Autor: Sroka, Z. J. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Thermodynamic cycle of combustion engine with hydrogen fuelling
Autorzy:: Sroka, Z. J.
Powiązania:: https://bibliotekanauki.pl/articles/246368.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
thermodynamics
hydrogen
Opis:: Shortage of crude oil gives the reason to look for any alternative engine fuel. One of them is the hydrogen, which will be the most lean fuel between others. Knowledge of hydrogen as an engine fuel, its properties, production and storage problems were analyzed in this paper. At the end own hydrogen concept based on Fiat engine 900ccm was shown. Theoretical comparison between thermodynamic cycles for engine run on conventional petrol and hydrogen was done. Results have given the green light to future development. Petroleum recourses run out have given the reasons to find alternative fuel. One of them could be hydrogen. According to analyze done in the project it can be found similarity between hydrogen engine with 1=1,0 to petrol engine with 1=0,9. Pressure of hydrogen charge is in this case higher of 0.42 mpa and there is calculated in strength of existing engine. The results of estimation show possibility to use hydrogen as a engine fuel, maybe first as a dual-fuel engine like LPG system. Emissions of nox for hydrogen engine as well as theoretical engine work cycles for analyzed cases are illustrated in the engine.
Źródło:: Journal of KONES; 2007, 14, 3; 573-578
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Evaluation of the thermodynamic combustion process in the engine supplied with gas having a low methane content
Ocena parametrów termodynamicznych procesu spalania w silniku zasilanym paliwem o małej zawartości metanu
Autorzy:: Piasecki, D.
Sroka, Z. J.
Powiązania:: https://bibliotekanauki.pl/articles/134156.pdf
Data publikacji:: 2013
Wydawca:: Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:: combustion engine
thermodynamics
methane
silnik spalinowy
termodynamika
metan
Opis:: Exploitation of coal deposits is accompanied by extraction of methane, which can be a fuel for internal combustion engines. Methane with other gases states mixture with different chemical composition. It is called mine gas. Differences in the composition and the ability to lean combustion is explored in this study, where the authors have focused their attention on the selected thermodynamic parameters and operating indicators of internal combustion engine. The assessment was made on the virtual engine, which is a compilation of the actual engine, demonstrating the need for assistive technology such as charging, variable valve timing and variable compression ratio. They provide energy, despite the restrictions of the poor in the methane deposits to maintain the desired output power and reduced fuel consumption by ensuring environment-friendly operation.
Eksploatacji złóż węgla kamiennego towarzyszy wydobywanie się metanu, który może stanowić paliwo do tłokowych silników spalinowych. Metan występuje w mieszaninie z innymi gazami i stanowi tzw. gaz kopalniany o zróżnicowanym składzie chemicznym. Różnice w składzie oraz możliwość spalania mieszanek ubogich jest przedmiotem rozważań w niniejszej pracy, gdzie autorzy skupili swoją uwagę na wybranych parametrach termodynamicznych i wskaźnikach pracy silnika spalinowego. Ocenę dokonano na wirtualnym silniku, będącym kompilacją silników rzeczywistych, wykazując konieczność stosowania technik wspomagających jak: doładowanie, zmienne fazy rozrządu czy zmienny stopień sprężania. Zapewniają one mimo ograniczeń energetycznych związanych z ubogimi w metan złożami gazu kopalnianego utrzymanie na pożądanym poziomie mocy paliwowej, a przez zmniejszone zużycie paliwa zagwarantowanie proekologicznej eksploatacji.
Źródło:: Combustion Engines; 2013, 52, 3; 800-805
2300-9896
2658-1442
Pojawia się w:: Combustion Engines
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: An impact of engine downsizing on change of engine weight
Autorzy:: Sroka, Z. J.
Cieślak, M.
Powiązania:: https://bibliotekanauki.pl/articles/247468.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
downsizing
weight change
Opis:: One of the trends for development of internal combustion engine is downsizing, which in its final form leads to reduction of fuel consumption and limitation of carbon dioxide concentration in the exhaust gases. The obvious effect of reducing the volume of a cylinder is to reduce the dimensions of the various components, e.g. piston with rings and pin, connecting rod, crankshaft, engine block etc. Changes of geometric dimensions also affect the change in mass of each element and consequently − the whole engine. Expected weight reduction will be a benefit in considering downsizing techniques as another significant development trend in automotive applications associated with a reduction in the weight of the complete vehicle – called “light weight vehicle”. The paper discusses the various forms of downsizing (by stroke, by diameter and mix) and their impacts on the changes in engine mass. The engine Subaru Flat 4, constructed with standard components in terms of design and materials was tested by virtual recognition in mass changes. Original drawings of components and sets have been simplified by for example does not account for chamfers and chops. When calculating also omitted the weight of typical accessories (e.g. fuel lines or electronic components), assuming that each considered option has the same equipment. The highest change in the weight of minus 7.27 % relative to the standard engine was done with downsizing by diameter and smallest one (-6.09 %) by downsizing mix.
Źródło:: Journal of KONES; 2015, 22, 2; 213-219
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Assessment of the engine boost modernized according to the rules of downsizing
Autorzy:: Sroka, Z. J.
Paropkari, M.
Powiązania:: https://bibliotekanauki.pl/articles/243541.pdf
Data publikacji:: 2015
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
downsizing
boosting
Opis:: Downsizing is one of the development trends of internal combustion engine due to its direct impact on fuel economy and indirectly in reducing the emission of carbon dioxide into the atmosphere. Changing the displacement associated with the same engine performance needs support by additional systems, which primarily include the boost. This paper describes downsizing idea, a review of recharging methods and thermodynamic analysis of the combustion process for the chosen engine before and after downsizing taking into account the different variants of boost. The core objective of this study is to downsize a naturally aspirated 1.6L BMW PSA engine by 25% of its initial swept volume and then boosting downsized engine with higher-pressure ratio using the turbocharger set. The study focuses on the analysis of four turbochargers from Garrett turbos. The study winds up with the analysis of engine performance based on the values of compression ratio, air-fuel ratio, polytropic exponents of compression and decompression with keeping the same chemical composition of the fuel. At the end, study was resulted with turbocharger Garrett GT1548 as a the best solution form considered ones, because of: wide range of pressure rate, reasonably sufficient for the engine of this size, enough room (60%) for extracting better performance, lower compression ratio value, which counts the rise of brake mean effective pressure, although to a very little extent and leaner mixture at 1,20 value of the air/fuel ratio with maximum power and reduction of fuel consumption, what was satisfied for downsizing techniques.
Źródło:: Journal of KONES; 2015, 22, 3; 235-239
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: An effect of physical and chemical properties of commercial diesel fuels on engine parameters
Autorzy:: Sroka, Z. J.
Reksa, M.
Kułażyński, M.
Powiązania:: https://bibliotekanauki.pl/articles/242752.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: combustion engine
diesel engine
engine fuels engine performances
Opis:: This paper is focused on problem of quality of diesel commercial fuels in Polish market and an effect of their properties as well on engine parameters as environment The academic staff from Wrocław University of Technology put the own experience to the huge discussion by making research in the Wroclaw-city, where some probes of fuels were taken from six different commercial fuel stations. Chemical and physical properties of fuels were checked. A real diesel engine VW 1,9 TDI was investigated in university lab of Division of Motor Vehicles and Internal Combustion Engines. Typical engine performances were built including power, torque, fuel consumption, toxicity levels due to different fuels. The IC engine on the test bench, oxygen content in fuels, example of full load performance of VW1,9 TDI for fuel Bio D20-type, differences of mean effective pressure for different fuels, differences of carbon monoxide in exhaust for different fuels, differences of nitric oxides in exhaust for different fuels, differences of smog level in exhaust for different fuels, differences of heat release for different fuels, relation between engine torque and oxygen content in fuels vs. engine rotation are presented in the paper.
Źródło:: Journal of KONES; 2007, 14, 4; 447-452
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: A method of engines’ diagnosis in operationA method of engines’ diagnosis in operationA method of engines’ diagnosis in operation
Autorzy:: Sitnik, L.J.
Sroka, Z. J.
Wróbel, R.
Powiązania:: https://bibliotekanauki.pl/articles/245541.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
combustion engine
engine diagnostic
diagnostic methods
engine technical conditions
Opis:: It was found that there are discrepancies between the values of diagnostic parameters obtained in the test and natural exploitation. In addition, no appropriate tests are carried out which would be based on the degree of engine degradation in long-term natural use. One of the reasons is the lack of adequate, non-invasive diagnostic methods. The aim of the work was to show the possibility of creating a new diagnostic parameter of combustion engines in their natural operation. The parameter can be determined by a new method (presented in the article). The method is based on the assumption that the technical condition of the engine can be judged on the basis of the run-up curve, and in particular, on the basis of the linear direction coefficient, which is approximated by the points of the run-up curve at particular moments of the run-up. An additional requirement is that the points of the run-up curve are the average value of the speed from many runs. In addition, the statistical distributions of the speed values in the individual moments of the run-up should be of the same type. The direction coefficient of the straight line determined is a diagnostic parameter. The value of the new coefficient is the value of the straight-line factor. Further works are underway to determine the relationship between the directional coefficient and the technical condition of the engine.
Źródło:: Journal of KONES; 2018, 25, 3; 403-410
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Sroka, Z. J." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język