Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "concrete sludge" wg kryterium: Temat


Wyświetlanie 1-8 z 8
Tytuł:
The effect of adding slag, achieved from wastewater sludge incineration in fluidized-bed furnace, on the quality of concrete
Autorzy:
Pietrzak, Alina
Powiązania:
https://bibliotekanauki.pl/articles/104162.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
concrete
ash
sewage sludge
concrete quality
beton
popiół
osady ściekowe
jakość betonu
Opis:
Due to a constant increase in generating the amount of sewage waste it is necessary to find an alternative method of its use or disposal. One of such methods can be utilization of sewage sludge in construction materials industry, particularly in concrete technology and other materials based on cement. It allows using waste materials as a passive additive (filler) or also as an active additive (replacement of part of bonding material). The article aims at presenting the analysis of the effect of adding slag, achieved from wastewater sludge incineration in sewage treatment plant, on properties and quality of concrete mix and hardened concrete. Using an experimental method, the researcher designed the composition of the control concrete mix, which was then modified by means of slag. For all concrete mixtures determined – air content with the use of pressure method and consistency measured by the use of concrete slump test. For all concrete series the following tests were conducted: compressive strength of concrete after 7, 28 and 56 days of maturing, frost resistance for 100 cycles of freezing and thawing, water absorption. The use of slag, ground once in the disintegrator, causes a decrease of in compressive strength of concrete samples in relation to the control concrete series as well as bigger decrease in compressive strength after frost resistance test.
Źródło:
Quality Production Improvement - QPI; 2019, 1, 1; 244-250
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ popiołów powstałych ze spalania osadów ściekowych na podstawowe właściwości mechaniczne betonu
The effect of ashes generated from the combustion of sewage sludge on the basic mechanical properties of concrete
Autorzy:
Pietrzak, Alina
Powiązania:
https://bibliotekanauki.pl/articles/2065520.pdf
Data publikacji:
2019
Wydawca:
Politechnika Częstochowska
Tematy:
beton
popiół
osady ściekowe
właściwości betonu
concrete
ash
sewage sludge
concrete properties
Opis:
Przedstawiono analizę wpływu dodatku popiołu, powstałego ze spalania osadów ściekowych w oczyszczalniach ścieków, na właściwości stwardniałego betonu. Metodą doświadczalną zaprojektowano skład mieszanki betonowej kontrolnej, którą następnie modyfikowano przy użyciu popiołu lotnego. Dla wszystkich uzyskanych serii betonów wykonano badania: wytrzymałości na ściskanie betonu po 7, 28 i 56 dniach dojrzewania, mrozoodporności dla 100 cykli zamrażania i rozmrażania, nasiąkliwości. Betony modyfikowane popiołem powstałym ze spalania osadów ściekowych charakteryzowały się porównywalną wytrzymałością na ściskanie w stosunku do betonu kontrolnego oraz odnotowały niższy spadek wytrzymałości na ściskanie po badaniu mrozoodporności.
The article presents an analysis of the impact of fly ash addition, which originated from the combustion of sewage sludge in sewage treatment plants, on the properties of hardened concrete. The composition of control concrete mixture was designed using the experimental method, and then it was modified using fly ash. For all concrete series obtained, tests were performed: compressive strength of concrete after 7, 28 and 56 days of maturation, frost resistance for 100 cycles of freezing and thawing, and absorbability. Ash-modified concretes formed from the combustion of sewage sludge were characterized by comparable compressive strength in comparison to the control concrete and recorded a lower drop in compressive strength after the frost resistance test.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2019, 8, 1; 29--35
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
  • odwiedzone
Tytuł:
Biogas Recovery from Refinery Oily Sludge by Co-Digestion Followed by Sustainable Approach for Recycling the Residual Digestate in Concrete Mixes
Autorzy:
Jasim, Hassan S.
Ismail, Zainab Z.
Powiązania:
https://bibliotekanauki.pl/articles/2204865.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
co-digestion
biogas recovery
methane
Gompertz model
oily sludge
refinery oily sludge
concrete
Opis:
This study investigated the potential of biogas recovery from refinery oily sludge (ROS) inoculated with animals’ manure by co-digestion of in lab-scale biodigesters at mesophilic conditions. Cow dung (CD), cattle manure (CM), and poultry manure (PM) were utilized as co-substrates. The biogas production from the co-digestion process exceeds its production from uninoculated ROS by approximately 67.5 %, 22.13% and 21.6% for PM, CM, and CD, respectively. Kinetics of the co-digestion process was well described by the modified Gompertz model. The predicted and experimental values of biogas production were well fitted with R2 > 0.96, suggesting favorable conditions of the digestion process. New approach for recycling the residual digestate to replace freshwater in concrete mixes was carried out. Results of examining the mechanical properties of the residual digestate-modified concrete mixes demonstrated a potential sustainable approach for the disposal of residual digestate in concrete mixes.
Źródło:
Advances in Science and Technology. Research Journal; 2022, 16, 5; 178--191
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fly ash from thermal transformation of sewage sludge as an alternative additive to concrete resistant to environmental influences
Autorzy:
Rutkowska, Gabriela
Żółtowski, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/24202540.pdf
Data publikacji:
2022
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
concrete
fly ash
sewage sludge
strength
frost resistance
heavy metals
Opis:
Concrete is currently the most widely used man-made composite material and second only to water in the entire range of materials used. It is a material with a high potential to adapt to specific operating conditions and can be made from local raw materials (aggregate, cement, water, and mineral additives), which can be selected to minimize the carbon footprint. The use of fly ash from the thermal conversion of sewage sludge in concrete is in accord with the advice on waste management proposed in the European Union. This paper presents the results of research on the effect of the partial replacement of Portland cement with this material on the strength parameters, frost resistance, and carbonation of concrete compared to reference concrete and to concrete containing a conventional additive – siliceous fly ash. In addition, the potential environmental impact of the use of sewage sludge ash was investigated by determining the leachability of heavy metals. Concrete mixtures of C20/25 ordinary concrete, based on CEM I 42.5R Portland cement, with varying ash contents comprising 0–20% of the cement mass, were produced for the experimental work. The obtained test results confirmed the possibility of producing plain concrete modified with fly ash from the thermal treatment of sewage sludge and the concrete’s compliance with the environmental requirements relating to the leaching of heavy metals.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2022, 71 (143); 48--55
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of Fly Ash from Thermal Treatment of Sewage Sludge According to the Applicable Standards
Autorzy:
Rutkowska, Gabriela
Powiązania:
https://bibliotekanauki.pl/articles/24201787.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
fly ash
sewage sludge
physical and chemical properties
concrete
compressive strength
heavy metals
Opis:
The restrictions on carbon dioxide emissions introduced by the European Union encourage experimental work on new generation materials containing smaller amounts of clinker. Currently, silica fly ash from the combustion of hard coal is widely used in cement and concrete technology in Europe and in Poland. Their wide application is mainly determined by their chemical and phase composition, especially pozzolanic activity, their high fineness, similar to cement. The aim of the research was to assess the properties of fly ash from thermal treatment of sewage sludge in terms of use in concrete technology in relation to EN 450-1, ASTM-C618-03 and ASTM C379-65T. The obtained test results confirm that the tested material has a different physicochemical composition and does not meet the requirements related to the use of ash in the production of concrete. In addition, the research showed the possibility of producing ordinary concrete, modified with fly ash from thermal treatment of sewage sludge. The average compressive strength for concrete containing 15% of ash from Cracow was set at 48.1 MPa and 49.2 MPa after 28 and 56 days of maturation, for ash from Warsaw at 42.0 MPa and 45.1 MPa, and for ash from Łódź at 36.2 MPa and 36.2 MPa. The determined concentrations of heavy metals are below the maximum values to be met when discharging waste water into the ground or water, the leaching limits required for accepting inert waste for disposal and for substances particularly harmful to the aquatic environment. On this basis, it was found that the migration of heavy metals from concretes with ash addition to the aquatic environment is insignificant and should not be a significant problem.
Źródło:
Journal of Ecological Engineering; 2023, 24, 3; 20--34
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental aspect of using ash from thermal treatment of municipal sewage sludge in hardening slurries
Autorzy:
Szarek, Łukasz
Krysiak, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/2032877.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ash
concrete
municipal sewage sludge
heavy metals
popiół
beton
komunalny osad ściekowy
metale ciężkie
Opis:
Owing to the increasing popularity of the thermal treatment of municipal sewage sludge (TTMSS) in Poland, constant growth in the quantity of ash generated within this process has been recorded. Due to their properties, it is difficult to utilize this type of ash within the concrete production technology. One of the methods of waste utilization is to add it to hardening slurries, used in, among others, cutoff walls. The slurry operating conditions (contact with groundwater) and elevated heavy metal content in ash raise justified concerns in terms of environmental safety of the aforementioned methods. In the study, the release of heavy metals from a matrix, namely, the hardened slurry has been examined. The so-called “batch test” dynamic leachability testing method was applied for this purpose. A high level of heavy metal immobilization in the slurry was achieved. The obtained results indicate an environmentally safe possibility of using TTMSS ash in hardening slurries in cut-off walls.
Źródło:
Environment Protection Engineering; 2020, 46, 4; 77-86
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utilization of textile denim sludge waste in high load-bearing structural applications
Wykorzystanie odpadów szlamowych z dżinsu tekstylnego w zastosowaniach konstrukcyjnych o dużej nośności
Autorzy:
Beg, Tahreem
Siddiqui, Muhammad Owais Raza
Butto, Muhammad Aslam
Iqbal, Kashif
Sun, Danmei
Powiązania:
https://bibliotekanauki.pl/articles/2202619.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
textile composite
textile effluent sludge
concrete
mortar
kompozyt tekstylny
tekstylny osad ściekowy
beton
zaprawa
Opis:
The paper presents the results of research on the utilization of textile denim sludge waste, which was used to obtain concrete and mortar. For this purpose, cement and sand were replaced with the powdered sludge in the amount of 5 and 10 wt. The sludge was initially analyzed by FTIR and XRD to identify functional groups and chemical composition, respectively. Replacing sand with sludge resulted in a significant reduction in the concrete compressive and flexural strength (> 50%). Significantly better results were obtained by replacing cement with 5 wt% of sludge. In this case, the concrete compressive strength decreased by only 14%, and the flexural strength by 15%.
W pracy przedstawiono wyniki badań dotyczące utylizacji odpadów szlamowych z dżinsu tekstylnego, których użyto do otrzymywania betonu i zaprawy murarskiej. W tym celu cement i piasek zastąpiono sproszkowanym szlamem w ilości odpowiednio 5 i 15% mas. Osad poddano wstępnej analizie za pomocą FTIR i XRD w celu zidentyfikowania odpowiednio grup funkcyjnych i składu chemicznego osadu. Zastąpienie piasku szlamem spowodowało znaczne zmniejszenie wytrzymałości betonu na ściskanie i zginanie (> 50%). Znacznie lepsze wyniki uzyskano zastepując cement szlamem. W tym przypadku wytrzymałość betonu na ściskanie zmniejszyła się tylko o 14%, a wytrzymałość na zginanie o 15%.
Źródło:
Polimery; 2022, 67, 7-8; 298--307
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wymywanie wybranych metali ciężkich z betonów zawierających popiół z termicznego przekształcania osadów ściekowych
Elution of selected heavy metals from concretes containing ashes produced in thermal conversion of sludge
Autorzy:
Wichowski, P.
Rutkowska, G.
Nowak, P.
Powiązania:
https://bibliotekanauki.pl/articles/40795.pdf
Data publikacji:
2017
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
materialy budowlane
beton
beton C16/20
komponenty
popiol lotny z termicznego przeksztalcania osadow sciekowych
metale ciezkie
wymywanie pierwiastkow
building material
concrete
component
fly ash
sewage sludge
thermal conversion
heavy metal
element leaching
Źródło:
Acta Scientiarum Polonorum. Architectura; 2017, 16, 1
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-8 z 8

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies