Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "concrete sludge" wg kryterium: Temat


Wyświetlanie 1-5 z 5
Tytuł:
The effect of adding slag, achieved from wastewater sludge incineration in fluidized-bed furnace, on the quality of concrete
Autorzy:
Pietrzak, Alina
Powiązania:
https://bibliotekanauki.pl/articles/104162.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
concrete
ash
sewage sludge
concrete quality
beton
popiół
osady ściekowe
jakość betonu
Opis:
Due to a constant increase in generating the amount of sewage waste it is necessary to find an alternative method of its use or disposal. One of such methods can be utilization of sewage sludge in construction materials industry, particularly in concrete technology and other materials based on cement. It allows using waste materials as a passive additive (filler) or also as an active additive (replacement of part of bonding material). The article aims at presenting the analysis of the effect of adding slag, achieved from wastewater sludge incineration in sewage treatment plant, on properties and quality of concrete mix and hardened concrete. Using an experimental method, the researcher designed the composition of the control concrete mix, which was then modified by means of slag. For all concrete mixtures determined – air content with the use of pressure method and consistency measured by the use of concrete slump test. For all concrete series the following tests were conducted: compressive strength of concrete after 7, 28 and 56 days of maturing, frost resistance for 100 cycles of freezing and thawing, water absorption. The use of slag, ground once in the disintegrator, causes a decrease of in compressive strength of concrete samples in relation to the control concrete series as well as bigger decrease in compressive strength after frost resistance test.
Źródło:
Quality Production Improvement - QPI; 2019, 1, 1; 244-250
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ popiołów powstałych ze spalania osadów ściekowych na podstawowe właściwości mechaniczne betonu
The effect of ashes generated from the combustion of sewage sludge on the basic mechanical properties of concrete
Autorzy:
Pietrzak, Alina
Powiązania:
https://bibliotekanauki.pl/articles/2065520.pdf
Data publikacji:
2019
Wydawca:
Politechnika Częstochowska
Tematy:
beton
popiół
osady ściekowe
właściwości betonu
concrete
ash
sewage sludge
concrete properties
Opis:
Przedstawiono analizę wpływu dodatku popiołu, powstałego ze spalania osadów ściekowych w oczyszczalniach ścieków, na właściwości stwardniałego betonu. Metodą doświadczalną zaprojektowano skład mieszanki betonowej kontrolnej, którą następnie modyfikowano przy użyciu popiołu lotnego. Dla wszystkich uzyskanych serii betonów wykonano badania: wytrzymałości na ściskanie betonu po 7, 28 i 56 dniach dojrzewania, mrozoodporności dla 100 cykli zamrażania i rozmrażania, nasiąkliwości. Betony modyfikowane popiołem powstałym ze spalania osadów ściekowych charakteryzowały się porównywalną wytrzymałością na ściskanie w stosunku do betonu kontrolnego oraz odnotowały niższy spadek wytrzymałości na ściskanie po badaniu mrozoodporności.
The article presents an analysis of the impact of fly ash addition, which originated from the combustion of sewage sludge in sewage treatment plants, on the properties of hardened concrete. The composition of control concrete mixture was designed using the experimental method, and then it was modified using fly ash. For all concrete series obtained, tests were performed: compressive strength of concrete after 7, 28 and 56 days of maturation, frost resistance for 100 cycles of freezing and thawing, and absorbability. Ash-modified concretes formed from the combustion of sewage sludge were characterized by comparable compressive strength in comparison to the control concrete and recorded a lower drop in compressive strength after the frost resistance test.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2019, 8, 1; 29--35
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental aspect of using ash from thermal treatment of municipal sewage sludge in hardening slurries
Autorzy:
Szarek, Łukasz
Krysiak, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/2032877.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ash
concrete
municipal sewage sludge
heavy metals
popiół
beton
komunalny osad ściekowy
metale ciężkie
Opis:
Owing to the increasing popularity of the thermal treatment of municipal sewage sludge (TTMSS) in Poland, constant growth in the quantity of ash generated within this process has been recorded. Due to their properties, it is difficult to utilize this type of ash within the concrete production technology. One of the methods of waste utilization is to add it to hardening slurries, used in, among others, cutoff walls. The slurry operating conditions (contact with groundwater) and elevated heavy metal content in ash raise justified concerns in terms of environmental safety of the aforementioned methods. In the study, the release of heavy metals from a matrix, namely, the hardened slurry has been examined. The so-called “batch test” dynamic leachability testing method was applied for this purpose. A high level of heavy metal immobilization in the slurry was achieved. The obtained results indicate an environmentally safe possibility of using TTMSS ash in hardening slurries in cut-off walls.
Źródło:
Environment Protection Engineering; 2020, 46, 4; 77-86
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utilization of textile denim sludge waste in high load-bearing structural applications
Wykorzystanie odpadów szlamowych z dżinsu tekstylnego w zastosowaniach konstrukcyjnych o dużej nośności
Autorzy:
Beg, Tahreem
Siddiqui, Muhammad Owais Raza
Butto, Muhammad Aslam
Iqbal, Kashif
Sun, Danmei
Powiązania:
https://bibliotekanauki.pl/articles/2202619.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
textile composite
textile effluent sludge
concrete
mortar
kompozyt tekstylny
tekstylny osad ściekowy
beton
zaprawa
Opis:
The paper presents the results of research on the utilization of textile denim sludge waste, which was used to obtain concrete and mortar. For this purpose, cement and sand were replaced with the powdered sludge in the amount of 5 and 10 wt. The sludge was initially analyzed by FTIR and XRD to identify functional groups and chemical composition, respectively. Replacing sand with sludge resulted in a significant reduction in the concrete compressive and flexural strength (> 50%). Significantly better results were obtained by replacing cement with 5 wt% of sludge. In this case, the concrete compressive strength decreased by only 14%, and the flexural strength by 15%.
W pracy przedstawiono wyniki badań dotyczące utylizacji odpadów szlamowych z dżinsu tekstylnego, których użyto do otrzymywania betonu i zaprawy murarskiej. W tym celu cement i piasek zastąpiono sproszkowanym szlamem w ilości odpowiednio 5 i 15% mas. Osad poddano wstępnej analizie za pomocą FTIR i XRD w celu zidentyfikowania odpowiednio grup funkcyjnych i składu chemicznego osadu. Zastąpienie piasku szlamem spowodowało znaczne zmniejszenie wytrzymałości betonu na ściskanie i zginanie (> 50%). Znacznie lepsze wyniki uzyskano zastepując cement szlamem. W tym przypadku wytrzymałość betonu na ściskanie zmniejszyła się tylko o 14%, a wytrzymałość na zginanie o 15%.
Źródło:
Polimery; 2022, 67, 7-8; 298--307
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wymywanie wybranych metali ciężkich z betonów zawierających popiół z termicznego przekształcania osadów ściekowych
Elution of selected heavy metals from concretes containing ashes produced in thermal conversion of sludge
Autorzy:
Wichowski, P.
Rutkowska, G.
Nowak, P.
Powiązania:
https://bibliotekanauki.pl/articles/40795.pdf
Data publikacji:
2017
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
materialy budowlane
beton
beton C16/20
komponenty
popiol lotny z termicznego przeksztalcania osadow sciekowych
metale ciezkie
wymywanie pierwiastkow
building material
concrete
component
fly ash
sewage sludge
thermal conversion
heavy metal
element leaching
Źródło:
Acta Scientiarum Polonorum. Architectura; 2017, 16, 1
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-5 z 5

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies