Autor: Ertürk, A. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Production of Aluminum Glass Fiber Reinforced Foam Synthesized by Space-Holder Technique
Autorzy:: Ertürk, A.
Powiązania:: https://bibliotekanauki.pl/articles/1187253.pdf
Data publikacji:: 2016-04
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Rm
81.05.Bx
83.80.Ab
81.20.Ev
81.70.Bt
Opis:: Aluminum and its reinforced type with glass fiber composite foams were produced by powder sintering process using spherical carbamide particles as a space holder. The foams with 40-60 vol.% porosity fractions were successfully produced after water leaching and sintering methods. Compression test was performed on both of the foam samples for comparing the compressive properties and energy absorption behavior of them. The composite foam samples with glass fiber reinforcement showed higher compressive strength than the parent material foam.
Źródło:: Acta Physica Polonica A; 2016, 129, 4; 592-595
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 2.

Tytuł:: Enhanced Mechanical Performance of Aluminum Glass Fiber Reinforced Foam Material by Cu Modification
Autorzy:: Ertürk, A.
Aydin, I.
Powiązania:: https://bibliotekanauki.pl/articles/1033530.pdf
Data publikacji:: 2017-03
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Bx
81.05.Rm
81.20.Ev
81.70.Bt
Opis:: Glass fiber-reinforced aluminum foam and its modified forms, using 1 and 3 wt.% of Cu, were produced by powder sintering process, using spherical carbamide particles as space holders. The foams with 40 and 60 vol.% porosity fractions were successfully produced after water leaching and sintering procedures. Compression test was performed on foam samples to compare both, the compressive properties and energy absorption behavior of them. The composite foam samples with Cu modification have shown a higher compressive strength than the parent material foam. The average plateau stress and energy absorption capacity of foams produced in this study, achieved via utilizing 3 wt.% Cu, were 7.06 MPa and 3.51 MJ/m³, respectively.
Źródło:: Acta Physica Polonica A; 2017, 131, 3; 470-473
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 3.

Tytuł:: Manufacturing of Al-Zr Thermal-resistant Alloys for Transmission Lines
Autorzy:: Erturk, A.
Guven, E.
Karabay, S.
Powiązania:: https://bibliotekanauki.pl/articles/1401363.pdf
Data publikacji:: 2015-04
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Bx
88.80.H
83.50.Uv
81.70.Jb
81.40.Ef
81.70.Bt
Opis:: The present transmission lines of populous cities will have to be changed with an ability to work at higher temperatures without any weight and cross section changes. Innovative thermal-resistant alloy conductors (T-ACSR) operate in the range of about 150-200°C instead of 75°C which is the standard ACSR type conductor service temperature. In this study, the manufacturing procedure of Al-Zr alloy wire, used as high-temperature conductor wires, have been introduced. The Al-Zr alloy has been cast in a permanent mold than being extruded to a diameter of 10 mm at 400°C. After that the extruded rods have been cold drawn to a diameter of 3.02 mm. Elongation and tensile strength values of the cold drawn wire have been achieved by tensile test at elevated temperatures. Also, microstructural analysis and dispersion hardening procedure have been investigated. The results show that tensile strength and thermal-resistant property are improved by the addition of Zr.
Źródło:: Acta Physica Polonica A; 2015, 127, 4; 1292-1294
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Informacja