Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "61.80.-x" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Doping and Irradiation Dependence of Electrical Conductivity of $Fe^{3+}$ and $Ni^{2+}$ Doped Polyvinyl Alcohol Films
Autorzy:
Vijaya Kumar, G.
Chandramani, R.
Powiązania:
https://bibliotekanauki.pl/articles/1537708.pdf
Data publikacji:
2010-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.55.Ln
72.80.Le
61.80.x
Opis:
PVA and doped PVA films were prepared by solution casting. The Change in electrical conductivity of pure PVA and transition elements $FeCl_3$ and $NiCl_2 \cdot 6H_2O$ doped PVA films with and without γ-irradiation in the temperature range 50-130°C has been investigated using four point probe technique. The dc electrical conductivity increases with increase in dopant concentration, with temperature and γ-irradiation. The results revealed that γ-irradiation enhances the electrical conductivity. The variation of electrical conductivity σ with temperature, before and after irradiation is due to the intermolecular hydrogen bonding between $Fe^{3+}$ with OH group of PVA and $Ni^{2+}$ with OH group of PVA. We found that $Fe^{3+}$ doped PVA films show higher conductivity than $Ni^{2+}$ doped PVA films.
Źródło:
Acta Physica Polonica A; 2010, 117, 6; 917-920
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties of the Stellite 6 Cobalt Alloy Implanted with Nitrogen Ions
Autorzy:
Budzyński, P.
Kamiński, M.
Wiertel, M.
Pyszniak, K.
Droździel, A.
Powiązania:
https://bibliotekanauki.pl/articles/1030127.pdf
Data publikacji:
2017-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.55.Ln
62.20.Qp
61.82.Bg
61.80.-x
Opis:
The effect of nitrogen ion implantation on Stellite 6 cobalt alloy was investigated. In this research, cobalt alloy was implanted with 65 keV nitrogen ions at the fluence of (1÷10)×10¹⁶ N⁺/cm². The distribution of implanted nitrogen ions and vacancies produced by them was calculated using the SRIM program. The surface morphology was examined and the elemental analysis was performed using scanning electron microscopy, energy dispersive X-ray spectroscopy and grazing incidence X-ray diffraction. The wear tests were conducted with the use of the pin-on-disc method. The results demonstrate that implantation with nitrogen ions significantly reduces the friction factor and wear. The friction coefficient of the implanted sample at the fluence of 1×10¹⁷ N⁺/cm² increased to the values characteristic of an unimplanted sample after 5000 measurement cycles. The depth of the worn trace was about 2.0 μm. This implies that the thickness of the layer modified by the implantation process is ≈2.0 μm and exceeds the initial range of the implanted ions by an order of magnitude. This is referred to as a long-range implantation effect. The investigations have shown that the long-range effect is caused by movement of not only implanted nitrogen atoms but also carbon dopant atoms towards the friction zone. Diffusion of carbon atoms has been documented here for the first time. Furthermore, the increased content of oxygen atoms on the track bottom indicates a dominant oxidative wear of the Stellite samples after nitrogen implantation with the energy 65 keV and the fluences of 5×10¹⁶ and 10¹⁷ N⁺/cm².
Źródło:
Acta Physica Polonica A; 2017, 132, 2; 203-205
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Long-Range Effect in Ion-Implanted Titanium Alloys
Autorzy:
Budzynski, P.
Sielanko, J.
Powiązania:
https://bibliotekanauki.pl/articles/1402208.pdf
Data publikacji:
2015-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
68.55.Ln
62.20.Qp
61.82.Bg
61.80.-x
Opis:
Surface modification of titanium alloy (Ti6Al4V) by nitrogen ion implantation and ion beam-assisted deposition (C, N) was investigated. The depth distribution of implanted nitrogen atoms was analysed using the Rutherford backscattering technique. Nitrogen implantation reduces the coefficient of friction and wear. A better effect can be obtained when nitrogen implantation is combined with carbon deposition. Based on the changes in the coefficients of friction and wear as well as profilograms of wear tracks, the improvement of the tribological properties was found at a depth exceeding nearly 5 times the range of the implanted nitrogen ions. Identification of the long-range effect for Ti6Al4V alloy was performed on the basis of tribological analyses. This study is a continuation of research conducted for AISI 316L and H11 steel.
Źródło:
Acta Physica Polonica A; 2015, 128, 5; 841-844
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies