Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "polymer fibre" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Electrical properties study of fibre reinforced polymeric materials used in aircraft structures
Autorzy:
Porras, S.
Mucha, M.
Powiązania:
https://bibliotekanauki.pl/articles/241579.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
composite materials
electrical conductivity
carbon fibre reinforced polymer
CFRP
glass fibre reinforced polymer
GFRP
aerospace materials
lightning strike protection
LSP
Opis:
Aircraft are exposed to lightning strikes. Lightning strike protection (LSP) devices involve additional weight of the aircraft. Therefore, multifunctional materials that allows the conductivity of electrical current and, simultaneously, holds the mechanical properties required to withstand the typical conditions for an aerospace material are widely researched. A typical resin used in aviation is an insulator, so main research is done to reduce its resistance. On the other hand, the type of reinforcement can have a large influence on the electrical conductivity in the plane of reinforcement. The aim of the article is to evaluate the effect of the type and the basis weight of reinforcement on the electrical conductivity. For this purpose, with the use of a hydraulic press, different four-layer composites based on epoxy resin were produced. Each differing is in combination of carbon, glass layers and their basis weight (from 48 kg/m2 to 245 kg/m2 ). The measuring proceedings were carried by an RMS multi meter and, more accurate, by an LCR meter with 4 selectable test frequencies. The measurements were made both along the strand fibres and at a 45-degree angle. The results made it possible to determine which reinforcement of aircraft composites should be selected at the aircraft design level to provide increased electrical conductivity along the reinforcement fibres and thus influence one of the factors affecting the protection of the aircraft against the effects of lightning
Źródło:
Journal of KONES; 2018, 25, 4; 347-353
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of abrasive wear of selected aircraft materials in various abrasion conditions
Autorzy:
Krzyżak, A.
Mucha, M.
Pindych, D.
Racinowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/242294.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
composite materials
tribology
carbon fibre reinforced polymer
CFRP
aerospace materials
Opis:
The use of composite materials is continuously increasing in modern transport. This process is especially noticeable in aviation. The mass percentage of epoxy resin composites in contemporary aircraft constructions is usually higher than 50%, and these materials must meet increasingly demanding requirements. In these circumstances, in addition to mass and strength, it is necessary to predict other properties of the material, such as abrasion resistance. The article presents the analysis of the process of abrasion of carbon fibre reinforced polymers reinforced with various fillers. Straight carbon fibre mats were used for the tests. In addition, powders of pumice, alumina, silicon carbide, and glass microspheres at various concentrations in relation to the matrix were used as fillers. In order to investigate the influence of external factors on the abrasion process, each group of samples was subjected to abrasion under different external conditions: in an insulated environment, in the presence of water and loose abrasives: brown fused alumina (BFA) and white fused alumina (WFA). The measurements were carried out using a precision balance and an electron microscope. The results allow concluding on which kind of filler and in what concentration contributes to improvement of the abrasion resistance of the composite material the most. In addition, it was found that the conditions in which abrasion occurs have a very large impact on the course of this process.
Źródło:
Journal of KONES; 2018, 25, 4; 217-222
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Studies of Tribological Properties of Carbon Fibre Reinforced Polymer Composites (CFRP) in Dry Sliding Friction Conditions
Badania porównawcze właściwości tribologicznych warstwowych kompozytów polimerowych wzmacnianych włóknami węglowymi (CFRP) w warunkach tarcia ślizgowego suchego
Autorzy:
Pieniak, Daniel
Gil, Leszek
Wit-Rusiecki, Albin Michał
Krzyżak, Aneta
Selech, Jarosław
Romek, Dawid
Powiązania:
https://bibliotekanauki.pl/articles/971372.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
kompozyty polimerowe wzmacniane włóknami węglowymi
CFRP
twardość indentacyjna
twardość uniwersalna
tarcie ślizgowe
zużycie
carbon fibre reinforced polymer
indentation hardness
universal hardness
sliding friction
wear
Opis:
Celem badań było określenie cech użytkowych i jakościowych oraz właściwości tribologicznych czterech nowo opracowanych przez autorów laminatów o osnowie polimerowej wzmacnianych włóknami węglowymi (CFRP – Carbon Fiber Reinforced Polymer) i wskazanie struktur o najkorzystniejszych właściwościach użytkowych. Opracowane próbki materiałów oparte były na dwóch typach prepregu: Kord Carbon (Fiberpreg GmbH) o splocie twill oraz włókien węglowych (UD) producenta (G. Angeloni S.R.L) o jednokierunkowym układzie. W strukturze połowy ogólnej liczby próbek zastosowano warstwę epoksydowego filmu klejowego (AF) producenta (NTPT). Wykonano badania twardości indentacyjnej (uniwersalnej) wg metody Olivera-Pharra. Badania odporności na zużycie ścierne prowadzono w warunkach tarcia ślizgowego suchego, metodą kula–tarcza. W skojarzeniu jako przeciwpróbkę wykorzystano kulkę wykonaną z tlenku glinu (Al2O3). Wyniki badań wskazują na istotny wpływ struktury badanych materiałów na wzrost wytrzymałości stykowej oraz polepszenie właściwości tribologicznych, które wynikają z zastosowania warstwy AF.
The aim of the study was to determine the usable and quality features and tribological properties of four Carbon Fibre Reinforced Polymer laminates (CFRP) newly developed by the authors and to indicate the structures with the most advantageous functional properties. The developed material samples were based on two types of prepreg, Kord Carbon (Fiberpreg GmbH) with twill weave and carbon fibres (UD) by the manufacturer (G. Angeloni S.R.L) with a unidirectional system. In the structure of half of the total number of samples, a manufacturer's (NTPT) epoxy adhesive film (AF) layer was used. Tests of indentation hardness (universal) were carried out according to the Oliver-Pharr method. Tests of resistance to abrasive wear were carried out in dry sliding friction conditions, using the ball-disc method. In combination, a ball made of aluminium oxide (Al2O3) was used as a cooperating element. The test results indicate a significant impact of the structure of the tested materials on the increase in contact strength and the improvement of the tribological properties that result from the application of the AF layer.
Źródło:
Tribologia; 2019, 286, 4; 87-94
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies