Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "b" wg kryterium: Temat


Tytuł:
Low-Dimensional Thermoelectricity
Autorzy:
Heremans, J. P.
Powiązania:
https://bibliotekanauki.pl/articles/2043708.pdf
Data publikacji:
2005-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
72.10.-d
73.63.-b
81.07.-b
Opis:
Thermoelectric materials are used as solid-state heat pumps and as power generators. The low efficiency of devices based on conventional bulk thermoelectric materials confines their applications to niches in which their advantages in compactness and controllability outweigh that drawback. Recent developments in nanotechnologies have led to the development of thermoelectric nano-materials with double the efficiency of the best bulk materials, opening several new classes of applications for thermoelectric energy conversion technology. We review here first the physical mechanisms that result in the superior thermoelectric performance of low-dimensional solids, compared to bulk thermoelectric materials: they are a reduction of the lattice thermal conductivity, and an increase in the Seebeck coefficient S for a given carrier density. The second part of this review summarizes experimental results obtained on macroscopic arrays of bismuth, antimony, and zinc nanowires with diameters ranging from 200 to 7 nm. We show how size-quantization effects greatly increase S for a given carrier concentration, as long as the diameter of the nanowires remains above 9 nm, below which localization effects start dominating. In a third part, we give data on PbTe nanocomposites, particularly bulk samples containing 30~nm diameter Pb inclusions. These inclusions affect the electron scattering in such a way as to again increase the Seebeck coefficient.
Źródło:
Acta Physica Polonica A; 2005, 108, 4; 609-634
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of AgNPs Incorporated PVA/ODA-MMT and PVP/ODA-MMT Nanofiber Structures by Green Electrospinning Nanotechnology as Excellent Conducting and Bioengineering Nanomaterial
Autorzy:
Bunyatova, U.
Rzayev, Z.
Koçum, İ.
Şimşek, M.
Yürüksoy, M.
Powiązania:
https://bibliotekanauki.pl/articles/1186594.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
Opis:
This work presents synthesis and characterization of novel nanofiber structures from the pure water solution blends of poly(vinyl alcohol, hydrolyzed 89%) (PVA/octadecylamine-montmorillonite (ODA-MMT, 5 mass%) as a matrix and poly(N-vinylpyrrolidone) (PVP)/ODA-MMT (5 mass%) as a partner preintercalated nanocomposites and their AgNPs incorporated derivatives by green electrospinning nanotechnology. The chemical and physical structures, surface morphologies, and conductivities were investigated by the Fourier transform infrared, X-ray diffraction, scanning electron microscopy, conducting analysis methods. The fabricated multifunctional nanofibers predominantly exhibit colloidal-like amorphous structures, which is an important factor to improve tendency to self-assembly and therefore, the conductivities of the nanofiber polyelectrolyte structures. Obtained morphologies of composite nanofibers show cross-section structures with fine diameter distribution with higher contact areas. The nanofiber composites show excellent electrical conductivity at temperature range of 20-45°C. The obtained unique properties of multifunctional nanofiber surfaces with higher contact areas can be used for wide applications in microelectronics, sensor devices, nanolithography (X-ray, E-beam and photoresists), electrochemical (surface functionalized electrods) and bioengineering processing.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 431-435
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon Nanomaterials from Carbon Monoxide Using Nickel and Cobalt Catalysts
Autorzy:
Liszka, B.
Krztoń, A.
Pawlyta, M.
Powiązania:
https://bibliotekanauki.pl/articles/1536422.pdf
Data publikacji:
2010-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
Opis:
Two catalysts, nickel and cobalt, supported on MgO were used for carbon nanomaterials deposition by CO disproportionation. The syntheses were performed at 795 and 900 K in the hydrogen atmosphere. The resulting products were investigated using atomic force microscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. Although in the literature carbon nanofibres are expected to form in the hydrogen presence, we obtained carbon nanotubes, which were multiwall and twisted with the outer diameter of 10-120 nm and the tube length up to 10 μm.
Źródło:
Acta Physica Polonica A; 2010, 118, 3; 471-474
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis of Silver Halide Nanosols
Autorzy:
Michalak, E.
Nowak, P.
Król-Gracz, A.
Dyonizy, A.
Powiązania:
https://bibliotekanauki.pl/articles/1491302.pdf
Data publikacji:
2012-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
Opis:
The aim of this work was to establish the average size of silver halide nanosols. The method applied was based on the optical turbidance measurements in real time of crystallization process. Dilute turbid suspensions of silver bromide, chloride and iodide stabilized by excess of halide ions and gelatin were measured over wavelength range from 450 nm to 600 nm. Experimental results were compared with the scattering theory of Rayleigh. Relation between dosing rate of reactants to dispersion system and size of obtained silver halide crystals was investigated. Interest in crystalline gelatine-stabilised aqueous suspensions of silver halide is due to their application as a substrate for the synthesis of silver nanoparticles.
Źródło:
Acta Physica Polonica A; 2012, 121, 1; 200-202
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterization of Two-Dimensional Ordered Arrays of Metallic Nanoparticles
Autorzy:
Kandulski, W.
Kosiorek, A.
Rybczyński, J.
Bauman, D.
Giersig, M.
Powiązania:
https://bibliotekanauki.pl/articles/2036995.pdf
Data publikacji:
2003-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
Opis:
A method of obtaining large-scale 2D arrays of ordered metallic nanoparticles is presented. The arrays were prepared using nanosphere lithography based on the self-assembly of latex particles on a water surface. Using 496 nm and 1040 nm diameter particles, it was possible to prepare arrays of over one cm$\text{}^{2}$, with defect-free areas of over 50μ m$\text{}^{2}$. By the evaporation of nickel or gold, periodic metallic particle arrays were produced. Modification of the particle array morphology was also shown by using double-layered masks. Computer simulated mask models were used to reveal interesting morphologies obtainable by the application of multilayered masks.
Źródło:
Acta Physica Polonica A; 2003, 104, 5; 495-502
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Topographic Peculiarities of the Formation of Nanosized Particles from Metallopolymers
Autorzy:
Pomogailo, A. D.
Dzhardimalieva, G. I.
Rosenberg, A. S.
Powiązania:
https://bibliotekanauki.pl/articles/2035462.pdf
Data publikacji:
2002-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
81.07.Bc
Opis:
The morphology of solid phase products of thermal transformation of transition metal acrylates or its cocrystallites is studied. The thermal transformation of the metal-containing monomers studied consists in dehydration, solid phase polymerization and thermolysis process. The topography of the initial compounds and solid phase products of thermal decay, as well as their composition, are analyzed by optical and electron microscopies. The average particle sizes, d$\text{}_{EM}$, are: 6.0-13.0 nm in the case of FeAcr$\text{}_{6}$ (based on the data of electron diffraction, the main product is Fe$\text{}_{3}$O$\text{}_{4}$), 6.0 nm for FeCoAcr$\text{}_{8}$ and Fe$\text{}_{2}$CoAcr$\text{}_{14}$ (Fe$\text{}_{3}$O$\text{}_{4}$, CoO, Fe$\text{}_{2}$CoO$\text{}_{4}$), and 6 nm for CoMal$\text{}_{2}$ (CoO). The material formed consists of nanosized metal particles uniformly allotted in polymer matrix.
Źródło:
Acta Physica Polonica A; 2002, 102, 1; 135-145
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
La-Based Material for Energy Storage Applications
Autorzy:
Atalay, F.
Kaya, H.
Bingol, A.
Asma, D.
Powiązania:
https://bibliotekanauki.pl/articles/1032059.pdf
Data publikacji:
2017-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
82.47.Uv
Opis:
In this work, nanostructured La-based materials were produced by chemical precipitation method onto Cladosporium cladosporioides fungal hyphae in aqueous solution. Materials were annealed at various temperatures between 100°C-600°C. The morphological properties of the synthesized material were studied by transmission electron microscopy. The surface area for sample annealed at 360°C was determined to be 85.64 m²/g using Brunauer-Emmett-Teller method. The nitrogen adsorption and desorption isotherm displayed a typical type-IV isotherm. Electrochemical properties of produced material were studied using cyclic voltammetry, long term charge/discharge analysis and impedance spectroscopy in the 0.5 M Na₂SO₄ electrolyte. The obtained nanostructured porous electrode exhibits quasi-rectangular shaped cyclic voltammetry curves with a specific capacitance of 2190 F/g at a scan rate of 2 mV/s.
Źródło:
Acta Physica Polonica A; 2017, 131, 3; 453-456
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photoluminescence Studies of Aluminum Nitride Nanowires
Autorzy:
Yang, J.
Na, H.
Kim, H.
Kebede, M.
Choi, R.
Jeong, J.
Lee, C.
Powiązania:
https://bibliotekanauki.pl/articles/1505466.pdf
Data publikacji:
2011-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
We report the production of AlN nanowires by the thermal heating method, for exploring their photoluminescence properties. The room-temperature photoluminescence properties were investigated with different annealing environment. While broad emissions with peaks at around 2.45 and 2.95 eV were obtained from both unannealed and annealed samples, the additional 2.1 eV peak was found from the annealed samples. We have suggested the possible emission mechanisms based on the assumption that both 2.45 eV peak and 2.1 eV peak are ascribed to the nitrogen vacancies. Annealing in N_2 environment exhibited lower intensities of 2.45 eV peak and 2.1 eV peak in comparison to those in Ar environment, presumably due to the suppression of nitrogen vacancies.
Źródło:
Acta Physica Polonica A; 2011, 119, 2; 125-127
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis, Structure, Photoluminescence, and Raman Spectrum of Indium Oxide Nanowires
Autorzy:
Kim, H.
Na, H.
Yang, J.
Lee,, C.
Powiązania:
https://bibliotekanauki.pl/articles/1505485.pdf
Data publikacji:
2011-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
Production of indium oxide $(In_2O_3)$ whiskers at a very low temperature of 650°C was reported. The synthetic route was comprised of a thermal heating process of a mixture of In and Mg powders. We have investigated the structural properties of the as-synthesized nanowires by using X-ray diffraction and scanning electron microscopy. The product consisted of one-dimensional nanowires, with a crystalline cubic structure of $In_2O_3$. The photoluminescence measurement with the Gaussian fitting exhibited visible light emission bands centered at 2.1 eV and 2.8 eV. The peaks of the Raman spectrum were indexed to the modes being associated with cubic $In_2O_3$.
Źródło:
Acta Physica Polonica A; 2011, 119, 2; 143-145
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
AFM Investigation of Biological Nanostructures
Autorzy:
Strzelecki, J.
Dąbrowski, M.
Strzelecka, J.
Tszydel, M.
Mikulska, K.
Nowak, W.
Balter, A.
Powiązania:
https://bibliotekanauki.pl/articles/1419535.pdf
Data publikacji:
2012-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.64.Dz
81.07.-b
Opis:
Nanostructures created by living organisms, optimized through millions of years of evolution, can be a valuable inspiration for nanotechnology. We employ atomic force microscopy to examine such structures in materials created by common organisms - caddisfly and diatoms. Caddisfly larvae are well known for their ability to spin silk, which serves as an "adhesive tape" to glue various materials and collect food in aqueous environment. Atomic force microscopy imaging of caddisfly silk, performed for the first time by our team, has shown that its surface is patterned with 150 nm extensions - a feature related to its exceptional underwater sticking abilities. Results of force spectroscopy of protein structures found on the surface are also shown. A characteristic feature of diatoms is that they are encased within a unique silica cell wall called frustules, patterned with 200 nm pores, which allow cellular interaction with the environment. We perform atomic force microscopy imaging of frustules in living diatoms as well as adhesion measurements inside pores.
Źródło:
Acta Physica Polonica A; 2012, 122, 2; 329-332
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Physical Properties of SiC-GaAs Nano-Composites
Autorzy:
Kalisz, G.
Grzanka, E.
Wasik, D.
Świderska-Środa, A.
Gierlotka, S.
Borysiuk, J.
Kamińska, M.
Twardowski, A.
Pałosz, B.
Powiązania:
https://bibliotekanauki.pl/articles/2043724.pdf
Data publikacji:
2005-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
07.35.+k
Opis:
Nano-composites consisting of primary phase of hard nanocrystalline SiC matrix and the secondary nanocrystalline semiconductor (GaAs) phase were obtained by high-pressure zone infiltration. The synthesis process occurs in three stages: (i) at room temperature the nanopowder of SiC is compacted along with GaAs under high pressure up to 8 GPa, (ii) the temperature is increased above the melting point of GaAs up to 1600~K and, the pores are being filled with liquid, (iii) upon cooling GaAs nanocrystallites grow in the pores. Synthesis of nano-composites was performed using a toroid-type high-pressure apparatus (IHPP of the Polish Academy of Sciences, Warsaw) and six-anvil cubic press (MAX-80 at HASYLAB, Hamburg). X-ray diffraction studies were performed using a laboratory D5000 Siemens diffractometer. Phase composition, grain size, and macrostrains present in the synthesized materials were examined. Microstructure of the composites was characterized using scanning electron microscopy and high resolution transmission electron microscopy. Far-infrared reflectivity measurements were used to determine built-in strain.
Źródło:
Acta Physica Polonica A; 2005, 108, 4; 717-721
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Antibacterial Properties of Nano $TiO_2$ and ZnO Particle Filled Polymers
Autorzy:
Altan, M.
Yildirim, H.
Powiązania:
https://bibliotekanauki.pl/articles/1293839.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.35.Np
81.07.-b
Opis:
Antibacterial property for the plastic products is very important due to their wide spread usage in many areas close to human health such as a child toy or a food package. There are some methods to make polymers antibacterial such as ionizing radiation but they can be still infected by micro organisms during usage of them. The best and easy way to obtain antibacterial polymers is melt mixing of polymers with antibacterial agents. In this study, nano $TiO_2$ and ZnO particles were mixed with polypropylene and high density polyethylene with a twin screw extruder. Silane was applied to the particles prior melt mixing in order to prevent agglomeration and FT-IR analysis was done to characterize the particles. After melt mixing, particle filled rectangular plates were obtained by plastic injection molding and antibacterial tests were done on the plates according to a standard method, JIS Z 2801. According to the results, satisfactory antibacterial properties were obtained for both polymers and it has been seen that particles without silane could not provide antibacterial effect.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 645-647
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
$SiO_x$ Nanowires Produced on Molybdenum-Coated Si Substrates
Autorzy:
Kim, H.
Lee, J.
Yang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813396.pdf
Data publikacji:
2008-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
We synthesized $SiO_x$ nanowires with diameters of 30-140 nm, for the first time by the simple heating of the Mo-coated Si substrates. X-ray diffraction, selected area electron diffraction, and energy-dispersive X-ray spectroscopy indicated that the nanowires were in an amorphous state, comprising Si and O only. Fitting the photoluminescence spectrum with Gaussian functions revealed that the nanowires exhibited significant photoluminescence intensities near blue and green light regions. We extensively discussed the possible growth mechanism of $SiO_x$ nanowires.
Źródło:
Acta Physica Polonica A; 2008, 113, 3; 1017-1020
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Catalyst-Free Growth of Magnesium Oxide Whiskers and Their Characteristics
Autorzy:
Kim, H.
Kong, M.
Yang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813397.pdf
Data publikacji:
2008-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
This study reports the production of magnesium oxide (MgO) whiskers on silicon (Si) substrates by the thermal heating of $MgB_2$ powders. We investigated the structural properties of the as-synthesized whiskers by using X-ray diffraction, transmission electron microscopy, selected area electron diffraction, and scanning electron microscopy. The product consisted of one-dimensional whiskers with a square cross-section. The whiskers had a single-crystalline cubic structure of MgO. The photoluminescence measurement with the Gaussian fitting exhibited visible light emission bands centered at 2.39 eV and 2.91 eV. We proposed the growth of MgO whiskers to follow the vapor-solid mechanism.
Źródło:
Acta Physica Polonica A; 2008, 113, 3; 1021-1024
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristic properties of Dy-Eu-Ce Co-doped ZrO₂ nanofibers fabricated via electrospinning
Autorzy:
Çıçek Bezır, N.
Evcın, A.
Kayali, R.
Kaşikçi Özen, M.
Esen, K.
Cambaz, E.
Powiązania:
https://bibliotekanauki.pl/articles/1070411.pdf
Data publikacji:
2016-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
81.07.Gf
Opis:
Zirconium oxide (ZrO₂) is one of the widely studied oxide materials because of its excellent electrical, mechanical and optical properties. In this study, undoped and Dy-Eu-Ce co-doped ZrO₂ nanofibers were fabricated by electrospinning method and their crystal structure, surface morphology, optical properties, electrical and electronic properties, and chemical properties have been analyzed using X-ray diffraction, scanning electron microscope (SEM), UV/VIS spectrometer, four point probe technique (FPPT) energy dispersive X-ray (EDX) measurements, respectively.
Źródło:
Acta Physica Polonica A; 2016, 130, 1; 300-303
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies