Temat: mounted - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Modelling of physical phenomena in the vertical velocity measuring circuit for process of designing the SWPL-1 helmet-mounted display system
Autorzy:: Michalak, S.
Żyluk, A.
Szelmanowski, A.
Borowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/243481.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
avionics
helmet-mounted display systems
error
vertical velocity measurement
Opis:: The article presents the selected methods of identifying static and dynamic properties of the measuring paths to the extent necessary for the proper integration of on-board systems with the helmet-mounted flight parameter display system. It presents the methods of identifying static and dynamic properties of the WR-10MK on board variometer as one of more difficult identification elements. Its identification was carried out on the basis of the basic dependencies of the International Standard Atmosphere and the instruments construction’s parameters. It built a mathematical model describing the physical phenomena associated with vertical speed measurement. This model differs from the models found in the literature in terms of detail and description accuracy. On this basis, in the Simulink environment, it built a simulation model corresponding to its mathematical model. The non-linear model was the starting point for the construction of the linearized model based on the operator transmittance. The developed models were evaluated for errors of vertical speed’s dynamic indications. This allowed assessing the usefulness of the individual models for further works on ensuring the correlation of indications of the on-board variometer and the SWPL-1 helmet-mounted flight parameter display system. The presented simulation models include design details, as well as the characteristics of technological errors and disturbances of a stochastic nature. Another approach to the issue of identification is to use the characteristics provided by the manufacturer in the form of approximate characteristics of a module.
Źródło:: Journal of KONES; 2018, 25, 4; 277-284
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Ato choose variants of hardware architecture for the SWPL-1 helmet-mounted display system
Autorzy:: Michalak, S.
Kowalczyk, H.
Szelmanowski, A.
Borowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/241745.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
avionics
helmet-mounted display systems
hardware architecture
multi-criteria optimization
Opis:: The paper presents the structure and basic properties of the SWPL-1 helmet-mounted flight parameter display system, constructed for the Mi-17 helicopter with analogue systems and on-board instruments. It describes the basic components of the SWPL-1 system and on board components cooperating with the SWPL-1 system necessary to ensure the imaging system’s operation (including the ADU-3200 central unit for aerodynamic data and the GPS-155XL satellite signals receiver). It presents the architecture, the principle of operation, and the main constituents of the SWPL-1 helmet-mounted flight parameter system, as well as the standards of data transmission used in digital communication between the SWPL-1 system and on-board systems (installed on the Mi-17 helicopter). It describes the scope and manner of pilot and navigation data presentation as well as control of drive unit operation parameters in detail. It presents selected optimization methods for tasks executed in the helmet mounted system’s life cycle. The particular stages of the life cycle were described in detail, from the earliest stages of needs identification, through the analytic and conceptual phase, then the implementation stage, and ending with the operation stage. It introduces tasks for optimization and related methods into the process of creating the new system at every stage of its implementation. It presents one of the methods of multi-criteria optimization based on the experts’ assessment of choice of a variant of the helmet-mounted flight parameter display system’s hardware architecture in detail.
Źródło:: Journal of KONES; 2018, 25, 4; 285-292
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The magnetic field curvature correction algorithm dedicated for helmet mounted cueing systems
Autorzy:: Adamski, M.
Szelmanowski, A.
Powiązania:: https://bibliotekanauki.pl/articles/949523.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: transport
avionics
helmet-mounted cueing systems
errors of the angular positioning
magnetic field measurement
flat coil profile modelling
Opis:: The article presents the new built in Poland helmet mounted cueing system NSC-1 Orion with a magnetic method, dedicated to the multi-purpose helicopters W-3PL Gluszec. This system uses the magnetic field generated by the system of three mutually orthogonal electric coils. The principle of operation of this system is described and the method of determining the angular position of the pilot's helmet relative to the helicopter's cabin using the reference magnetic field and the directional cosines matrix are discussed. Electrical flat coils, constructed in the Polish Air Force Institute of Technology (AFIT), generating a magnetic field with curved symmetry axis characteristics, causing errors in determining the angular position of the pilot's helmet are shown. As a way to minimize these errors, an original proprietary algorithm for correcting the negative impact of the magnetic field curvature generated by the on-board system has been presented. Mathematical relations describing the presented correction process as well as selected results of simulation and experimental investigations in the area of inaccuracy of the "before" and "after" systems of applying the developed algorithm were given. Inaccuracies determined from computer simulations of the developed mathematical relations were compared with experimental data from magnetic field measurements using the integrated three-axis sensor ADIS-16405, used in the laboratory of the AFIT Avionics Division for helmet control of the angular position of the moving observation and sighting head and reflector-search light.
Źródło:: Journal of KONES; 2018, 25, 2; 15-30
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Implementacja wymagań standardu DO-178C w procesie tworzenia oprogramowania awionicznego dedykowanego dla nahełmowego systemu zobrazowania SWPL-1 CYKLOP
Implementation of DO-178C standard requirements in the development process of avionic software dedicated to the SWPL-1 CYKLOP helmet-mounted flight parameter imaging system
Autorzy:: Pazur, A.
Szelmanowski, A.
Borowski, J.
Michałowski, P.
Powiązania:: https://bibliotekanauki.pl/articles/313301.pdf
Data publikacji:: 2017
Wydawca:: Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:: nahełmowy system zobrazowania
SWPL-1 CYKLOP
awionika
standard DO-178C
helmet-mounted imaging system
avionics
DO-178C standard
Opis:: W artykule przedstawiono wybrane wyniki prac analitycznych i konstrukcyjnych realizowanych w Instytucie Technicznym Wojsk Lotniczych (ITWL) w zakresie możliwości implementacji wymagań standardu DO-178C w procesie tworzenia oprogramowania awionicznego dedykowanego dla nahełmowego systemu zobrazowania SWPL-1 CYKLOP, zbudowanego w ITWL. Na przykładzie oprogramowania tworzonego dla komputera graficznego KG-1, zarządzającego trybami pracy systemu SWPL-1, oraz układu dopasowania sygnałów UDS-1, zilustrowano spełnienie wybranych wymagań standardu DO-178C.
The paper presents the selected results of analytical and construction works implemented in Air Force Institute of Technology in terms of possibilities of implementation of DO-178C standard requirements in the process of developing the avionic software dedicated to the SWPL-1 CYKLOP helmet-mounted imaging system, constructed in Air Force Institute of Technology (AFIT). In the general part of the paper, DO-178C requirements on the adopted safety level of software developed for the SWPL-1 system, were presented. In the detailed part, the methods for implementation of DO-178C requirements, applied in the development process of software for the SWPL-1 system, were discussed. On the basis of the software developed for KG-1 graphic computer, which manages operating modes of the SWPL-1 system and UDS-1 conditioning system of signals, the fullfilment of DO-178C standard requirements was illustrated.
Źródło:: Autobusy : technika, eksploatacja, systemy transportowe; 2017, 18, 12; 351-358, CD
1509-5878
2450-7725
Pojawia się w:: Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "mounted" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język