Autor: Kulczycki, A. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Low temperature properties of fuel mixtures of kerosene and fame type used to supply turbine engines in marine and other non-aeronautical applications
Autorzy:: Dzięgielewski, W.
Gawron, B.
Kulczycki, A.
Powiązania:: https://bibliotekanauki.pl/articles/260024.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: jet fuel
biocomponents
marine turbine engine
low temperature properties
Opis:: A worldwide trend to popularise gradually increasing use of biofuels in various applications was a motivation for gaining interest in FAME as a commonly available biocomponent to fuels combusted in turbine engines. These engines are mainly used in aeronautics, but many of them are also used in other, non-aeronautical areas, including marine navigation. Specific conditions in which fuels are combusted in turbine engines used in these applications are the reason why fuel mixtures of kerosene and FAME type should reveal relevant low temperature characteristics. The article presents results of tests of low temperature properties of mixtures of the jet fuel Jet A-1 and methyl esters of higher fatty acids (FAME). The prepared mixtures contained different contents of FAME. The obtained results present changes of: viscosity, cloud point, pour point, crystallising point, and cold filter plugging point, depending on the percentage by volume of FAME. They also prove that the course of changes of low temperature properties of these mixtures is affected by chemical structure of the biocomponent.
Źródło:: Polish Maritime Research; 2015, 2; 101-105
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Ocena smarności mieszanin estrów metylowych kwasów tłuszczowych otrzymywanych z olejów roślinnych w oleju napędowym
Assessment of lubricity of mixtures of fatty acid methyl esters derived from vegetable oils in fuel oil
Autorzy:: Sułek, M.W.
Kulczycki, A.
Małysa, A.
Powiązania:: https://bibliotekanauki.pl/articles/190472.pdf
Data publikacji:: 2009
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: olej napędowy
współczynnik tarcia
smarność
zużycie
biopaliwa
estry metylowe kwasów tłuszczowych
biokomponent
diesel fuel
friction coefficient
lubricity
wear
biofuels
fatty acid methyl esters
biocomponents
Opis:: Przedstawione rezultaty badań są częścią programu badawczego, w którym dokonano optymalizacji składu kompozycji oleju napędowego z dodatkami estrów metylowych kwasów tłuszczowych (FAME – Fatty Acid Methyl Esters) otrzymanych z olejów roślinnych, które znalazłyby zastosowanie jako ekologiczne paliwa do silników z zapłonem samoczynnym (diesla). Jako potencjalne dodatki modyfikujące właściwości smarne oleju napędowego zaproponowano roztwory mieszanin FAME. Dla wytypowanych kompozycji biopaliw wykonano badania tribologiczne, z wykorzystaniem aparatu realizującego ruch posuwisto-zwrotny kulki po płaszczyźnie z wysoką częstotliwością (HFRR – High Frequency Reciprocating Ring – Ball-on-Flat). Badania prowadzone były dla: skojarzenia materiałowego stal–stal i styku skoncentrowanego. Właściwości tribologiczne określono przez: opory ruchu, zużycie i stopień pokrycia filmem smarnym. Celem przeprowadzonych badań było podjęcie próby otrzymania korelacji między mierzonymi wielkościami charakteryzującymi tarcie a udziałem procentowym biododatków w oleju napędowym. Wykazano, że już przy 10% udziale dodatku mieszaniny FAME z oleju rzepakowego z FAME z oleju słonecznikowego w stosunku 1:1 w oleju napędowym, współczynnik tarcia maleje o ok. 30%, a zużycie zmniejsza się prawie dwukrotnie względem oleju napędowego, co może być wynikiem wzrostu trwałości filmu smarnego.
The results presented are a part of the research program aimed at the optimisation of diesel fuel containing fatty acid methyl esters (FAME) derived from vegetable oils. The esters could be applied as an ecological fuel for diesel engines. FAME solutions were proposed as additives modifying the lubricity of diesel fuel. For the bio-diesels selected, tribological tests using high frequency reciprocating ring ball-on-flat apparatus were performed. The tests were carried out for steel-steel and concentrated contact. The tribological properties are described as motion resistance and the level of coverage by the lubricating film. The purpose of the research was to determine the correlation between the friction characteristics measured and the content of bio-additives in diesel fuel. It was proved that, at 10% content of the mixtures, the friction coefficient was reduced by 20% and wear was reduced 2-fold, as compared to diesel oil. This can be a result of an increase of the durability of the lubricating film.
Źródło:: Tribologia; 2009, 4; 189-197
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Butanol/biobutanol as a component of an aviation and diesel fuel
Autorzy:: Dzięgielewski, W.
Gawron, W.
Kaźmierczak, U.
Kulczycki, A.
Powiązania:: https://bibliotekanauki.pl/articles/247384.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: aviation
diesel fuels
biocomponents
CO2 emission
Opis:: This paper describes the analysis and conclusions regarding the use of butanol/biobutanol as a component of conventional mineral fuels employed in different areas of transportation. Butanol from biomass - biobutanol is interesting as biocomponent of gasoline, diesel fuel as well as aviation fuels. This is especially important in case of air transport, which is the carbon dioxide emission source of the fastest growth. Biobutanol is tested as biocomponent of gasoline, including aviation ones, but there are no information about biobutanol added to mineral Jet fuel as well as diesel fuel. Direction of research conducted by leading aviation companies indicates that hydrocarbon biocomponent will be main biofuel used as aviation turbine fuel. One of reported technology is focused on use of butane-1-ol as semi-finished products for isoparaffinic hydrocarbons generation that then would be used for aviation turbine fuels production. In order to do such analysis the preliminary lab testing of blends of butanol isomers with aviation fuel Jet A-1 and diesel fuel were performed. The paper contains the results of standard tests for blends of mineral fuels with butane-1-ol and butane-2-ol added in concentration of 0-20 %(V/V). Both the advantages and disadvantages regarding the use of such component of mineral fuels are presented. Butanol decreases value of flash point and significantly influence on conductivity of Jet fuel. In case of aviation fuel for turbine engines, and diesel fuel, the restrictions regarding direct use of butanol are important. However, butanol can be treated as semi-finished material for synthesizing of biohydrocarbons used in above applications.
Źródło:: Journal of KONES; 2014, 21, 2; 69-75
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The method, based on storage simulator and IR – VIS spectroscopy, for predicting the allowable time of storage of biocomponents for CI engines
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Okniński, R.
Stefanowicz, P.
Powiązania:: https://bibliotekanauki.pl/articles/242434.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: fuel
fuel aging
oils
lubrication
biocomponents
Opis:: The paper presents the results of investigations concerning a new method used for predicting the allowable time of storage of biocomponents – FAME. The method was based on laboratory research carried out with the use of a storage tank simulator. The aging process was carried out in the conditions increasing the reaction rate – at high temperature. There are several methods/procedures used for predicting the allowable time of storage of fuels and biocomponents – FAME, but all of them are based on tests at the temperature so high that the mechanism of aging process is different than the one observed in storage tanks. It was assumed that the aging process could be divided into two stages: at the first stage, the aging precursors are created and at the second stage, precursors are converted into the fuel aging products. These products lead to changes in fuel properties. The kinetics of precursor creation determines the rate of all reactions, which lead to the final aging products. It was found that the rate of reaction at the first stage of fuel aging can be effectively increased by an increase in temperature and even relatively high temperature does not change the mechanism of the creation of aging precursors. The method that has been worked out makes it possible to control the mechanism of aging process during quick laboratory tests. The products of aging processes were detected with the use of the IR-VIS spectrometry. The allowable time of storage was determined for several FAME samples on the basis of quick laboratory tests. The results of laboratory quick tests were verified by comparing them with the results of the aging process of FAME in storage tanks. On the basis of the test results, the algorithm of allowable time of FAME storage calculation was worked out.
Źródło:: Journal of KONES; 2016, 23, 1; 115-121
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The new stand for aging of biocomponents and biofuels process testing at relatively short time
Autorzy:: Dzięgielewski, W.
Kaźmierczak, U.
Kulczycki, A.
Okniński, R.
Stefanowicz, P.
Powiązania:: https://bibliotekanauki.pl/articles/949517.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: biofuels
biocomponents
ageing process
test bench
method of measuring
Opis:: In the paper, the concept of a model bench for accelerated ageing of bio-components and biofuels was presented. It is used to simulate the ageing process of biofuels and components of vegetable or animal origin, taking place during storage in the storage tanks. The construction of the bench’s essential elements and its equipment were designed and implemented in such a way as to mostly reflect actual storage conditions in large capacity tanks. An additional and unprecedented function of the bench includes the possibility to simulate the product transport conditions. Furthermore, a method of the test, with the use of simultaneously performed traditional tests on the physical and chemical properties monitored in the process of storage was presented. An analysis of the relation between values of the parameters obtained with different methods (on the model bench and under laboratory conditions) was conducted. In addition, their usefulness to assess the impact of logistic processes on the product quality was presented. In the paper, the results of the work executed within the framework of the project “Development of a prototype of the monitoring system the ageing rate and degree of bio-components and biofuels” within the Program Innovative Economy Operational Programme, Measure 1.4. “Support for goal-oriented projects” were used.
Źródło:: Journal of KONES; 2016, 23, 2; 105-112
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Kulczycki, A." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język