Autor: Krason, J. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Dynamics analysis of the main landing gear in 3D model
Analiza dynamiczna podwozia głównego w modelu 3D
Autorzy:: Krasoń, W.
Małachowski, J.
Powiązania:: https://bibliotekanauki.pl/articles/247885.pdf
Data publikacji:: 2007
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: podwozie samolotowe
modelowanie numeryczne
zrzutowy test lądowania
MES (metoda elementów skończonych)
aircraft landing gear
numerical modelling
touchdown drop test
FEM
Opis:: Właściwie dobrane charakterystyki podwozia pozwalają minimalizować obciążenia występujące w podzespołach układu podwozia podczas jego pracy w momencie przyziemienia. W związku z tym wykonuje się analizy dynamiczne podwozi, aby przewidzieć ich zachowanie się w warunkach dla nich niebezpiecznych. Przeprowadzenie tego typu badań z wykorzystaniem metod numerycznych jest znacznie łatwiejsze i tańsze od prób stanowiskowych. W pracy omawiana jest metodyka modelowania podwozia głównego i procedury doboru parametrów opisujących rzeczywistą strukturę badanego układu. W celu określenia właściwości materiałowych elementów składowych układu podwozia definiowane są sprężyste i nieliniowe charakterystyki materiałowe. W modelu numerycznym MES uwzględniono następujące zagadnienia: kontakt pomiędzy współpracującymi częściami układu, zjawisko pochłaniania energii w amortyzatorze gazowo-cieczowym zastosowanym w podwoziu, oddziaływanie gruntu na odkształcalną oponę podczas przyziemienia. Wybrane wyniki analizy numerycznej odpowiadające przypadkowi maksymalnych obciążeń podwozia podczas przyziemienia na 3 punkty z maksymalną dopuszczalną prędkością pionową będą omawiane wraz z wynikami testów stanowiskowych. Prezentowana w pracy analiza jest pierwszą częścią badań numerycznych trwałości podwozia lotniczego.
Properly adjusted characteristics enable minimisation of loads that occur in the landing-gear components at the moment of touchdown. Therefore, dynamic analyses of the landing gear are conducted to provide capabilities to forecast their behaviour under hazardous conditions. This kind of investigation with numerical methods applied is much easier and less expensive than stand tests. However, the development of the landing gear FEM models is necessary. Methodology of the main landing gear numerical models developing and procedures of parameters selection for the real structure features representation is discussed in the paper. The nonlinear physical material properties were precisely defined. To describe material properties of all mechanical components of the landing gear, a materials chart describing parameters for the elastic range was used. In FEM model the following matters were taken into consideration: contact problems between collaborating elements, the phenomena of energy absorption by gas-liquid damper placed in the landing gear and the response of the landing gear during touchdown of a flexible wheel with the ground. Chosen results of the numerical analysis for the maximum load of the gear considered, corresponding to an aircraft's 3-point landing at maximum decline speed allowed have been compared to experimental research's results. The analysis presented in this paper is the first part of wider considerations concerning numerical assessment of landing gear life.
Źródło:: Journal of KONES; 2007, 14, 3; 305-310
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Experimental verification of numerical test results for a double multi- leaf spring
Autorzy:: Krasoń, W.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/242087.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: experimental verification
FEM
numerical models
double multi-leaf spring
suspension of a motor truck
Opis:: A double spring used in the vehicle suspension, as a combination of spring elements of characteristics close to linear ones, actually provides non-linear suspension characteristics. Due to requirements for the truck suspension being designed, the spring characteristics in the whole range of load changes should meet the vehicle motion smoothness related to keeping the frequency of own suspension vibrations within a range of l-2 Hz [8, l0]. A prototype double spring made of a four-leaf main spring and two- leaf auxiliary spring (Fig. 1) makes a subject of considerations. Characteristic features of that structural solution includes a clearance between the main spring and the auxiliary spring. This work presents the results of numerical tests for three models of MES double spring [23] that were compared with experimental test results. An evaluation of usability of individual numerical models was made for representation of a double spring characteristics, contact between individual leaves and regular stress in the main leaf (the so-called safety leaf). The smallest differences between the stress results obtained from numerical tests compared to the laboratory tests, for the beam and shell models, have been obtained only for one extreme main (longest) leaf.
Źródło:: Journal of KONES; 2009, 16, 3; 185-193
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Analysis of vibrations of the simplified model of the suspension system with a double spring and a fluid damper
Autorzy:: Krasoń, W.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/244562.pdf
Data publikacji:: 2011
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: FEM
numerical models
double multi-leaf spring
suspension of a motor truck
viscous damper
Opis:: The subject of the paper are forced vibrations of the rear suspension of the biaxial vehicle fitted with the double spring spatial shell model and the viscous damper, under the force pulse input with the given transient response. The play between the master and auxiliary spring is a specific feature of the double spring design [1, 6]. Numerical tests were taken for three variants of the viscous attenuation. The attenuation coefficient values for typical dependent suspensions and their range of changes were assumed on the basis of publication [14]. The problem of modelling and analysing, including contact issues, was solved with the use of the MSC Software programme package with the special use of MSC Patran pre-processor [12]. The numerical analysis of the suspension model with the geometrical nonlinearities, viscous attenuation, and time-varying load was taken with the use of the finite element method (FEM). The selected results of the model tests in the form of the suspension relative displacements (speeds) and deformations (stresses) for the selected points of the master and auxiliary spring against time are presented in the paper. The complete model of the suspension system makes possible to examine the influence of various inputs on the interoperation and the phenomena associated with the dynamic response of such a complex system.
Źródło:: Journal of KONES; 2011, 18, 1; 311-316
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: A numerical analysis of a double multi-leaf spring model
Autorzy:: Wysocki, J.
Krasoń, W.
Powiązania:: https://bibliotekanauki.pl/articles/245995.pdf
Data publikacji:: 2009
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: FEM
numerical models
double multi-leaf spring
suspension of a motor truck
Opis:: The use of a double spring in a vehicle suspension as a combination of elastic components of characteristics which are approximate to linear ones gives a nonlinear suspension nature, which should approximately meet the criterion of car motion smoothness connected with keeping the frequency of the free vibrations of the a motorcar body in the range of l - 2 Hz, in the whole range of load changes (cargo) [see references 8, 10]. The subject of considerations is a prototypical double spring that consists of a four-leaf main spring and a two-leaf auxiliary spring and is meant for the family of motor trucks (delivery trucks) of a total mass of about 3,51. The presence of a clearance between the main spring and the auxiliary spring is the specificity of the aforementioned structural solution. In the present study, there are presented different variants of FEM numericał models ofa double spring as well as selected aspects of their applications at the stage of the research on the displacements and deformations of selected structural components. The structures ofa two-dimensional beam model, a three-dimensional shell model and a solid model of a double spring are discussed. Moreover, the study discusses different approaches in the modelling of the effect of contact between particular leaves and their influence on analysis results. Selected model tests results were compared with experimental research results.
Źródło:: Journal of KONES; 2009, 16, 1; 541-550
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: The research on the double spring effort in braking process
Autorzy:: Krasoń, W.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/247773.pdf
Data publikacji:: 2010
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: FEM
numerical models
double multi-leaf spring
truck suspension
load in braking process
Opis:: A prototype double spring, consisting of the main four-leaf spring and the auxiliary two-leaf spring, designed for a truck (van) vehicles of a gross weight ofapp. 3,5 tons, makes the subject of considerations. This structural design is characterized by a clearance between the main and the auxiliary springs. The main objective of this work is to define the double spring strain during intense vehicle braking. A spatial FE shell double spring model has been proposed and it has been used for effort and deformation research on its selected elements, at combined load (vertical, horizontal forces and braking moment). Numerical tests have been performed within the quasistatic operation loads. The numerical analysis using those loads allows evaluating the braking force impact on the double spring operation and cooperation of the main and auxiliary spring leaves. Modelling and analysis issue, including contact issue, have been sohed by means of the software package for engineering computation by MSC. Software. Results obtained from simulations allow evaluating the deformation of individual leaves of the double spring, stress concentration areas and preliminary identification of the suspension (drive axle) kinematics, particularly to define axis trajectory of the wheel. Selected numerical test results have been compared to the experimental test results.
Źródło:: Journal of KONES; 2010, 17, 4; 237-244
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Numerical studies of suspension system with double spring loaded using the force pulse
Autorzy:: Krason, W.
Wysocki, J.
Powiązania:: https://bibliotekanauki.pl/articles/244918.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: dependent motor truck suspension
double multi-leaf spring
viscous damper
numerical analysis
FEM
zależne zawieszenie samochodu silnikowego
podwójna sprężyna wielopłatowa
lepka przepustnica
analiza numeryczna
MES
Opis:: The forced vibration of a dependent rear suspension model of the two-axle vehicle, equipped with a 3D model of a double spring and a viscous shock absorber is the subject of consideration. The clearance between the master and auxiliary springs is a specificity of the double suspension construction. Dynamic analysis of such a system has been performed by forcing with different forms of force pulses using the fixed base of force 10 kN. Three different time runs (two trapezoidal and one triangular model) are used as the force impulses. Modelling and analysis taking into consideration contact problems have been developed using the MSC.Software package with a special use of Patran pre-processor and Nastran solver. A finite element method (FEM) has been used in numerical analysis of the suspension model with geometric nonlinearities, viscous damping [9] and time-varying load. The boundary conditions of numerical models correspond to a spring support in the real vehicle suspension. The non-periodic damped vibrations and damped free vibrations of the simplified suspension system are investigated during numerical analysis. Selected results of the model tests have been presented in the form of the timings of the accelerations of the spring elements and of the forces in the suspension damper.
Źródło:: Journal of KONES; 2018, 25, 1; 241-248
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "Krason, J." wg kryterium: Autor

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język