Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Pacek, A" wg kryterium: Autor


Wyświetlanie 1-3 z 3
Tytuł:
Numerical Simulations of Penetration of 9 mm Parabellum Bullet into Kevlar Layers : Erosion Selection in Autodyn Program
Autorzy:
Wiśniewski, A.
Pacek, D.
Powiązania:
https://bibliotekanauki.pl/articles/403498.pdf
Data publikacji:
2011
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
numerical simulations
AUTODYN
SPH method
Lagrange method
kevlar
9 mm Parabellum bullet
erosion in simulation
Opis:
A numerical model was performed of penetration of 9 mm Parabellum bullet into Kevlar layers, with the use of the AUTODYN software program. Simulations were conducted with a bullet modelled by means of the Smooth Particle Hydrodynamicsmethod (SPH) and with an armour coded by a Lagrange grid. The simulations were performed for 20 layers of Kevlar (one layer: thickness - 0.3 mm, surface density - 220 g/cm²) and for impact velocity of 350 m/s. The comparison included the mean velocity of the bullet (which takes into account the velocities of particles that separated from the part of the bullet penetrating the armour) and the velocities at gauge points established near the axis of symmetry of the bullet. The gauge point representative for velocity of the bullet was indicated. With regard to excessively large deformations of the grid, that caused interruption of the initial simulation, the criteria of erosion (cells removal) were introduced. From effective strains available in the AUTODYN software, the effective instantaneous geometric strain was selected. Influence of the erosion strain (value of strain for which cells are removed) onto the mass of removed cells and the residual velocity of the bullet were investigated. Simulations with neglect and respect to mass of removed cells in further calculations were performed. The erosion criteria for which further simulations should be conducted were indicated.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2011, 2, 3 (5); 11-20
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research and numerical analysis of penetration of the twaron T750 aramid fabric with the 9 mm Parabellum projectile
Autorzy:
Wiśniewski, A.
Pacek, D.
Powiązania:
https://bibliotekanauki.pl/articles/403693.pdf
Data publikacji:
2013
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
mechanics
numerical simulations
aramid woven fabric
AUTODYN
Opis:
The paper presents results of experimental research and numerical analysis of the penetration process of the Twaron T750 aramid fabric with the 9 mm Parabellum projectile (brass jacket, lead core). Numerical simulations of the 9 mm Parabellum projectile impact into 10 and 16 layers of the Twaron T750 fabric with the use of the Ansys Autodyn v13 program for dynamic analyses were conducted on the basis of 3-dimensional solid numerical models. As a boundary condition in the experiment and in the numerical simulations it was assumed that all the four edges of the fabric were fixed. In the numerical simulations the sample of 50 ×50 mm dimensions and the impact velocities Vi = 448 m/s for 16 layers of the Twaron T750 fabric and Vi = 454 m/s for 10 layers of Twaron T750 fabric were adopted. In the paper the results of the numerical simulations for three material configurations with the same friction coefficients and for different values of yarn-yarn friction in case of one material configuration are presented. Residual velocity of the penetrator for the highest friction coefficient μs = 1 decreased of 13.1% in comparison to simulation with no friction (μs = 0).
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2013, 4, 3 (13); 7-22
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research and numerical analysis of 9 mm Parabellum projectile penetration of ultra-high molecular weight polyethylene layers
Badania eksperymentalne i analiza numeryczna penetracji 9 mm pociskiem Parabellum warstw polietylenowych o ultra-wysokiej masie cząsteczkowej
Autorzy:
Wiśniewski, A.
Pacek, D.
Powiązania:
https://bibliotekanauki.pl/articles/235372.pdf
Data publikacji:
2013
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
UHMWPE
numerical simulation
AUTODYN
symulacja numeryczna
Autodyn
Opis:
The paper presents results of experimental research and numerical analysis of the 9 mm Parabellum projectile (brass jacket, lead core) impact (impact velocity Vi = 365 m/s) into layers of the nonwoven polyethylene Dyneema®SB71 (100x100 mm) placed on the backing material. 3D numerical simulations with the use of the Ansys Autodyn v14 program were made. On the basis of the literature and own results of the weight drop test into ballistic plasticine (backface signature BFS = 18-24 mm) conforming to experimental tests numerical model of backing material was made. As a boundary condition in the numerical simulations of projectile impact into Dyneema®SB71 layers it was assumed loading of the tightening belt with 25 N force. In difference to experimental results in numerical simulations the front part of the jacket torn off and the core material flow outside the jacket and there were no perforated layers.
W artykule przedstawiono wyniki badań ostrzałem oraz analiz numerycznych uderzenia pocisku 9 mm Parabellum (płaszcz mosiężny, rdzeń. ołowiany, prędkość uderzenia Vi = 365 m/s) w warstwy nietkanego wyrobu polietylenowego Dyneema®SB71 (100x100 mm) umieszczonego na podłożu balistycznym. Symulacje numeryczne 3D zrealizowano w programie do analiz dynamicznych Ansys Autodyn v14. W oparciu o dane literaturowe oraz własne wyniki zrzutu swobodnego ciężarka na plastelinę balistyczną (głębokość deformacji podłoża BFS = 18-24 mm) opracowano zgodny z wynikami badań eksperymentalnych model numeryczny podłoża balistycznego. Jako warunek brzegowy w symulacji uderzenia pocisku w warstwy Dyneema'y®SB71 przyjęto obciążenie paska dociskającego siłą 25 N. W odróżnieniu od badań ostrzałem w symulacji numerycznej oderwała się przednia część płaszcza pocisku oraz nie nastąpiło przebicie żadnej z warstw wyrobu polietylenowego Dyneema®SB71.
Źródło:
Problemy Techniki Uzbrojenia; 2013, 42, 127; 55-64
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies