Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Yilmaz, S." wg kryterium: Autor


Wyświetlanie 1-4 z 4
Tytuł:
Granite Based Glass-Ceramic Materials
Autorzy:
Bayrak, G.
Yilmaz, S.
Powiązania:
https://bibliotekanauki.pl/articles/1194689.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.43.Fs
62.20.-x
61.05.cp
Opis:
In this study, production possibility of glass and glass-ceramic produced from granite was investigated. The composition of granite based glass bath mixture was 50 wt% granite, 25 wt% dolomite and 25 wt% sodium carbonate. Composition that was grounded and mixed in a ball mill for 2 h was melted at 1500C for 1 h. Glass samples were heat treated for crystallization to produce glass-ceramic materials at 800°C, 900C and 1000C for 2 h to promote internal crystallization. Phase identifications of glass and glass-ceramic materials were investigated by X-ray diffraction analysis. Moreover, hardness and fracture toughness measurement of glass and glass-ceramic materials were applied. Granite based materials after that melting and casting process was found amorphous state by characterization with X-ray diffraction analysis. After the heat treatment processes, crystal phases settled out in glass matrix were also determined in granite based materials. Moreover, values of hardness and fracture toughness increasing were detected by heat treatment schedule.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 623-625
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sintering Behavior and Machinability in Mica Glass-Ceramic of the System $SiO_2-Al_2O_3-MgO-K_2O-B_2O_3-F$
Autorzy:
Ercenk, E.
Yilmaz, S.
Powiązania:
https://bibliotekanauki.pl/articles/1293704.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.05.cp
68.37.Hk
81.20.Ev
81.20.Wk
81.05.Je
81.05.Mh
Opis:
Mica glass-ceramic was prepared by sintering method from in the $SiO_2-Al_2O_3-MgO-K_2O-B_2O_3-F_2$ system. The sintering behavior and machinability of a glass-ceramic composition were examined. The starting materials were mixed and milled in an alumina ball mill for 2 h. Then the powders were sieved to obtain grain sizes smaller than 75 μm. For the shaping process, disc samples were prepared by pressing at 100 MPa. The pressed discs were sintered at temperatures in the range from 900 to 1200C for 2 h in an electric furnace using a heating rate of 5°C/min. X-ray diffraction analysis, scanning electron microscopy, and machinability tests for characterization were performed on sintered samples. The results showed that all samples exhibited similar phases formation and good machinability.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 629-631
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bond Strength of Basalt Based Glass-Ceramic Coatings
Autorzy:
Bayrak, G.
Ercenk, E.
Sen, U.
Yilmaz, S.
Powiązania:
https://bibliotekanauki.pl/articles/1194582.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.43.Fs
62.20.-x
61.05.cp
Opis:
In the present study, powders produced from the volcanic basalt rocks were coated on pre-coated AISI 1040 steel with Ni-5% Al bond coat by atmospheric plasma spray coating technique. The coated specimens were characterized by optical microscopy, scanning electron microscopy, metallography and X-ray diffraction. Bonding strength of coatings was evaluated in accordance with the ASTM C-633 method. Coated basalt material from the APS coating system was determined in the glassy amorphous state by X-ray diffraction analysis. The coated samples were heat-treated at 800C for 1-4 h for crystallization. The phases formed in the basalt base glass-ceramic coatings were augite, Fe-diopside, anorthite, and andesine which were detected by X-ray diffraction analysis. Basalt based glass-ceramic coatings include splat, porosity and un-melted particles which were the characteristic of plasma sprayed coatings. Experiment result showed that the crystallization time increase caused the decrease of the bond strengths of the coatings.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 620-622
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Glass and Glass-Ceramics Produced from Fly Ash and Boron Waste
Autorzy:
Ercenk, E.
Sen, U.
Bayrak, G.
Yilmaz, S.
Powiązania:
https://bibliotekanauki.pl/articles/1181592.pdf
Data publikacji:
2014-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.43.Fs
64.70.P-
61.05.cp
81.70.Pg
62.20.Qp
Opis:
In the current study, the effect of boron waste addition on some properties of fly ash based glass and glass-ceramics were investigated. The powder compositions including 10, 30, and 50 wt% boron waste was prepared. All the investigated compositions were melted at 1500C by using electrical furnaces. Melting structures were cast into the graphite mold. Thus, fly ash-boron waste based glass materials were produced. To transform the glass-ceramic, crystallization process was performed. Crystallization and glass-transition temperatures were determined by differential thermal analysis. Highly dense and crystalline materials, predominantly composed of diopside and augite together with tincalconite and residual glassy phase, were detected by X-ray diffraction analysis after heat treatment at 800, 900, and 1000C for 1 h. For the glass and glass-ceramic samples, mechanical tests such as hardness and fracture toughness were realized. A boron waste addition has a positive effect on the hardness of the specimens unlike the fracture toughness results. Furthermore, produced glass-ceramic materials were characterized via scanning electron microscopy.
Źródło:
Acta Physica Polonica A; 2014, 125, 2; 626-628
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-4 z 4

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies