Autor: Budzik, G. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Methodology of measurement aeronautical bevel gears utilizing an optical 3D scanner using white and blue light
Metodyka pomiarów stożkowych kół zębatych przekładni lotniczej za pomocą optycznego skanera 3D z zastosowaniem światła białego i niebieskiego
Autorzy:: Budzik, G.
Dziubek, T.
Powiązania:: https://bibliotekanauki.pl/articles/328467.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:: diagnostics
bevel gear
aircraft gearbox
optical scanner
diagnostyka
stożkowe koło zębate
przekładnia lotnicza
skaner optyczny
Opis:: Accuracy diagnostics bevel gears of aircraft gearbox has become a key component in today’s manufacturing process. Properly prepared and carried out the measurement process of bevel gears determines its accuracy, productivity and the production costs of aeronautical gearbox. In the process of assessing the accuracy of manufacturing, majority of manufacturers of bevel gears use specialized contact coordinate measuring machines. Therefore, this article depicts different perspective on measurements of bevel gears using a universal measuring device, which is an optical 3D scanners ATOS, using in the process of measuring white and blue light. Due to the use of the optical scanners ATOS in measurement process, it was necessary to develop a methodology dealing with the process of assessing and accuracy, in order to achieve the desired results of measurement. The studies take into account the economic aspects of the use of technical diagnostics in the production process. The article presents an analysis of conditions and developed rules concerning the preparation of a model for measurement. It also contains hints and a description of the measurement process. Furthermore, it depicts the rules specifying the interpretation of measurement results as well as the technical rules of their realization.
Diagnostyka dokładności wykonania stożkowych kół zębatych przekładni lotniczych stała się obecnie kluczowym elementem procesu ich wytwarzania. Odpowiednio przygotowany i przeprowadzony proces pomiaru stożkowych kół zębatych determinuje jego dokładność, wydajność oraz koszty produkcji przekładni. Większość producentów stożkowych kół zębatych w procesie oceny dokładności wykonania, stosuje specjalistyczne stykowe współrzędnościowe maszyny pomiarowe. Dlatego niniejszy artykuł będzie innym spojrzeniem na pomiary stożkowych kół zębatych z zastosowaniem uniwersalnego urządzenia pomiarowego, jakim są optyczne skanery 3D ATOS wykorzystujące w procesie pomiaru białe i niebieskie światło. Z uwagi na zastosowanie w procesie pomiaru optycznych skanerów Atos, w celu osiągnięcia pożądanych wyników pomiarów niezbędne było opracowanie metodologii dotyczącej przebiegu procesu pomiaru oraz oceny dokładności. Przeprowadzone badania uwzględniają ekonomiczne aspekty zastosowania diagnostyki technicznej w przebiegu procesu produkcyjnego. Artykuł przedstawiał będzie analizę warunków oraz opracowane zasady dotyczące przygotowania modelu do pomiaru. Zawarte zostaną w nim również wskazówki oraz opis samego procesu pomiaru. Ponadto przedstawiono zasady określające interpretację wyników pomiarów wraz z technicznymi zasadami ich wykonania.
Źródło:: Diagnostyka; 2015, 16, 1; 51-56
1641-6414
2449-5220
Pojawia się w:: Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Automated measurement of bevel gears of the aircraft gearbox using GOM
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Powiązania:: https://bibliotekanauki.pl/articles/242283.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gear
aircraft gearbox
coordinate measuring technique
Opis:: Manufacture of aircraft gearbox elements requires control of gear geometric parameters at different stages of technological process. Acceleration and automation of measurement process can affect the duration of the finished item production. In case of measurement of gear wheels using modern technologies based on numerical machines, measurement process is based on processing of numerical data obtained by measurement using coordinate measuring machines. The goal of this paper is to present the opportunity to automate the measurement process of bevel gears, using coordinated optical scanner ATOS by GOM, equipped with a turntable. Using coordinate measuring technique, you can specify a set of methods and procedures for the designation of the complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. The topics included in the article are intended to show the capabilities of the device used to improve the measurement process and shorten its time, and hence, lower its costs. Another thing described in the paper is the impact of measurement performance in automatic mode on the quality of performance - the numerical image of scanned surface, from the standpoint of accuracy and number of collected data points in the shortest time. The article includes an analysis of conditions related to the measurement works, such as the process ofpreparing the model and measurement equipment and data processing capacity. The result of the work will be presented methodology for automated scanning measurements of bevel Sears.
Źródło:: Journal of KONES; 2011, 18, 2; 287-292
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Automated measurement of bevel gears of the aircraft gearbox using GOM
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Powiązania:: https://bibliotekanauki.pl/articles/247190.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gear
aircraft gearbox
coordinate measuring technique
Opis:: Manufacture of aircraft gearbox elements requires control of gear geometric parameters at different stages of technological process. Acceleration and automation of measurement process can affect the duration of the finished item production. In case of measurement of gear wheels using modern technologies based on numerical machines, measurement process is based on processing of numerical data obtained by measurement using coordinate measuring machines. The goal of this paper is to present the opportunity to automate the measurement process of bevel gears, using coordinated optical scanner ATOS by GOM, equipped with a turntable. Using coordinate measuring technique, you can specify a set of methods and procedures for the designation of the complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. The topics included in the article are intended to show the capabilities of the device used to improve the measurement process and shorten its time, and hence, lower its costs. Another thing described in the paper is the impact of measurement performance in automatic mode on the quality of performance - the numerical image of scanned surface, from the standpoint of accuracy and number of collected data points in the shortest time. The article includes an analysis of conditions related to the measurement works, such as the process of preparing the model and measurement equipment and data processing capacity. The result of the work will be presented methodology for automated scanning measurements of bevel Sears.
Źródło:: Journal of KONES; 2011, 18, 4; 259-264
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Methods of measurement of cylindrical gear air, gear with standard software CMM
Autorzy:: Budzik, G
Dziubek, T.
Kozik, B
Zaborniak, M.
Powiązania:: https://bibliotekanauki.pl/articles/245478.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gear
cylindrical gear
aircraft gearbox
coordinates measuring technique
Opis:: Air gears must meet high performance criteria for accuracy; therefore, quality control is necessary for their production. CMM Software determines the capabilities and scope of the measuring machines. Measuring machines equipped with specialized software for the measurement of the gears are commercially available. An example might be a company offering Wenzel TGEAR XY software. This specialized software for the measurement of gears allows fully automatic measurement of the contour deviation (involute), line tooth pitch, and radial run out, tooth flank topography. If you do not have a special software to measure the gear, you require a measurement process based on 3D CAD model of the gear. It is necessary in this case, the preparation of a strategy based on measurements of 3D CAD model and load points or paths with the CAD model. The results of the measurement refer to the CAD model treating it as the nominal model. Item will present the methodology of measurement of cylindrical gears using a standard CMM software. Cylindrical gears can be measured through non-contacting or contacting methods – measuring point or scanning. The choice of measurement method should be carried out taking into account the accuracy of gear and taking into account the capabilities of the system and measurement needs. An important advantage of the measurement using the gears multipurpose measuring software is that it is possible to measure any geometry of the wheels in relation to the CAD model. Using this measurement strategy avoids the need to purchase additional software, the measuring machine and its setup. You should only choose a method of analysis that will be carried out directly in the environment-measuring machine, or will be made in the CAD system based on the geometry acquired during the measurement with respect to the virtual model. In the second case, export is needed in the appropriate format measurement data to CAD software.
Źródło:: Journal of KONES; 2014, 21, 1; 37-42
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The determination of accuracy of test gear wheel for aeronautical dual - power path gear before heat treatment
Autorzy:: Dziubek, T.
Budzik, G.
Kozik, B.
Sobolewski, B.
Powiązania:: https://bibliotekanauki.pl/articles/241821.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: gear
aircraft gearbox
coordinate measuring technique
dual-power path gear
Opis:: Manufacture of aircraft gearbox elements requires control of gear geometric parameters at different stages of technological process. In case of measurement of gear wheels using modern technologies based on numerical machines, measurement process is based on processing of numerical data obtained by measurement using coordinate measuring machines. The goal of this paper is to present the measurement process of gears, using coordinated optical scanner ATOS II TripleScan by GOM, equipped with a turntable. The aim of this study is to develop and execute the analysis accuracy of the geometry of the gear of aeronautical dual-power path gear after the roughing operation using optical coordinate measuring methods. Executed research will enable the detection of errors occurring in the machining process and to determine the value of founded the machining allowance finishing in relation to the CAD model. Using coordinate measuring technique, one can specify a set of methods and procedures for the designation of the complex dimensions of physical objects and transform them into a computer program space of coordinate measuring devices. On this basis, it is possible to determine the accuracy of the gear wheel as the workpiece prior to heat treatment. The results will be the basis to determine the effect of heat treatment on changes in the geometry of the gear and the benchmark for determining the correctness of the finishing.
Źródło:: Journal of KONES; 2013, 20, 2; 83-90
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: The influence of contour number on load carrying capacity of gears in aircraft gearbox demonstrator made by MEM
Autorzy:: Budzik, G.
Kozik, B
Łączek, A.
Cieplak, M
Powiązania:: https://bibliotekanauki.pl/articles/950153.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: test stand
Rapid Prototyping (RP)
aircraft gearbox
gears
Opis:: The paper presents an outcome of load carrying tests of gears in an aircraft gearbox demonstrator made of ABS B601polymer by means of INSPIRE D290 device. These tests checked an influence of an additional number of contours in gear models on durability of cooperating wheel pair during stand tests. The CAD models of the gears for stand tests were made in Autodesk Inventor program and were used as a base for making physical models. Therefore, Inventor files were exported to STL format. The following stage of data preparation was made in Model Wizard. The gears for stand tests were made by means of MEM method on INSPIRE D290 printer. Unlike most devices, this printer makes it possible to control not only the density of the filling in a model, but also to increase the number of contours. ABS polymer was chosen to make the gears. The choice was due to its good properties and because it is commonly used and also because it was possible to make the parts of the gearing at the Rzeszow University of Technology. Subsequently the gear pair was fixed on a test stand. The stand was designed in an open system. It was powered by a three-phase 0.75 kW electric motor. The control was provided by a single-phase inverter. Load on the stand was provided by an electromagnetic powder brake. This paper is a part of implementation of the research task number 4 „Development of a new, simpler and cheaper toothed gear in place of complicated and expensive planetary gears” of the project „Modern material technologies in aerospace industry."
Źródło:: Journal of KONES; 2014, 21, 3; 29-34
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Methodology of measurement aeronautical bevel gears using an optical scanner ATOS II Triple Scan
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Sobolewski, B.
Zaborniak, M.
Powiązania:: https://bibliotekanauki.pl/articles/247458.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: bevel gear
aircraft gearbox
optical scanner
coordinates measuring technique
Opis:: Properly prepared and carried out the measurement process of bevel gears determines its accuracy and productivity. This also has an influence on the final accuracy of bevel gears and the production costs of aeronautical gearbox. In the process of assessing the accuracy of manufacturing, majority of manufacturers of bevel gears use specialized contact coordinate measuring machines. The application of such machines as well as specialized programs dedicated to measuring the geometry of bevel gears are authoritative but in turns this requires substantial financial resources for the purchase of machinery. Thereby, this causes the limitation only of the gear assortment. Therefore, this article depicts different perspective on measurements of bevel gears using a universal measuring device, which is an optical 3D scanner ATOSII Triple Scan. Due to the use of the optical scanner ATOS II Triple Scan in measurement process, it was necessary to develop a methodology dealing with the process of assessing and accuracy, in order to achieve the desired results of measurement. This need arises from the fact that the optical scanner ATOS is not dedicated, specialized device for measuring gears. Despite of this fact, maintaining the appropriate measurement procedures and a proper preparation of the measured model allows for rapid and accurate assessment of the accuracy ofproduction. The article presents the analysis of conditions and developed rules concerning the preparation of a model for measurement. It also contains hints and a description of the measurement process. Furthermore, it depicts the rules specifying the interpretation of measurement results as well as the technical rules of their realization.
Źródło:: Journal of KONES; 2014, 21, 2; 201-208
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The determination of accuracy of the demonstrator of aeronautic bevel gearbox, accomplished by selected rapid prototyping techniques using an optical scanner Atos II Triple Scan
Autorzy:: Marciniec, A.
Budzik, G.
Dziubek, T.
Sobolewski, B.
Zaborniak, M.
Powiązania:: https://bibliotekanauki.pl/articles/247540.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: bevel gear
aircraft gearbox
optical scanner
coordinate measuring technique
rapid prototyping
gear modelling
Opis:: Designing and manufacturing of aeronautic bevel gearboxes is a complicated and time-consuming process because of complex kinematics of the machining process as well as numbers of manufacturing methods. Machine manufacturers usually provide algorithms used in manufacture process. This requires substantial financial resources and, in consequence, it increases the costs of production. Using other commonly available calculation algorithm requires a lot of studies to verify whether the proposed gearbox works correctly. In order to reduce the manufacturing costs of prototypes, it is possible to use Rapid Prototyping methods. Using both Rapid Prototyping techniques and coordinate optical measurements enables to verify the correctness of assumptions made in the initial stage of product designing. This approach reduces significantly both prototyping time and manufacturing costs. In order to ensure the effectiveness of prototyping process, it is essential to provide the accuracy of manufactured prototypes. That is the reason why it is necessary to determine manufacturing methods that will ensure the highest geometric accuracy. The study presents the modelling and manufacturing process of aeronautic bevel gear of demonstrator taking into consideration the accuracy of selected Rapid Prototyping methods. The gear modelling is based on machining simulation method conducted in Autodesk Inventor. The measurement results are shown in displacement maps obtained with an optical scanner Atos II Triple Scan and universal GOM Inspect Professional software, which determines the prototype accuracy in relation to 3D-CAD models.
Źródło:: Journal of KONES; 2014, 21, 3; 205-209
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Budzik, G." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język