Autor: Ozsoy, N - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Comparison of Mechanical Behaviour of Carbon and Glass Fiber Reinforced Epoxy Composites
Autorzy:: Ozsoy, N.
Mimaroğlu, A.
Ozsoy, M.
Powiązania:: https://bibliotekanauki.pl/articles/1401276.pdf
Data publikacji:: 2015-04
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Qk
81.70.Bt
Opis:: An experimental study has been carried out to investigate tensile and bending properties of carbon fiber (CFRE) and glass fiber-reinforced (GFRE) epoxy composites. Three different fiber orientations were applied, 0°, 90° and [0°, 90°]. The laminates were obtained by manual lay-up process. The samples were evaluated by tensile tests according to the ASTM D3039 and bending tests according to the ASTM D790. Experimental results showed that maximum tensile strengths were observed at 0° fiber direction for the both CFRE and GFRE composites. With respect to their tension properties, the CFRE samples had better performance than the GFRE samples, except for the 90° orientation. Three point bending tests proved that in all orientations CFRE composites had better performance, compared to GFRE composites.
Źródło:: Acta Physica Polonica A; 2015, 127, 4; 1032-1034
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 2.

Tytuł:: Mechanical and Tribological Behaviour of Chopped E-Glass Fiber-Reinforced Epoxy Composite Materials
Autorzy:: Ozsoy, N.
Ozsoy, M.
Mimaroglu, A.
Powiązania:: https://bibliotekanauki.pl/articles/1031191.pdf
Data publikacji:: 2017-09
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Qk
07.05.Fb
62.20.Qp
81.70.Bt
Opis:: Chopped E-glass fiber-reinforced epoxy composites (10%, 30% and 50%) were fabricated and their mechanical and tribological behaviour was investigated. Three-point bending tests were performed according to the ASTMD790 and tensile tests were performed according to the ASTMD638 standards. Impact tests and hardness measurements of the composites were also carried out. Wear behaviour of composites was studied using pin on disc wear testing device. The design of experiments approach, using Taguchi method, was employed to analyze the results. Signal-to-noise ratio and analysis of variance were used to determine the influence of parameters on the wear rate and coefficient of friction.
Źródło:: Acta Physica Polonica A; 2017, 132, 3; 852-856
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 3.

Tytuł:: Mechanical properties of chopped carbon fiber reinforced epoxy composites
Autorzy:: Ozsoy, N
Ozsoy, M.
Mimaroglu, A.
Powiązania:: https://bibliotekanauki.pl/articles/1070471.pdf
Data publikacji:: 2016-07
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Qk
81.70.Bt
Opis:: An experimental study has been carried out to investigate tensile, bending, impact and hardness properties of chopped carbon fiber reinforced epoxy composites. Four different weight fractions (0%, 6%, 8%, 10%) were added as reinforcement to composites. The samples were manufactured by using a special designed mold. Tests were carried out according to the ASTM standards. Results of the tests have shown that hardness increases with the increasing amount of carbon fiber in composites. Tensile, bending and impact performances have increased up to 8% of carbon fiber in the composite and then started to decrease.
Źródło:: Acta Physica Polonica A; 2016, 130, 1; 297-299
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Informacja