Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "sodium alginate" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Calcium alginate/activated carbon/humic acid tri-system porous fi bers for removing tetracycline from aqueous solution
Autorzy:
Sun, Qinye
Zheng, Heng
Li, Yanhui
Li, Meixiu
Du, Qiuju
Wang, Cuiping
Sui, Kunyan
Li, Hongliang
Xia, Yanzhi
Powiązania:
https://bibliotekanauki.pl/articles/949364.pdf
Data publikacji:
2020
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Sodium alginate
Humic acid
Activated carbon
Adsorption
Tetracycline
Opis:
In this study, activated carbon and humic acid powder were fixed by the cross-linking reaction of sodium alginate. Calcium alginate/activated carbon/humic acid (CAH) tri-system porous fibers were prepared by the wet spinning method and freeze-dried for the removal of tetracycline in aqueous solution. Subsequently, the morphology and structure of CAH fibers were measured by scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effect of pH, contact time, temperature and other factors on adsorption behavior were analyzed. The Langmuir and Freundlich isotherm models were used to fit tetracycline adsorption equilibrium data. The dynamics data were evaluated by the pseudo-second-order model, the pseudo-second-order model and the intraparticle diffusion model. Thermodynamic study confirmed that the adsorption of tetracycline on CAH fibers was a spontaneous process.
Źródło:
Polish Journal of Chemical Technology; 2020, 22, 3; 9-16
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of a novel depressant on the separation of talc and copper –nickel sulfide ore
Autorzy:
Gu, Guohua
Chen, Zhixiang
Zhao, Kaile
Song, Siyu
Li, Shuangke
Wang, Chongqing
Powiązania:
https://bibliotekanauki.pl/articles/110492.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Sodium alginate
talc
copper–nickel sulfide
polysaccharide depressant
flotation
Opis:
This paper researched the influence of the polysaccharide polymer sodium alginate (SAG) on the depression of talc at a fixed room temperature about 25 °C through micro flotation and batch flotation experiments, zeta potential and contact angle measurements as well as infrared spectroscopy analysis. The flotation results displayed that the SAG had a significant influence on the flotation of talc but less influence on sulphide flotation. Compared with the depressant carboxymethyl cellulose (CMC) and guar gum, using of the SAG gave the highest copper recovery. It could not only eliminate a talc removal step, but also significantly decrease in the depressant consumption by half at least. Sodium alginate apparently adsorbs on the talc surface and promotes hydrophilization, as revealed by contact angle tests (contact angle decreased from 75 to 33° after treating with SAG). It is demonstrated that the SAG obviously absorbed at the surface of talc but rarely for chalcopyrite through the results of zeta potential measurements and infrared spectroscopy analysis.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 1; 116-127
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Electrically Conductive Nanocrystalline Thin Film for Optoelectronic Applications
Autorzy:
Das, S K.
Islam, J. M. M.
Hasan, M.
Kabir, H.
Gafur, Md. A.
Hoque, E.
Khan, M. A.
Powiązania:
https://bibliotekanauki.pl/articles/412543.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Conductive thin film
Composite
TiO2
Solar cell
Optoelectronics
Sodium alginate
Opis:
Sodium alginate (TiO2) sand composites were prepared by solution casting. Purified sand was added in the composite films to increase electrical conductivity. Electrical properties such as conductivity, capacitance, dielectric constant, and loss tangent of the composites were investigated. The current voltage characteristics for all the composites showed ohmic behavior. All the electrical properties have been found to improve with the incorporation of sand (SiO2) but 6 % sand containing composite exhibits the best electrical properties. The mechanical properties tensile strength (TS), elongation at break (Eb) and Young modulus for 6 % sand containing composite film are found to be 4.445 MPa, 9.76 %, and 72.8 MPa respectively. The experimental results reveal that the blended films exhibit higher stability and improved mechanical properties of both tensile strength and elongation at break in dry state. Water absorption properties of the composites are found to decrease with the increase of sand content. Lowest water uptake properties and highest stability were demonstrated by 6 % sand containing sample. Electrically conductive composite films have useful applications for solar cells and optoelectronics. Thus, this study is very much expected to aid in the design and selection of proper composite for the potential application of solar cell and optoelectronics.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 10, 1; 90-101
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies