Temat: JS - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: The Effect of Material Composition of Piezoelectric Elements with Chosen Shapes on Plate Vibration Reduction
Autorzy:: Wiciak, J.
Trojanowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/1197495.pdf
Data publikacji:: 2014-04
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 43.40.-r
43.28.Js
46.40.Ff
Opis:: This paper presents numerical analysis of efficiency of different shapes and material composition of piezoelectric actuators used for vibration reduction. Four numerical models representing a plate clamped on all sides with two attached piezoelectric elements were created. For each model, one element had the same shape and composition and was used for plate excitation, and the other one, used for vibration reduction, had different shape and possibly material composition and could be of square or circular shape with either homogeneous or two-part material composition. Two modes were taken into account: the first mode and the fifth mode. Analysis of results was performed with ANSYS software.
Źródło:: Acta Physica Polonica A; 2014, 125, 4A; A-179-A-182
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 2.

Tytuł:: Comparison of Vibration and Acoustic Pressure Reduction Using Different Types of Piezo actuators
Autorzy:: Wiciak, J.
Trojanowski, R.
Powiązania:: https://bibliotekanauki.pl/articles/1402184.pdf
Data publikacji:: 2015-07
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 43.40.-r
43.28.Js
46.40.Ff
Opis:: This paper presents results of numerical simulations on reduction of sound pressure radiated from a square plate using different types of piezo actuators. For this purpose a FEM model was developed using ANSYS software with said steel plate with a hemisphere of air on one side of the plate. There are two criteria by which the reduction is measured: minimising vibrations of plate area and minimising sound pressure on a half sphere surrounding the plate. Changes in the results for both the radiated sound pressure and plate vibration are discussed.
Źródło:: Acta Physica Polonica A; 2015, 128, 1A; A-62-A-66
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Skocz do pozycji: 3.

Tytuł:: Comparison of Efficiency of Different Shapes of Homogeneous and Two-Part Piezo Elements on Vibration Reduction
Autorzy:: Trojanowski, R.
Wiciak, J.
Powiązania:: https://bibliotekanauki.pl/articles/1418045.pdf
Data publikacji:: 2012-11
Wydawca:: Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:: 43.28.Js
43.40.-r
46.40.Ff
Opis:: The subject of this work is a numerical analysis of efficiency of different piezo element shapes and types used for vibration (and later structural sound) reduction. The shapes of both types of piezo elements used are as follows: square, right-angled triangle, and parallelogram. There are 2 types of piezo elements used in this study: homogeneous elements and elements consisting of 2 parts (inner and outer) of different composition. These are attached to steel plate clamped on all sides. For every simulation 5 elements are used as actuators, with 1 as disturbance source, and other 4 as active dampers. On the other side of a plate 4 elements are placed acting as vibration sensors. The actuator used as a disturbance source as well as sensors are always in the shape of a square. 4 modes were taken into account (analyzed each one singular and all together). Analyses were made with the use of ANSYS software.
Źródło:: Acta Physica Polonica A; 2012, 122, 5; 905-907
0587-4246
1898-794X
Pojawia się w:: Acta Physica Polonica A
Dostawca treści:: Biblioteka Nauki

Artykuł

Informacja