Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "system emisji" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
Assessment of vehicle emissions at roundabouts: a comparative study of PEMS data and microscale emission model
Autorzy:
Madziel, Maksymilian
Campisi, Tiziana
Powiązania:
https://bibliotekanauki.pl/articles/2173936.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
vehicle emissions
roundabouts
emission modeling
Portable Emission Measurement System
PEMS
transport system
private transport
emisja zanieczyszczeń
rondo
badania emisji zanieczyszczeń
system transportowy
transport prywatny
Opis:
Energy efficiency has a central role to play in achieving decarbonisation targets in the transport system by changing the demand for mobility (eg. by influencing on peoples behaviors) and improving the performance of the fleet. In recent years there has been an increase of use of private transport, partly due to the recent pandemic and the reduced choice of public transport. People's travel habits have changed in frequency and motivation due to the reduced number of seats on public transport, due to social distancing but also due to online education and teleworking. This increase of use private cars has led to an increase in environmental emissions as a result of the high proportion of vehicles with combustion engines in urban areas. The highest concentrations have been recorded at road intersections and in particular at roundabout configurations where there is a higher number of stop-and-go's overall. The increasing importance of air pollution from vehicle traffic has suggested that environmental considerations should be added to these aspects as a criterion for intersection design. Several studies in the literature analyze the environmental emissions generated by vehicle traffic using different methods such as on-site recording, mathematical modeling of dispersion phenomena, micro-simulation of vehicle traffic, use of appropriately equipped vehicles with sensors. This paper presents a comparison between the results obtained from the Portable Emission Measurement System (PEMS) and the results obtained from the VERSIT+ emission model. Specifically, using a Portable Emission Measurement Systems (PEMS) installed on a series of test cars, instantaneous CO2 and NOX emissions were measured on repeated trips along two-lane roundabout intersections. The study was carried out by examining a selected two-lane roundabout in the city of Rzeszow (Poland) using 9 different vehicles fueled by petrol, diesel, and LPG. The results show that the investigated VERSIT+ emission model used led to an inaccuracies in the calculation of CO2 and NOx emissions. Furthermore, current micro-scale emission models may not estimate emissions of harmful exhaust components with sufficient accuracy due to the specificities of roundabout driving. Therefore, there is a strong demand for the development of new emission models, adapted to the driving behavior of drivers appropriate for different infrastructure objects such as roundabouts
Źródło:
Archives of Transport; 2022, 63, 3; 35--51
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method of verifying the emission level of the exhaust components of a special vehicle in relation to EURO III standard in road conditions
Autorzy:
Kaźmierczak, Andrzej R.
Matla, Jędrzej
Powiązania:
https://bibliotekanauki.pl/articles/2097637.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
emissions verification method
portable emission measurement system
PEMS
special vehicle
real driving emissions
RDE
exhaust components
weryfikacja emisji
przenośne systemy pomiaru emisji
pojazd specjalny
rzeczywista emisja cząstek
składniki spalin
Opis:
The following article presents the method of verification of EURO III standard in real conditions for special vehicles. The test object qualified as a special vehicle was tested in road conditions along a defined route, and then the obtained measurement results were compared to the exhaust emission standard (EURO III) applicable for this vehicle. A method of comparing the emission factors in road conditions with the indicators obtained on the engine dynamometer was proposed. An AVL mobile exhaust gas analyzers PEMS dedicated for RDE road tests were used in the research.
Źródło:
Combustion Engines; 2022, 61, 2; 89--93
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of emissions and fuel consumption from forklifts by location of operation
Autorzy:
Ziółkowski, Andrzej
Fuć, Paweł
Jagielski, Aleks
Bednarek, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/2097652.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
forklifts
portable emission measurement system
PEMS
exhaust emission
fuel consumption
wózki widłowe
przenośne systemy pomiaru emisji
emisja spalin
zużycie paliwa
Opis:
The share of road transport accounts for more than 85% of the total structure of freight transportation. In this process, mainly motor vehicles are used to carry out the freight work. In addition to them, forklifts are also used, whose task is to load and unload goods. These vehicles are categorized as NRMM (Non-Road Mobile Machinery). Forklift trucks have internal combustion or electric drive. The paper presents an analysis of the emission of pollutants and fuel consumption from forklift trucks equipped with diesel and LPG power. The study uses the author's test taking into account the raising/lowering of a pallet, a loaded and unloaded run. The measurements were made in the warehouse and outside the warehouse using the Portable Emission Measurement System (PEMS) equipment. The aim was to show the influence of loading conditions on the emission of pollutants and fuel consumption.
Źródło:
Combustion Engines; 2022, 61, 2; 30--35
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Particle number measurements in the European legislation and future JRC activities
Autorzy:
Giechaskiel, B.
Lahde, T.
Suarez-Bertoa, R.
Clairotte, M.
Grigoratos, T.
Zardini, A.
Perujo, A.
Martini, G.
Powiązania:
https://bibliotekanauki.pl/articles/133557.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
vehicle emissions regulation
particle measurement programme
PMP
portable emission measurement system
PEMS
real driving emissions
RDE
periodical technical inspection
particle number
sub-23 nm
regulacja emisji spalin
program pomiaru cząstek
przenośne systemy pomiaru emisji
okresowa kontrola techniczna
liczba cząstek
rzeczywista emisja cząstek
Opis:
The solid particle number method was introduced in the European Union (EU) light-duty legislation for diesel vehicles to ensure the installation of the best-available technology for particles (i.e., wall-flow diesel particulate filters) without the uncertainties of the volatile nucleation mode and without the need of large investment for purchasing the equipment. Later it was extended to gasoline vehicles with direct injection engines, heavy-duty engines (both compression ignition and positive ignitions) and non-road mobile machinery engines. Real Driving Emissions (RDE) testing on the road with Portable Emissions Measurement Systems (PEMS) for particle number (and NOx) during type approval and in-service conformity testing was recently (in 2017) introduced for light-duty vehicles, and is under discussion for heavy-duty vehicles in-service conformity testing. This paper will summarize the existing legislation regarding solid particle number and discuss the on-going activities at EU level. The main focus at the moment is on improving the calibration procedures, and extending the lower detection size below 23 nm with interlaboratory exercises. In parallel, discussions are on-going to introduce testing at low ambient temperature, regeneration emissions in the light-duty regulation, a particle limit for other technologies such as gasoline port-fuel injection vehicles, and the feasibility of particle measurements to L-category vehicles (mopeds, motorcycles, tricycles and minicars). A short overview of periodical technical inspection investigations and the situation regarding non-exhaust traffic related sources with special focus on brakes and tyres will be described.
Źródło:
Combustion Engines; 2018, 57, 3; 3-16
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determining the environmental indicators for vehicles of different categories in relation to CO2 emission based on road tests
Autorzy:
Merkisz, J.
Rymaniak, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/132884.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
CO2 emission
combustion engines
portable emission measurement system
PEMS
real driving emissions
RDE
toxicity indicators
emisja dwutlenku węgla
silnik spalinowy
przenośne systemy pomiaru emisji
rzeczywista emisja cząstek
wskaźniki toksyczności
Opis:
The article discusses the possibility of determining the environmental indicators for vehicles of different categories in relation to CO2 emissions. These are called toxicity indicators because they concern the compounds: CO, THC and NOx. Three Euro V compliant vehicles with different propulsion systems types were used for the study: a 0.9 dm3 urban passenger car with a SI engine and a start-stop system, a 2.5 dm3 off-road vehicle with a CI engine, and a city bus with a hybrid drive system in series configuration and a CI engine with a displacement of 6.7 dm3. Measurements were made in actual operating conditions in the Poznan agglomeration using a portable emissions measurement system (PEMS). The paper presents the characteristics of the operating time shares of vehicles and propulsion systems as well as CO2 emissions depending on the engine load and crankshaft rotational speed for individual vehicles. The determined toxicity indicators allowed to indicate their usefulness, to make comparisons between tested vehicles, and to identify directions for further work on the application and interpretation of these indicators.
Źródło:
Combustion Engines; 2017, 56, 3; 66-72
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of rail vehicles exhaust emissions
Autorzy:
Kamińska, Michalina
Kołodziejek, Daniel
Szymlet, Natalia
Fuć, Paweł
Grzeszczyk, Rafał
Powiązania:
https://bibliotekanauki.pl/articles/2097647.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
rail vehicles
real driving emissions
RDE
portable emission measurement system
PEMS
non-road mobile machinery
NRMM
emisja spalin
pojazdy szynowe
rzeczywista emisja cząstek
przenośne systemy pomiaru emisji
pozadrogowe maszyny ruchome
Opis:
The basic problem in terms of measuring exhaust emissions is the approval tests of traction vehicles, which are carried out on engine dynamometers. Therefore, it is impossible to obtain reliable results concerning their actual impact on the natural environment. It is therefore advisable to carry out the tests in real operation conditions, as is the case for road vehicles for which RDE (Real Driving Emissions) tests are carried out. The latest Stage V emission standards push for the introduction of this type of test, but no limit values for toxic exhaust gases have been established and no test guidelines have been defined for assessing actual emissions. This article describes the issues related to the legislative guidelines for non-road vehicles in force in Europe, as well as the measurement tools used, such as mobile equipment for measuring emissions of PEMS (Portable Emissions Measurement Systems) and newly developed emission gates. Additionally, the paper presents examples of locomotive exhaust emission tests in real operating conditions. The aim of the measurements was to assess the emission of toxic compounds against the relevant standards. The subject of the research was a diesel locomotive type T448.P equipped with a modernized internal combustion engine.
Źródło:
Combustion Engines; 2022, 61, 2; 10--17
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of two condensation particle counters (CPCs) in photometric mode for high concentration exhaust emission measurements
Autorzy:
Giechaskiel, Barouch
Melas, Anastasios
Mamakos, Athanasios
Powiązania:
https://bibliotekanauki.pl/articles/24202487.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
PEMS
PTI
CPC
PNC
portable emission measurement system
periodic technical inspection
condensation particle counter
particle number counter
single counting mode
photometric mode
przenośne systemy pomiaru emisji
okresowe badania techniczne
kondensacyjny analizator cząstek stałych
licznik cząstek stałych
tryb pojedynczego zliczania
tryb fotometryczny
Opis:
Condensation particle counters (CPCs) use light scattering to count particles after they have grown to micron size in a supersaturated environment. In single counting mode each particle is counted depending on whether the scattered light exceeds a threshold value or not. In photometric mode the total scattered light is converted in particle number concentration. While for laboratory grade particle number systems, CPCs are allowed to operate only in single counting mode, there is no such requirements for portable emissions measurements systems (PEMS) for real-driving emissions (RDE) testing or for instruments for periodic technical inspection (PTI) of vehicles. In this study two CPCs of the same model were assessed in single counting and photometric modes with silver and graphite particles with sizes ranging from 10 nm to 100 nm. The results showed that the concentration was measured accurately enough for particles in the 25 nm to 50 nm size range, but was underestimated and overestimated for smaller and larger particles, respectively. The key message is that the photometric mode should be avoided or calibrated in function of concentration and particle size.
Źródło:
Combustion Engines; 2023, 62, 2; 15--23
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies