- Tytuł:
- The possibility of applying acoustic emission method for monitoring lathing process
- Autorzy:
- Dudzik, Krzysztof
- Powiązania:
- https://bibliotekanauki.pl/articles/245585.pdf
- Data publikacji:
- 2019
- Wydawca:
- Instytut Techniczny Wojsk Lotniczych
- Tematy:
-
Acoustic Emission
AE
diagnostic
finishing treatment
lathing
cutting parameters - Opis:
- Nowadays acoustic emission (AE) method is used in many fields of science, including in the diagnosis and monitoring of machining processes such as turning, grinding, milling, etc. Monitoring of turning process allows ensuring stable conditions of treatment. Stable conditions of turning process have a great impact on the quality of the surface. This is especially important during finishing treatment. The research was carried out on a universal ZMM-SLIVEN CU500MRD lathe centre-using tool with removable insert SANDVIK Coromant WNMG 080408 – WMX Wiper. Lathing process was performed on the shaft of 74 mm in diameter made of S235 steel. The research was carried out at constant cutting speed v = 230 m/min. Changed parameters were feed f = 0.1; 0.2; 0.4 mm/rev and cutting depth ap = 0.5; 0.75; 1 mm. In the research was used a set of acoustic emission Vallen System. The kit includes: 4 channel signal recorder AMSY 6, two measurement modules ASIP-2/S, preamplifier with a frequency range 20 kHz – 1 MHz and the strengthening of 34dB and AE signal measurement sensor type VS 150M, with a frequency range 100 – 450 kHz. During the study, the acoustic emission (AE) generated during the lathing process were recorded parameters e.g. amplitude, number of events – hits, the effective value of the signal (RMS). The test results indicate, that the higher instability of the process was during turning with parameters: ap = 0.75 mm and f = 0.1 mm/rev. The study can be the basis for the use of acoustic emission method for monitoring lathing process to ensure stable conditions of that process and the same to obtain a high quality surface.
- Źródło:
-
Journal of KONES; 2019, 26, 2; 21-27
1231-4005
2354-0133 - Pojawia się w:
- Journal of KONES
- Dostawca treści:
- Biblioteka Nauki
Artykuł