Wszystkie pola: Ertürk, A. - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Production of Aluminum Glass Fiber Reinforced Foam Synthesized by Space-Holder Technique
Autorzy:: Ertürk, A.
Powiązania:: https://bibliotekanauki.pl/articles/1187253.pdf
Data publikacji:: 2016-04
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Rm
81.05.Bx
83.80.Ab
81.20.Ev
81.70.Bt
Opis:: Aluminum and its reinforced type with glass fiber composite foams were produced by powder sintering process using spherical carbamide particles as a space holder. The foams with 40-60 vol.% porosity fractions were successfully produced after water leaching and sintering methods. Compression test was performed on both of the foam samples for comparing the compressive properties and energy absorption behavior of them. The composite foam samples with glass fiber reinforcement showed higher compressive strength than the parent material foam.
Źródło:: Acta Physica Polonica A; 2016, 129, 4; 592-595
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 2.

Tytuł:: Enhanced Mechanical Performance of Aluminum Glass Fiber Reinforced Foam Material by Cu Modification
Autorzy:: Ertürk, A.
Aydin, I.
Powiązania:: https://bibliotekanauki.pl/articles/1033530.pdf
Data publikacji:: 2017-03
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Bx
81.05.Rm
81.20.Ev
81.70.Bt
Opis:: Glass fiber-reinforced aluminum foam and its modified forms, using 1 and 3 wt.% of Cu, were produced by powder sintering process, using spherical carbamide particles as space holders. The foams with 40 and 60 vol.% porosity fractions were successfully produced after water leaching and sintering procedures. Compression test was performed on foam samples to compare both, the compressive properties and energy absorption behavior of them. The composite foam samples with Cu modification have shown a higher compressive strength than the parent material foam. The average plateau stress and energy absorption capacity of foams produced in this study, achieved via utilizing 3 wt.% Cu, were 7.06 MPa and 3.51 MJ/m³, respectively.
Źródło:: Acta Physica Polonica A; 2017, 131, 3; 470-473
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 3.

Tytuł:: Novel Molding Method and Enhanced Cell Homogeneity in the Powder Metallurgical Route for Production of Closed Cell Al-Foam
Autorzy:: Erturk, A.
Sahin, T.
Powiązania:: https://bibliotekanauki.pl/articles/1033369.pdf
Data publikacji:: 2017-01
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 81.05.Rm
82.33.Ln
61.43.Gt
61.05.cp
68.37.Hk
Opis:: TiH₂ content, mixing, pressing, different mold filling rate as the factors which affect foaming process on the powder metallurgical route were investigated. TiH₂ was added in the amount of 0.5-1-1.5-2 wt% to adjust the proper amount. Differential scanning calorimetry tests were conducted on the TiH₂ powders in order to obtain optimum hydrogen releasing condition. Aluminum and TiH₂ powders were blended with the different speed-time combination. The mix was compacted at different pressures with the aim of explaining of the oxide layer deformation. An acceptance-rejection criterion was developed and used in pore analysis. Also, the using of a borosilicate glass molding technique are completely original and a new approach.
Źródło:: Acta Physica Polonica A; 2017, 131, 1; 39-42
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Informacja