Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "VOD" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
OPTIMEX: Measurement of Detonation Velocity with a Passive Optical Fibre System
Autorzy:
Pachmáň, J.
Künzel, M.
Kubát, K.
Šelešovský, J.
Maršálek, R.
Pospíšil, M.
Kubíček, M.
Prokeš, A.
Powiązania:
https://bibliotekanauki.pl/articles/358710.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
velocity of detonation
VOD
optical fibre
passive VOD measurement
OPTIMEX
Opis:
Detonation velocity (VOD) is one of the most important parameters describing the detonation process of a particular explosive. This article summarizes some peculiarities that we have come across when building and testing our new passive optical VOD meter – OPTIMEX. The advantages of using multiple probes with independent signal recording is discussed. The practical issues related to an explosive’s translucency are solved. Finally, a new method for detonation velocity data evaluation is proposed and demonstrated.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 1; 233-250
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Time on the Density and Detonation Velocity of Bulk Emulsion Explosives – a Case Study from Polish Copper Mines
Autorzy:
Mertuszka, Piotr
Fuławka, Krzysztof
Pytlik, Mateusz
Wincenciak, Jarosław
Wawryszewicz, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/358802.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
blasting
emulsion explosives
VOD
density measurements
chemical gassing
Opis:
The basic method for emulsion matrix sensitisation is chemical reduction of the density by producing in situ gas bubbles. The mixing of the components takes place directly inside the loading hose, which is equipped with a mixing device. Due to the multi-component nature of the mixture, the precise dosing of individual components has a key influence on the detonation behaviour of the final product. Unfortunately, keeping the mixing and charging of UG mobile units in good working condition in underground mines is a considerable challenge. As a result, completely different detonation parameters may be observed when charging the same explosive into blast holes using two different units. The aim of the present study was to determine the behaviour of the mechanically loaded emulsion explosives used in Polish underground copper mines by tracking the changes in the density and detonation velocity over time. Samples of the explosives were collected from selected mobile units. In addition, the influence of the quantity of the sensitising agent on the changes in the emulsion density and VOD was studied.
Źródło:
Central European Journal of Energetic Materials; 2019, 16, 2; 245-258
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oznaczanie prędkości detonacji wybranych idealnych materiałów wybuchowych przy użyciu metody ciągłej i odcinkowej
Determination of the Detonation Velocity of Selected Ideal Explosives by the Use of Continuous and Start-stop Methods
Autorzy:
Mertuszka, Piotr
Pytlik, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/1861225.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
materiały wybuchowe
prędkość detonacji
explosives
velocity of detonation
VOD
Opis:
W trakcie oznaczania prędkości detonacji górniczych materiałów wybuchowych przy użyciu urządzenia MicroTrap pojawiło się wiele wątpliwości dotyczących dokładności otrzymywanych wyników pomiarów ze względu na zastosowany materiał badawczy. W związku z powyższym przeprowadzono serię pomiarów prędkości detonacji idealnych materiałów wybuchowych (oktogen flegmatyzowany, heksogen flegmatyzowany, trotyl) przy użyciu Explometru Wielokanałowego oraz rejestratora MicroTrap. W trakcie badań, te same ładunki materiału wybuchowego i w tych samych warunkach zostały uzbrojone sondami do obu systemów pomiarowych. W ramach artykułu przedstawiono wyniki pomiarów prędkości detonacji idealnych materiałów wybuchowych przeprowadzonych metodą ciągłą i odcinkową (zwarciową).
During the measurements of the detonation velocity of mining explosives using the MicroTrap VOD/Data Recorder, many doubts arose regarding the accuracy of the results obtained. Consequently, a series of detonation velocity tests of ideal explosives (phlegmatized HMX, phlegmatized RDX, TNT) by the use of multi-channel Explomet and MicroTrap recorder were carried out. The same explosives under the same conditions were fitted with continuous and start-stop probes during the tests. The article presents the results of detonation velocity measurements of ideal explosives carried out by the use of continuous and start-stop methods (short-circuit).
Źródło:
Przegląd Górniczy; 2020, 76, 6; 8-14
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on FOX-7 Based Melt Cast High Explosive Formulations
Autorzy:
Mishra, V. S.
Vadali, S. R.
Garg, R. K.
Joshi, V. S.
Wasnik, R. D.
Asthana, S.
Powiązania:
https://bibliotekanauki.pl/articles/358915.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
melt cast
FOX-7
LOVEX
shock sensitivity
VOD
impulse
IMs
Opis:
The key driving force in modern explosive research is the development of low vulnerable high explosive (LOVEX) compositions for future applications in insensitive munitions (IMs). The increasing demand for LOVEX has led to exhaustive studies on low vulnerable explosives as a replacement for conventional cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX) in 2,4,6-trinitrotoluene (TNT) melt cast high explosive formulations. In the present study, 1,1-diamino-2,2dinitroethene (FOX-7) has been evaluated as a possible RDX replacement in TNT based, non-aluminized as well as aluminized, melt cast formulation. FOX-7 based melt cast formulations were characterized for their sensitivity to mechanical/shock stimuli, velocity of detonation (VOD), blast parameters and thermal decomposition behavior. These characteristics are compared with the corresponding RDX based compositions as reference standard. The studies show that with little sacrifice on performance parameters, FOX-7 based, non-aluminized and aluminized, melt cast formulations are found to be less vulnerable, compared with the corresponding RDX based formulations.
Źródło:
Central European Journal of Energetic Materials; 2013, 10, 4; 569-580
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on NTO-, FOX-7- and DNAN-based Melt Cast Formulations
Autorzy:
Mishra, V. S.
Vadali, S. R.
Bhagat, A. L.
Garg, R. K.
Kugaonkar, V. M.
Raman, S.
Sinha, R. K.
Asthana, S.
Powiązania:
https://bibliotekanauki.pl/articles/358500.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
melt cast
DNAN
TNT
FOX-7
NTO
RDX/TNT
VOD
sensitivity
Opis:
In the present paper, 2,4-dinitroanisole (DNAN) has been evaluated as a melt cast explosive in comparison to the widely used 2,4,6-trinitrotoluene (TNT). The detonation failure diameter of a bare DNAN charge is greater than 100 mm and about 44 mm with 1.5 mm steel confinement. Comparative studies of two sets of formulations were carried out. The first set comprised formulations containing 60% of NTO, FOX-7, HMX or RDX and 40% of DNAN or TNT. The second set comprised formulations containing 30% of NTO, FOX-7, TATB or RDX and 70% of DNAN or TNT. The studies were mainly concentrated on characterization of the formulations, which included determination of the sensitivity parameters and the velocity of detonation (VOD). The study confirmed that DNAN and DNAN-based formulations are relatively insensitive compared to TNT and the analogous TNT-based formulations respectively. The rate of the detonation reaction of DNAN is enhanced in the presence of the high energy ingredients RDX, HMX, FOX-7 and NTO to varying degrees. The VODs of the FOX-7/TNT and RDX/TNT formulations match closely with the proportions of FOX-7 and RDX under study. The VOD and shock sensitivity of the FOX-7/DNAN formulations decrease rapidly compared to the RDX/DNAN formulations, with increases in the proportion of FOX-7 or RDX. The combinations of NTO with TNT, and NTO with DNAN, are more shock insensitive than TNT or DNAN alone. NTO-based compositions are more insensitive than FOX-7-based compositions.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 403-417
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Field investigation in the detonation behavior of emulsion explosive column induced with air gaps
Autorzy:
Balakrishnan, Vineeth
Pradhan, Manoj
Dhekne, P. Y.
Powiązania:
https://bibliotekanauki.pl/articles/972340.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
velocity of detonation
VOD
site mixed emulsion
SME
distributed spherical air gap
DAG
blasting
Opis:
In blasting of soft to medium hard rock, the problem of high density resulting in excessive utilization of emulsion explosive is well known. The authors have conducted some experimental blasts to delve into the detonation behavior of conventional blasting and various other explosive consumption reduction techniques which induce air gaps using plastic tubes, plastic bottles or plastic balls in the explosive column. Resistance wire technique is used for gauging in-hole continuous velocity of detonation. The VOD varies from 5321.6 m/s to 4544.2 m/s and from 5123.4 m/s to 4274.2 m/s in conventional site mixed emulsion column and distributed spherical air gap column respectively. The detonation behavior is stable and similar in both these cases. While using plastic bottles or plastic tubes as air gaps, the VOD is fluctuating from 4636.3 m/s to 3268.4 m/s and from 4935.9 m/s to 3362.8 m/s respectively with a collapse of about 12 % from the average VOD of conventional SME column. The VOD falls abruptly when the detonation wave encounters large air gaps but it is successfully travelling through the air gaps making the detonation behavior more capricious.
Źródło:
Mining Science; 2019, 26; 55-68
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowe formy dystrybucji polskich filmów fabularnych
New ways of Polish feature film distribution
Autorzy:
Kucia, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/1289219.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Warszawski. Wydział Dziennikarstwa, Informacji i Bibliologii
Tematy:
VOD
dystrybucja
film
nowe media
monetyzacja filmów
piractwo
distribution
new media
film monetisation
piracy
Opis:
Pojawienie się nowych kanałów udostępniania treści audiowizualnych w internecie wiąże się z przeobrażaniem tradycyjnego modelu dystrybucji filmowej. W artykule przedstawiono przegląd dostępnych w Polsce serwisów VOD (stan na kwiecień 2016) oraz zaprezentowano główne trudności związane z monetyzacją polskich filmów w sieci przez właścicieli praw autorskich w kontekście europejskich i globalnych tendencji rynkowych.
The emergence of new internet channels distributing audio-visual content has transformed traditional models of film distribution. This article presents an overview of internet-based VOD services in Poland (as per April 2016) as well as outlining the main issues for Polish fi lm Copyright holders in their attempts to monetise products via the World Wide Web within the wider context of European and global market trends.
Źródło:
Studia Medioznawcze; 2016, 3 (66); 109-118
2451-1617
Pojawia się w:
Studia Medioznawcze
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies