability
Opis:
In this paper, we study the onset of cellular convection in a horizontal fluid layer heated from below, with a free-slip boundary condition at the bottom when the driving mechanism is surface tension at the upper free surface, in the light of the modified analysis of Banerjee et al. (Jour. Math. & Phys. Sci., 1983, 17, 603). This leads to a formulation of the problem which depends upon whether the liquid layer is relatively hotter or cooler. It is found that the phenomenon of surface tension driven instability problems should not only depend upon the Marangoni number which is proportional to the maintained temperature differences across the layer but also upon another parameter that arises due to variation in the specific heat at constant volume on account of the variations in temperature. Numerical results are obtained for the problem wherein the lower free boundary is perfectly thermally conducting.
Źródło:
International Journal of Applied Mechanics and Engineering; 2013, 18, 2; 581-588
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies