Temat: composite piston - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: High-quality silumin on pistons of combustion engines
Autorzy:: Jankowski, A.
Pietrowski, S.
Sieminska, B.
Szymczak, T.
Powiązania:: https://bibliotekanauki.pl/articles/245889.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
piston
composite alloys
heat treatment
thermal expansion
hysteresis
Opis:: In the paper the test results are presented for the AlSH2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 newly worked out silumin close to eutectic piston-silumin with the elevated content ofcopper and nickel to approx. 5% with relation to generally applied the AISH2 piston silumin. The novel silumin contains also Cr, Mo, In and V micro alloy additions in quantity approx. 0.05 percent for every element. Research of microstructure, HB hardness and coefficient of lineal thermal expansion a for the AlSil2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 silumin in the cast state, after the separation strengthening and additional short duration high-temperature heat-treatment were performed. Research of the microstructure of the AlSH2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 silumin showed the occurrence in it following constituent phases: alfa(Al), beta(Si), Al2Cu and AlMoCrWVMgNiSiCuFe. The separation strengthening brought about the coagulation of silicon emissions. The short duration high-temperature heat-treatment caused additional coagulation of silicon emissions and also its coalescence. Measurement of the HB hardness showed high hardness investigated alloy in the rough state, approx. 30% higher from the AlSi2 piston silumin. Measurement of the a coefficient of thermal expansion showed beneficial effects of novel alloy connected with the value decreasing of this coefficient as well so called hysteresis. Further studies on novel alloy will concentrate on alloy-additional and processes of the heat treatment.
Źródło:: Journal of KONES; 2009, 16, 4; 563-573
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Some problems pistons made from composite materials with small hysteresis to combustion engines
Autorzy:: Jankowska-Sieminska, B.
Powiązania:: https://bibliotekanauki.pl/articles/245555.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engines
combustion engine piston
composite alloys
thermal expansion
hysteresis
Opis:: Novel composite ma hysteresisterials on the pistons are characterised that they occur in them multiple intermetallic phases which crystallize in the high temperature, before crystallization of the alfa+beta (Al+Si) eutectic. For forming of pre-eutectic phases, chromium and molybdenum are introduced to silumins, and for derivation of multiple increased concentration of nickel and copper and decreased concentration of magnesium are accomplished. On the basis of evaluations of mechanical and thermal loads of combustion engines pistons applying essence of composite materials of combustion engines pistons, as well requirements for combustion engines pistons, especially high loaded engines are expressed. Test results of hardness, influence of temperature of casting, test results of mechanical properties, friction coefficient and coefficient of thermal expansion are presented in the paper. The special attention devoted to so called hysteresis coefficient of thermal expansion and hysteresis of the relative elongation in function temperature and time. Courses of coefficient of thermal expansion for standard and composite material are presented. Differences of the a coefficient during heating and cooling in function temperature are relative to kind of heat treatment. Two-stage heat treatment is beneficial for the obtainment small values of the a coefficient.
Źródło:: Journal of KONES; 2011, 18, 3; 123-128
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Researches of influence kind of piston on some parameters of the S12-U Wola diesel engine
Autorzy:: Jankowski, A.
Kołomecki, J.
Siemińska, B.
Powiązania:: https://bibliotekanauki.pl/articles/246538.pdf
Data publikacji:: 2012
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: diesel engine
engine testing
engine piston
composite alloys
emissions
fuel consumption
Opis:: Increased weight and greater requirements, regarding manoeuvring opportunities need extension of the power of combustion engines determining their powertrain units. In case of the family "W" engines, following developmental versions came into existence as a result of the modernization of the earlier version, among others thru the optimization of the combustion process, applying of the supercharging, as well as strengthening of the internal construction, which made it possible to carry greater thermal and mechanical loads. The subjects of the study were pistons made from composite materials of the small hysteresis of the alloy mounted on the S12-U combustion engine. In the novel construction of the piston, the outline of the overcoat was modified, the shape of the combustion chamber, the hole for the piston pin, grooves for the piston rings and shape of internal surfaces remained unchanged. A characteristic feature of the novel piston is the smaller hysteresis of the coefficient of thermal expansion composite alloy, alfa of which the pistons were made, whereas a so-called hysteresis is the difference of the coefficient alfa, which occurs during warming and piston cooling, and takes place during working of the piston in the combustion engine. The smaller hysteresis of the coefficient alfa makes the decreasing clearances between piston and cylinder possible, what has a beneficial influence on work parameters of the combustion engine, especially under conditions of partial loading of the engine. Basic parameters of the engine for the maximum torque characteristics and load characteristics are the object of the paper.
Źródło:: Journal of KONES; 2012, 19, 3; 185-194
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "composite piston" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język